Dataset Information

Preparation of a carboxymethyl β-cyclodextrin polymer and its rapid adsorption performance for basic fuchsin.

ABSTRACT: The presence of dyes in a water system has potential adverse effects on the ecological environment. The conventional cyclodextrin (CD) polymer only has CD cavities as adsorption sites and exhibits slow adsorption for dye removal. In this study, we designed a novel carboxymethyl β-CD polymer (β-CDP-COOH). The structural properties of β-CDP-COOH were characterized as an irregular cross-linked polymer with negative surface charge, and the introduction of carboxymethyl groups greatly enhanced the adsorption ability of the β-CD polymer to basic fuchsin (BF). The maximum removal efficiency of β-CDP-COOH (96%) could be achieved within 1 min, whereas that of conventional β-CD polymer (70%) was achieved after 50 min. The adsorption mechanism revealed that the adsorption behavior of β-CDP-COOH could be effectively fitted with the pseudo-second-order kinetic model and Langmuir isotherm. Both CD cavities and carboxymethyl groups were effective adsorption sites, so β-CDP-COOH had an advantage in adsorption capacity over the conventional β-CD polymer. This study indicated that β-CDP-COOH is a potential highly efficient adsorbent for the removal of cationic dye contaminants.

SUBMITTER: Pu H

PROVIDER: S-EPMC9054275 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Preparation of a carboxymethyl β-cyclodextrin polymer and its rapid adsorption performance for basic fuchsin.

Pu Hongyu H Tang Peixiao P Zhao Ludan L Sun Qiaomei Q Zhai Yuanming Y Li Zhiqiang Z Gan Na N Liu Yuanyuan Y Ren Xiuyun X Li Hui H

RSC advances 20200501 35

The presence of dyes in a water system has potential adverse effects on the ecological environment. The conventional cyclodextrin (CD) polymer only has CD cavities as adsorption sites and exhibits slow adsorption for dye removal. In this study, we designed a novel carboxymethyl β-CD polymer (β-CDP-COOH). The structural properties of β-CDP-COOH were characterized as an irregular cross-linked polymer with negative surface charge, and the introduction of carboxymethyl groups greatly enhanced the ad ...[more]

PMID: 35517770

Similar Datasets

Project description:This study presents a novel polymer nanocomposite based on carboxymethyl cellulose and β-cyclodextrin crosslinked with succinic acid (CMC-SA-β-CD) containing nickel cobaltite (NCO) nano-reinforcement. Various analytical techniques have been employed to investigate the structural, thermal, and morphological features of the resulting nanocomposite. The CMC-SA-β-CD/NCO nanocomposite has been utilized as an adsorbent for the removal of bisphenol-A (BPA, R% <40 %), malachite green (MG, R% > 75 %)), and Congo red (CR, no adsorption) from the synthetic wastewater. The study systematically explored the impact of various parameters on the adsorption process, and the interactions between MG and CMC-SA-β-CD/NCO were discussed. The adsorption data were fitted to different models to elucidate the kinetics and thermodynamics of the adsorption process. An artificial neural network (ANN) analysis was employed to train the experimental dataset for predicting adsorption outcomes. Despite a low BET surface area (0.798 m2 g-1), CMC-SA-β-CD/NCO was found to exhibit high MG adsorption capacity. CMC-SA-β-CD/NCO exhibited better MG adsorption performance at pH 5.5, 40 mg L-1 MG dye concentration, 170 min equilibrium time, 20 mg CMC-SA-β-CD/NCO dose with more than 90 % removal efficiency. Moreover, the thermodynamic studies suggest that the adsorption of MG was exothermic with ΔH° value -9.93 ± 0.76 kJ mol-1. The isotherm studies revealed that the Langmuir model was the best model to describe the adsorption of MG on CMC-SA-β-CD/NCO indicating monolayer surface coverage with Langmuir adsorption capacity of 182 ± 4 mg g-1. The energy of adsorption (11.4 ± 0.8 kJ mol-1) indicated chemisorption of MG on the composite surface. The kinetics studies revealed that the pseudo-first-order model best described the adsorption kinetics with q e = 86.7 ± 2.9 mg g-1. A good removal efficiency (>70 %) was retained after five regeneration reuse cycles. The ANN-trained data showed good linearity between predicted and actual data for the adsorption capacity (R-value>0.99), indicating the reliability of the prediction model. The developed nanocomposite, composed predominantly of biodegradable material, is facile to synthesize and exhibited excellent monolayer adsorption of MG providing a new sustainable adsorbent for selective MG removal.

Dataset Information

Preparation of a carboxymethyl β-cyclodextrin polymer and its rapid adsorption performance for basic fuchsin.

Publications

Preparation of a carboxymethyl β-cyclodextrin polymer and its rapid adsorption performance for basic fuchsin.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets