Preparation of solution processed photodetectors comprised of two-dimensional tin(ii) sulfide nanosheet thin films assembled via the Langmuir-Blodgett method.
Ontology highlight
ABSTRACT:
SUBMITTER: Norton K
PROVIDER: S-EPMC9037678 | biostudies-literature | 2021 Aug
REPOSITORIES: biostudies-literature
Publications
Preparation of solution processed photodetectors comprised of two-dimensional tin(ii) sulfide nanosheet thin films assembled <i>via</i> the Langmuir-Blodgett method.
Norton Kane K Jacobs Janet J Neilson Joseph J Hopkinson David D Mokhtar Mohammad Z MZ Curry Richard J RJ Lewis David J DJ
RSC advances 20210806 43
We report the manufacture of fully solution processed photodetectors based on two-dimensional tin(ii) sulfide assembled <i>via</i> the Langmuir-Blodgett method. The method we propose can coat a variety of substrates including paper, Si/SiO<sub>2</sub> and flexible polymer allowing for a potentially wide range of applications in future optoelectronic devices. ...[more]
Similar Datasets
Project description:We demonstrate the formation of a well-organized thin film of two-dimensional (2D) layered (C18H37NH3)2PbI4 hybrid perovskite by immersing octadecyl amine (ODA) Langmuir-Blodgett (LB) films in an aqueous solution of PbI2/HI. The immersed films exhibit a sharp absorption band at 486 nm (2.55 eV), which is assigned to the excitonic absorption. The film exhibits a bright green emission under ultraviolet light at room temperature. The photoluminescence spectrum has a distinct peak at 497 nm (2.49 eV) and is a mirror image of the absorption spectrum. X-ray diffraction (XRD) analyses reveal that the film has a bilayer-like structure with a d-spacing of 6.4 nm, which is equal to that of a (C18H37NH3)2PbI4 perovskite single crystal with a quantum well (QW) structure. Only intense peaks of the (0 0 l) (l = 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24) reflections are observed in the out-of-plane XRD pattern, indicating that the c axis is vertically oriented with respect to the substrate surface, and the orientational order is remarkably high. Fourier transform infrared spectroscopy reveals that the ODA molecules are protonated in the PbI2/HI solution. These results suggest that the nitrogen atoms of the ODA molecules in the film are protonated in the PbI2/HI solution, and then, inorganic layers of the PbI6 octahedra are intercalated in the alkyl ammonium film to neutralize the positive charge and form a QW structure. Fluorescence microscopy observation reveals that the 2D layered (C18H37NH3)2PbI4 film has a relatively uniform surface, reflecting the well-organized layered structure of the base material (ODA LB film). Because the intercalation process can be applied to various metal cations and halogen anions, we believe that the proposed technique will aid in the development of highly efficient 2D layered organic-inorganic hybrid perovskite materials.
| S-EPMC9798391 | biostudies-literature
Project description:The Langmuir technique was applied for the first time to compare the layers obtained by spreading lipid liquid-crystalline nanoparticles monoolein 1-oleoyl-rac-glycerol (GMO)/Pluronic F108 cubosomes with the monolayers obtained by mixing the same components in chloroform at the air-water interface. The differences in the monolayer behavior and in the acting intermolecular forces were examined. The similarity of the isotherms obtained for the mixed components system and the cubosome-derived layer proved the disintegration of cubosomes into a single monolayer upon contact with the air-water interface. Despite the low Pluronic F108 content in both types of layers, a strong structural role of this stabilizer was also demonstrated. Cubosome-derived systems supported on hydrophilic mica substrates were prepared either using the combined Langmuir-Blodgett and Langmuir-Schaefer technique or via direct adsorption from the solution. The topographies of the obtained layers were studied by atomic force microscopy (AFM). Images obtained in the air mode revealed the disintegration of cubosomes and the formation of large crystallized structures of the polymer, while AFM imaging performed in water confirmed the presence of intact cubosomes on the surface of mica. We proved that the original structure of cubosomes remains on one condition: the films must not dry out; therefore, the aqueous environment must be preserved. This new approach provides an explanation in the ongoing discussion of what happens to lipid nanoparticles with or without cargo when they come into contact with an interface.
