Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Carbonization of cellulose cell wall evaluated with ultraviolet microscopy.

ABSTRACT: This is the first study of cellulose carbonization in the interior of cell walls. Cotton cellulose was pyrolyzed under nitrogen or in aromatic solvents (benzophenone, diphenyl sulfide, and 1,3-diphenoxybenzene) at 280 °C, and cross sections of the cell walls were examined using ultraviolet (UV) microscopy. After pyrolysis under nitrogen, UV absorption caused by carbonization appeared inside the cell walls. The absorptivity of the cell interiors was homogeneous and slightly lower than that of the cell surfaces. The UV spectra had maximal absorption at ca. 250 nm. The spectra of model compounds and Py-GC/MS analysis data suggested that furanic and polycyclic aromatic structures were present in the carbonized products. The use of aromatic solvents decreased the yields of solid carbonized products and the UV absorptivity, which remained homogeneous throughout the cross sections. The mechanism of cellulose carbonization in cell walls is discussed along with the influence of aromatic solvents.

SUBMITTER: Nomura T

PROVIDER: S-EPMC9049861 | biostudies-literature | 2020 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Carbonization of cellulose cell wall evaluated with ultraviolet microscopy.

Nomura Takashi T Minami Eiji E Kawamoto Haruo H

RSC advances 20200219 13

This is the first study of cellulose carbonization in the interior of cell walls. Cotton cellulose was pyrolyzed under nitrogen or in aromatic solvents (benzophenone, diphenyl sulfide, and 1,3-diphenoxybenzene) at 280 °C, and cross sections of the cell walls were examined using ultraviolet (UV) microscopy. After pyrolysis under nitrogen, UV absorption caused by carbonization appeared inside the cell walls. The absorptivity of the cell interiors was homogeneous and slightly lower than that of the ...[more]

PMID: 35492167

Similar Datasets

Electron microscopy studies of cell-wall-anchored cellulose (Avicel)-binding protein (AbpS) from Streptomyces reticuli.

Project description:Streptomyces reticuli produces a 35-kDa cellulose (Avicel)-binding protein (AbpS) which interacts strongly with crystalline cellulose but not with soluble types of cellulose. Antibodies that were highly specific for the NH2-terminal part of AbpS were isolated by using truncated AbpS proteins that differed in the length of the NH2 terminus. Using these antibodies for immunolabelling and investigations in which fluorescence, transmission electron, or immunofield scanning electron microscopy was used showed that the NH2 terminus of AbpS protrudes from the murein layer of S. reticuli. Additionally, inspection of ultrathin sections of the cell wall, as well as biochemical experiments performed with isolated murein, revealed that AbpS is tightly and very likely covalently linked to the polyglucane layer. As AbpS has also been found to be associated with protoplasts, we predicted that a COOH-terminal stretch consisting of 17 hydrophobic amino acids anchors the protein to the membrane. Different amounts of AbpS homologues of several Streptomyces strains were synthesized.

| S-EPMC91118 | biostudies-literature

Hydroxymethylfurfural as an Intermediate of Cellulose Carbonization.

Project description:Hydrogen bond donor solvents such as aromatic solvents inhibit the secondary degradation of cellulose-derived primary pyrolysis products. In a previous study, we found that the formation of solid carbonized products was completely inhibited during cellulose pyrolysis in aromatic solvents, with 5-hydroxymethylfurfural (5-HMF) recovered in certain yields instead. This indicated that 5-HMF is an intermediate in cellulose carbonization. To confirm this hypothesis, the thermal reactivity of 5-HMF was investigated. At 280 °C, pure 5-HMF polymerized into a hard glassy substance through OH group elimination, but further conversion was slow. When pyrolyzed in the presence of glycerol, a model of coexisting primary pyrolysis products from cellulose, a coupling reaction proceeded. Reactions characteristic of cellulose carbonization then occurred, including the formation of acidic groups and benzene-type structures in the solid products. These results confirmed the above hypothesis. The molecular mechanism of cellulose carbonization is discussed, focusing on the crystalline nature.

| S-EPMC8173002 | biostudies-literature

Bacterial cell wall nanoimaging by autoblinking microscopy.

