Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nano-Fe₃O₄@walnut shell/Cu(ii) as a highly effective environmentally friendly catalyst for the one-pot pseudo three-component synthesis of 1,3-oxazine derivatives under solvent-free conditions.

ABSTRACT: Fe₃O₄@walnut shell/Cu(ii) as an eco-friendly bio-based magnetic nano-catalyst was prepared by adding CuCl₂ to Fe₃O₄@walnut shell in alkaline medium. A series of 2-aryl/alkyl-2,3-dihydro-1H-naphtho[1,2-e][1,3]oxazines were synthesized by the one-pot pseudo three-component reaction of β-naphthol, formaldehyde and various amines using nano-Fe₃O₄@walnut shell/Cu(ii) at 60 °C under solvent-free conditions. The catalyst was removed from the reaction mixture by an external magnet and was reusable several times without any considerable loss of its activity. This protocol has several advantages such as excellent yields, short reaction times, clean and convenient procedure, easy work-up and use of an eco-friendly catalyst.

SUBMITTER: Tafti AD

PROVIDER: S-EPMC9056574 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Nano-Fe3O4@walnut shell/Cu(ii) as a highly effective environmentally friendly catalyst for the one-pot pseudo three-component synthesis of 1,3-oxazine derivatives under solvent-free conditions.

Tafti Arefeh Dehghani AD Fatemeh Mirjalili Bi Bi BB

RSC advances 20200828 53

Fe3O4@walnut shell/Cu(ii) as an eco-friendly bio-based magnetic nano-catalyst was prepared by adding CuCl2 to Fe3O4@walnut shell in alkaline medium. A series of 2-aryl/alkyl-2,3-dihydro-1H-naphtho[1,2-e][1,3]oxazines were synthesized by the one-pot pseudo three-component reaction of β-naphthol, formaldehyde and various amines using nano-Fe3O4@walnut shell/Cu(ii) at 60 °C under solvent-free condition ...[more]

PMID: 35518180

Similar Datasets

Environmentally friendly catalyst- and solvent-free synthesis of 2-anilino nicotinic acids derivatives as potential lead COX inhibitors.

Project description:In this study, an environmentally friendly, solvent- and catalyst-free synthesis of 2-anilino nicotinic acids derivatives is reported. This operationally simple and green procedure was applied to a selection of primary aromatic amines giving rise to 23 derivatives of 2-anilino nicotinic acids in a very short reaction time (15-120 min) with good to excellent yield. Next, similarity searches were executed on these derivatives to find the possible biological target. These products were screened for inhibition of COX-1 and COX-2 by molecular docking and dynamic studies. In silico studies revealed that among these derivatives, the structure 10 bearing meta-chlorine substitutions could act as COX-1 and COX-2 inhibitors. These results can be used in designing important lead compounds for further development as potential anti-inflammatory drugs.

| S-EPMC10662667 | biostudies-literature

Design of a Schiff Base Complex of Copper Coated on Epoxy-Modified Core-Shell MNPs as an Environmentally Friendly and Novel Catalyst for the One-Pot Synthesis of Various Chromene-Annulated Heterocycles.

Project description:An ecofriendly inorganic-organic hybrid and novel Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was successfully designed and prepared from readily available chemicals. In this method, a Schiff base complex as a linker is utilized to protect copper nanoparticles to the core-shell Fe3O4 exterior without agglomeration. The resulted Schiff base complex of copper coated on epoxy-modified Fe3O4@SiO2 MNPs was characterized and confirmed via different analyses such as FT-IR, TGA, XRD, VSM, FE-SEM, TEM, ICP, EDX, and BET. The novel catalyst was examined for the synthesis of various chromene-annulated heterocycles through the one-pot three component reaction of aromatic aldehydes, various phenols (2-hydroxynaphthalene-1,4-dione/resorcinol/β-naphthol), and malononitrile in ethanol at reflux conditions. This method includes important aspects like no usage of column chromatography, very short reaction times, simplicity of product isolation using ethanol, excellent yields, simple procedures, and magnetic recoverability of the catalyst. All in all, our method makes a novel and significant advancement in the synthesis of various chromene-annulated heterocycles.

| S-EPMC8495884 | biostudies-literature

Ag2ZnSnS4-ZnS core-shell colloidal quantum dots: a near-infrared luminescent material based on environmentally friendly elements.

Project description:Low cost, multinary colloidal quantum dots (QDs) based on environmentally friendly elements, with bright, narrow-width, tunable near-infrared (NIR) luminescence are promising alternatives to Cd and Pb chalcogenide QDs for in vivo bio-imaging, LED and sensing applications. Herein, we demonstrate Pb/Cd free solution-processed colloidal luminescent Ag2ZnSnS4-ZnS (AZTS-ZnS) core-shell QDs with precise control over the ZnS shell thickness and thereby its optical properties. Unlike indium based multinary (I-III-VI group) core-shell QDs these nanocrystals show a narrow photoluminescence (PL) full width at half maximum (fwhm) of 105-110 meV in the first NIR window. By monitoring the starting AZTS core size, we achieve tunable emission over a small NIR window in these QDs with the best PL quantum yield (PLQY) of 17.4%.

| S-EPMC8101413 | biostudies-literature

ZnCl2 loaded TiO2 nanomaterial: an efficient green catalyst to one-pot solvent-free synthesis of propargylamines.