| S-EPMC10249408 | biostudies-literature
Project description:Hemocompatibility is one of the major criteria for the successful cardiovascular applicability of novel biomaterials. In this context, monolayers of certain biomolecules can be used to improve surface biocompatibility. To this end, biocoatings incorporating a phospholipid (1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC), an immunosuppressant (cyclosporine A, CsA), and an antioxidant material (lauryl gallate, LG) were fabricated by depositing Langmuir films onto gold or mica substrates using the Langmuir-Blodgett (LB) technique. These LB monolayers were thoroughly characterized by means of quartz crystal microbalance (QCM), atomic force microscopy (AFM), cyclic voltammetry (CV), and contact angle (CA) measurements. The obtained results indicate that the properties of these LB films are modulated by the monolayer composition. The presence of LG in the three-component systems (DOPC-CsA-LG) increases the molecular packing and the surface coverage of the substrate, which affects the wettability of the biocoating. From the different compositions studied here, we conclude that DOPC-CsA-LG monolayers with a DOPC/CsA ratio of 1:1 and LG molar fractions of 0.50 and 0.75 exhibit improved surface biocompatible characteristics. These results open up new perspectives on our knowledge and better understanding of phenomena at the biomaterial/host interface.
| S-EPMC9483916 | biostudies-literature
Project description:To implement large-area solution-processed graphene films in low-cost transparent conductor applications, it is necessary to have the control over the work function (WF) of the film. In this study we demonstrate a straightforward single-step chemical approach for modulating the work function of graphene films. In our approach, chemical doping of the film is introduced at the moment of its formation. The films are self-assembled from liquid-phase exfoliated few-layer graphene sheet dispersions by Langmuir-Blodgett technique at the water-air interfaces. To achieve a single-step chemical doping, metal standard solutions are introduced instead of water. Li standard solutions (LiCl, LiNO3, Li2CO3) were used as n-dopant, and gold standard solution, H(AuCl4), as p-dopant. Li based salts decrease the work function, while Au based salts increase the work function of the entire film. The maximal doping in both directions yields a significant range of around 0.7?eV for the work function modulation. In all cases when Li-based salts are introduced, electrical properties of the film deteriorate. Further, lithium nitrate (LiNO3) was selected as the best choice for n-type doping since it provides the largest work function modulation (by 400?meV), and the least influence on the electrical properties of the film.
| S-EPMC7242397 | biostudies-literature
Project description:Phosphorene is a recently new member of the family of two dimensional (2D) inorganic materials. Besides its synthesis it is of utmost importance to deposit this material as thin film in a way that represents a general applicability for 2D materials. Although a considerable number of solvent based methodologies have been developed for exfoliating black phosphorus, so far there are no reports on controlled organization of these exfoliated nanosheets on substrates. Here, for the first time to the best of our knowledge, a mixture of N-methyl-2-pyrrolidone and deoxygenated water is employed as a subphase in Langmuir-Blodgett trough for assembling the nanosheets followed by their deposition on substrates and studied its field-effect transistor characteristics. Electron microscopy reveals the presence of densely aligned, crystalline, ultra-thin sheets of pristine phosphorene having lateral dimensions larger than hundred of microns. Furthermore, these assembled nanosheets retain their electronic properties and show a high current modulation of 104 at room temperature in field-effect transistor devices. The proposed technique provides semiconducting phosphorene thin films that are amenable for large area applications.
| S-EPMC5037434 | biostudies-literature
Project description:The photochemical synthesis of two-dimensional (2D) nanostructured from semiconductor materials is unique and challenging. We report, for the first time, the photochemical synthesis of 2D tin di/sulfide (PS-SnS₂-x, x = 0 or 1) from thioacetamide (TAA) and tin (IV) chloride in an aqueous system. The synthesized PS-SnS₂-x were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), a particle size distribution analyzer, X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), thermal analysis, UV⁻Vis diffuse reflectance spectroscopy (DR UV⁻Vis), and photoluminescence (PL) spectroscopy. In this study, the PS-SnS₂-x showed hexagonally closed-packed crystals having nanosheets morphology with the average size of 870 nm. Furthermore, the nanosheets PS-SnS₂-x demonstrated reusable photo-degradation of methylene blue (MB) dye as a water pollutant, owing to the stable electronic conducting properties with estimated bandgap (Eg) at ~2.5 eV. Importantly, the study provides a green protocol by using photochemical synthesis to produce 2D nanosheets of semiconductor materials showing photo-degradation activity under sunlight response.
| S-EPMC6410158 | biostudies-literature
Project description:Interparticle energy transfer offers great promise to a diverse range of applications ranging from artificial solar energy harvesting to nanoscale rulers in biology. Here, we assembled InP/ZnS core/shell quantum dot monolayers via the Langmuir-Blodgett technique and studied the effect of ZnS shell thickness on the excitonic energy transfer within these core/shell quantum dots. Three types of InP-based core/shell quantum dot Langmuir-Blodgett assemblies with different ZnS shell thicknesses were assembled. The structural and optical properties of colloidal quantum dots reveal the successful multiple ZnS shell growth, and atomic force microscopy studies show the smoothness of the assembled monolayers. Time-resolved photoluminescence (PL) and fluorescence lifetime imaging microscopy (FLIM) studies of the thick-shell QD monolayer reveal narrower lifetime distribution in comparison with the thin-shell QD monolayer. The interparticle excitonic energy transfer was studied by spectrally resolved PL traces, and higher energy transfer was observed for the thin-shell InP/1ZnS QD monolayer. Finally, we calculated the average exciton energy and indicated that the energy transfer induced exciton energy shift decreased significantly from 95 to 27 meV after multiple ZnS shell growth.
| S-EPMC6057685 | biostudies-literature
Project description:Graphene oxide has been widely deployed in electrical sensors for monitoring physical, chemical, and biological processes. The presence of abundant oxygen functional groups makes it an ideal substrate for integrating biological functional units to assemblies. However, the introduction of this type of defects on the surface of graphene has a deleterious effect on its electrical properties. Therefore, adjusting the surface chemistry of graphene oxide is of utmost relevance for addressing the immobilization of biomolecules, while preserving its electrochemical integrity. Herein, we describe the direct immobilization of glucose oxidase onto graphene oxide-based electrodes prepared by Langmuir-Blodgett assembly. Electrochemical reduction of graphene oxide allowed to control its surface chemistry and, by this, regulate the nature and density of binding sites for the enzyme and the overall responsiveness of the Langmuir-Blodgett biofilm. X-ray photoelectron spectroscopy, surface plasmon resonance, and electrochemical measurements were used to characterize the compositional and functional features of these biointerfaces. Covalent binding between amine groups on glucose oxidase and epoxy and carbonyl groups on the surface of graphene oxide was successfully used to build up stable and active enzymatic assemblies. This approach constitutes a simple, quick, and efficient route to locally address functional proteins at interfaces without the need for additives or complex modifiers to direct the adsorption process.
| S-EPMC10399176 | biostudies-literature
Project description:We study the structure and elastic properties of the bi-heterocyclic azo compound at the air-water interface through surface pressure (π)-area (A) isotherm recording followed by transferring them on hydrophilic and hydrophobic Si surfaces by the Langmuir-Blodgett (LB) deposition method. A substantial change in the area/molecule is observed as a function of subphase pH and temperature. Such parameters strongly influence intramolecular interactions within azo molecules and the interactions between azo molecules and water that manifested in higher surface activity at low temperature and high pH, which in turn modifies the elasticity of azo assembly at the air-water interface. A large pH-dependent hysteresis with negative change in entropy, indicating molecular rearrangements, is observed. Molecular assembly formed at the air-water interface is then transferred onto hydrophilic and hydrophobic Si surfaces at two different surface pressures (5 and 30 mN/m) by the LB technique. The structural analysis performed by X-ray reflectivity and atomic force microscopy techniques suggests that the LB films exhibit an abrupt layered structure on hydrophilic Si, whereas an overall rough film is formed on hydrophobic Si. The coverage and compactness of individual layers are found to increase with the deposition pressure (5 to 30 mN/m).
| S-EPMC7469395 | biostudies-literature
Project description:Quaternary chalcogenide copper zinc tin sulfide (CZTS) nanoparticles are used to make the p-type absorber layer in CZTS solar cells, which are considered more benign alternatives to those based on cadmium telluride (CdTe) and less expensive than copper indium gallium selenide. CZTS has an ideal band gap and a high absorption coefficient for solar radiation, making the nanoparticles an attractive option for photovoltaic cells. In this work, we explore the toxicity of CZTS nanoparticles using an environmentally relevant bacterial model Shewanella oneidensis MR-1. This study also focuses on understanding the stability of CZTS-based thin films and their direct interaction with bacterial cells. Bacterial cell viability, stability of nanoparticles and thin films, as well as mechanisms of toxicity were evaluated using various analytical tools. The CZTS nanoparticle suspensions show significant acute toxic effects on bacterial cells, but long-term (72 h) exposure of bacterial cells to CZTS-based thin films (made from nanoparticles) do not exhibit similar detrimental impacts on bacterial viability. This result is compelling because it suggests that CZTS nanomaterials will have minimal unintended toxicity as long as they are incorporated into a stable film structure.
| S-EPMC10329415 | biostudies-literature