Project description:Spurious blinking fluorescent spots are often seen in bacteria during single-molecule localization microscopy experiments. Although this 'autoblinking' phenomenon is widespread, its origin remains unclear. In Deinococcus strains, we observed particularly strong autoblinking at the periphery of the bacteria, facilitating its comprehensive characterization. A systematic evaluation of the contributions of different components of the sample environment to autoblinking levels and the in-depth analysis of the photophysical properties of autoblinking molecules indicate that the phenomenon results from transient binding of fluorophores originating mostly from the growth medium to the bacterial cell wall, which produces single-molecule fluorescence through a Point Accumulation for Imaging in Nanoscale Topography (PAINT) mechanism. Our data suggest that the autoblinking molecules preferentially bind to the plasma membrane of bacterial cells. Autoblinking microscopy was used to acquire nanoscale images of live, unlabeled D. radiodurans and could be combined with PALM imaging of PAmCherry-labeled bacteria in two-color experiments. Autoblinking-based super-resolved images provided insight into the formation of septa in dividing bacteria and revealed heterogeneities in the distribution and dynamics of autoblinking molecules within the cell wall.

| S-EPMC6145920 | biostudies-literature

Ultraviolet Hyperspectral Interferometric Microscopy.

Project description:Ultraviolet (UV) spectroscopy is a powerful tool for quantitative (bio)chemical analysis, but its application to molecular imaging and microscopy has been limited. Here we introduce ultraviolet hyperspectral interferometric (UHI) microscopy, which leverages coherent detection of optical fields to overcome significant challenges associated with UV spectroscopy when applied to molecular imaging. We demonstrate that this method enables quantitative spectral analysis of important endogenous biomolecules with subcellular spatial resolution and sensitivity to nanometer-scaled structures for label-free molecular imaging of live cells.

| S-EPMC6028425 | biostudies-literature

COBRA-LIKE4 modulates cellulose synthase velocity and facilitates cellulose deposition in the secondary cell wall.

Project description:Cellulose is a critical component of secondary cell walls (CWs) and woody tissues of plants. Cellulose synthase (CESA) complexes (CSCs) produce cellulose as they move within the plasma membrane, extruding glucan chains into the CW that coalesce and often crystallize into cellulose fibrils. Here we examine COBRA-LIKE4 (COBL4), a GPI-anchored protein on the outer leaflet of the plasma membrane that is required for normal cellulose deposition in secondary CWs. Characterization of the Arabidopsis (Arabidopsis thaliana) cobl4 mutant alleles called irregular xylem6, irx6-2 and irx6-3, showed reduced α-cellulose content and lower crystallinity, supporting a role for COBL4 in maintaining cellulose quantity and quality. In live-cell imaging, mNeon Green-tagged CESA7 moved in the plasma membrane at higher speeds in the irx6-2 background compared to wild-type. To test conservation of COBL4 function between herbaceous and woody plants, poplar (Populus trichocarpa) COBL4 homologs PtCOBL4a and PtCOBL4b were transformed into, and rescued, the Arabidopsis irx6 mutants. Using the Arabidopsis secondary CW-inducible VND7-GR system to study poplar COBL4 dynamics, YFP-tagged PtCOBL4a localized to the plasma membrane in regions of high cellulose deposition in secondary CW bands. As predicted for a lipid-linked protein, COBL4 was more mobile in the plane of the plasma membrane than CESA7 or a control plasma membrane marker. Following programmed cell death, COBL4 anchored to the secondary CW bands. These data support a role for COBL4 as a modulator of cellulose organization in the secondary CW, influencing cellulose production, and CSC velocity at the plasma membrane.

| S-EPMC11852337 | biostudies-literature

Continuous Stabilization and Carbonization of a Lignin-Cellulose Precursor to Carbon Fiber.

Project description:The demand for carbon fibers (CFs) based on renewable raw materials as the reinforcing fiber in composites for lightweight applications is growing. Lignin-cellulose precursor fibers (PFs) are a promising alternative, but so far, there is limited knowledge of how to continuously convert these PFs under industrial-like conditions into CFs. Continuous conversion is vital for the industrial production of CFs. In this work, we have compared the continuous conversion of lignin-cellulose PFs (50 wt % softwood kraft lignin and 50 wt % dissolving-grade kraft pulp) with batchwise conversion. The PFs were successfully stabilized and carbonized continuously over a total time of 1.0-1.5 h, comparable to the industrial production of CFs from polyacrylonitrile. CFs derived continuously at 1000 °C with a relative stretch of -10% (fiber contraction) had a conversion yield of 29 wt %, a diameter of 12-15 μm, a Young's modulus of 46-51 GPa, and a tensile strength of 710-920 MPa. In comparison, CFs obtained at 1000 °C via batchwise conversion (12-15 μm diameter) with a relative stretch of 0% and a conversion time of 7 h (due to the low heating and cooling rates) had a higher conversion yield of 34 wt %, a higher Young's modulus (63-67 GPa) but a similar tensile strength (800-920 MPa). This suggests that the Young's modulus can be improved by the optimization of the fiber tension, residence time, and temperature profile during continuous conversion, while a higher tensile strength can be achieved by reducing the fiber diameter as it minimizes the risk of critical defects.

| S-EPMC9118265 | biostudies-literature

Structural Effects of Cellulose on Hydrolysis and Carbonization Behavior during Hydrothermal Treatment.

Project description:This study aims to investigate how the morphology of cellulose influences the hydrolysis and carbonization during hydrothermal treatment at temperatures between 180 and 240 °C. The morphology of cellulose, especially different crystallinities and degrees of polymerization, is represented by microcrystalline cellulose and α-cellulose. Kinetic analysis is considered a tool to allow the determination of the mechanisms of the two types of cellulose during the hydrothermal process. A kinetic model, in which cellulose is assumed to be hydrolyzed to a limited extent, is proposed. Five scenarios are used as models for pyrolysis of nonhydrolyzed cellulose that forms primary char, along with reaction pathways of hydrolyzable cellulose and its derivatives that latterly form secondary char. The morphologies of solid products are in good agreement with the results of the proposed model.

| S-EPMC7271358 | biostudies-literature

Novel cellulose-binding-domain protein in Phytophthora is cell wall localized.

Project description:Cellulose binding domains (CBD) in the carbohydrate binding module family 1 (CBM1) are structurally conserved regions generally linked to catalytic regions of cellulolytic enzymes. While widespread amongst saprophytic fungi that subsist on plant cell wall polysaccharides, they are absent amongst most plant pathogenic fungal cellulases. A genome wide survey for CBM1 was performed on the highly destructive plant pathogen Phytophthora infestans, a fungal-like Stramenopile, to determine if it harbored cellulolytic enzymes with CBM1. Only five genes were found to encode CBM1, and none were associated with catalytic domains. Surveys of other genomes indicated that the CBM1-containing proteins, lacking other domains, represent a unique group of proteins largely confined to the Stramenopiles. Immunolocalization of one of these proteins, CBD1, indicated that it is embedded in the hyphal cell wall. Proteins with CBM1 domains can have plant host elicitor activity, but tests with Agrobacterium-mediated in planta expression and synthetic peptide infiltration failed to identify plant hypersensitive elicitation with CBD1. A structural basis for differential elicitor activity is proposed.

| S-EPMC3160888 | biostudies-literature

DEFECTIVE KERNEL1 regulates cellulose synthesis and affects primary cell wall mechanics.

Project description:The cell wall is one of the defining features of plants, controlling cell shape, regulating growth dynamics and hydraulic conductivity, as well as mediating plants interactions with both the external and internal environments. Here we report that a putative mechanosensitive Cys-protease DEFECTIVE KERNEL1 (DEK1) influences the mechanical properties of primary cell walls and regulation of cellulose synthesis. Our results indicate that DEK1 is an important regulator of cellulose synthesis in epidermal tissue of Arabidopsis thaliana cotyledons during early post-embryonic development. DEK1 is involved in regulation of cellulose synthase complexes (CSCs) by modifying their biosynthetic properties, possibly through interactions with various cellulose synthase regulatory proteins. Mechanical properties of the primary cell wall are altered in DEK1 modulated lines with DEK1 affecting both cell wall stiffness and the thickness of the cellulose microfibril bundles in epidermal cell walls of cotyledons.

| S-EPMC10043484 | biostudies-literature

The Expandables: Cracking the Staphylococcal Cell Wall for Expansion Microscopy.

Project description:Expansion Microscopy (ExM) is a novel tool improving the resolution of fluorescence microscopy by linking the sample into a hydrogel that gets physically expanded in water. Previously, we have used ExM to visualize the intracellular Gram-negative pathogens Chlamydia trachomatis, Simkania negevensis, and Neisseria gonorrhoeae. Gram-positive bacteria have a rigid and thick cell wall that impedes classic expansion strategies. Here we developed an approach, which included a series of enzymatic treatments resulting in isotropic 4× expansion of the Gram-positive pathogen Staphylococcus aureus. We further demonstrate the suitability of the technique for imaging of planktonic bacteria as well as endocytosed, intracellular bacteria at a spatial resolution of approximately 60 nm with conventional confocal laser scanning microscopy.

| S-EPMC8008081 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data