Project description:One-pot green synthesis of propargylamines using ZnCl2 loaded TiO2 nanomaterial under solvent-free conditions has been effectively accomplished. The aromatic aldehydes, amines, and phenylacetylene were reacted at 100 °C in the presence of the resultant catalyst to form propargylamines. The nanocrystalline TiO2 was initially synthesized by a sol-gel method from titanium(iv) isopropoxide (TTIP) and further subjected to ZnCl2 loading by a wet impregnation method. X-ray diffraction (XRD) patterns revealed the formation of crystalline anatase phase TiO2. Field emission scanning electron microscopy (FESEM) showed the formation of agglomerated spheroid shaped particles having a size in the range of 25-45 nm. Transmission electron microscopy (TEM) validates cubical faceted and nanospheroid-like morphological features with clear faceted edges for the pure TiO2 sample. Surface loading of ZnCl2 on spheroid TiO2 nanoparticles is evident in the case of the ZnCl2 loaded TiO2 sample. X-ray photoelectron spectroscopy (XPS) confirmed the presence of Ti4+ and Zn2+ species in the ZnCl2 loaded TiO2 catalyst. Energy-dispersive X-ray (EDS) spectroscopy also confirmed the existence of Ti, O, Zn and Cl elements in the nanostructured catalyst. 15% ZnCl2 loaded TiO2 afforded the highest 97% yield for 3-(1-morpholino-3-phenylprop-2-ynyl)phenol, 2-(1-morpholino-3-phenylprop-2-ynyl)phenol and 4-(1,3-diphenylprop-2-ynyl)morpholine under solvent-free and aerobic conditions. The proposed nanostructure-based heterogeneous catalytic reaction protocol is sustainable, environment-friendly and offers economic viability in terms of recyclability of the catalyst.

| S-EPMC9073177 | biostudies-literature

Solvent-Free Environmentally Friendly Method to Prepare Thermo-Reversible Fully Bio-Based Elastomers.

Project description:Most rubber products come from petrochemical resources, which are increasingly in short supply. Rubber products that formed irreversible chemical bonds in the vulcanization process are difficult to recycle, resulting in a serious waste of resources. Therefore, it is important to prepare a kind of reprocessable biobased elastomers. Using furfuryl methacrylate (FMA) as the modified monomer, poly(dibutyl itaconate-myrcene-furfuryl methacrylate) (PDBIMFA) was synthesized by high-temperature emulsion polymerization successfully. The structure and compositions of PDBIMFA were characterized by Fourier transform infrared and 1H NMR, and the effects of different FMA contents on the structures and properties of PDBIMFA were systematically studied. Based on the Diels-Alder reaction, bismaleimide (BMI) and carbon black (CB) were introduced into PDBIMFA as cross-linking agents and reinforcing fillers, respectively, by the melt blending method, and PDBIMFA-BMI elastomer materials and CB/PDBIMFA-BMI elastomer composites with thermo-reversible cross-linking characteristics were prepared. The effects of the ratio of FMA and BMI on the mechanical properties of PDBIMFA-BMI were studied. PDBIMFA-BMI and CB/PDBIMFA-BMI were reprocessed twice, and the recovery rate of tensile strength was both more than 90%. The addition of CB was found to play a reinforcing role in the elastomer and with the introduction of the amount of CB, the reprocessability of composite remained at a good level. It is hoped that this research will provide a new strategy for the sustainable development of bio-based elastomer materials.

| S-EPMC10483686 | biostudies-literature

Zr(HSO4)4: Green, efficient and reusable catalyst for one-pot synthesis of 1,8-dioxooctahydroxanthene under solvent-free conditions.

Project description:Many methods have been used to synthesize xanthene derivatives using different catalysts. However, some of these methodologies have not been entirely satisfactory. Most of the mentioned methods have disadvantages such as low yields, prolonged reaction times, harsh reaction conditions and the requirement of expensive catalysis and use of toxic organic solvent. In this research, a green and highly efficient procedure for the one-pot synthesis of 1,8-dioxo-octahydro-xanthenes has been developed. Zr(HSO4)4 catalyst was used as an efficient and recoverable catalyst for synthesis of 1,8-dioxo-octahydro-xanthene derivatives via cyclocondensation of dimedone and aromatic aldehydes in solvent-free conditions. There are no examples of the use of Zr(HSO4)4 for the synthesis of 1,8-dioxo-octahydro-xanthene derivatives. The present method offers several advantages such as green, highly efficient, recoverable, reusable, simple work-up and simple purification of products. The structure of the synthesized products was confirmed by Fourier Transform Infrared (Ft-IR) and Proton nuclear magnetic resonance (1HNMR) analyzes. The antibacterial activity of the synthesized compounds was determined by agar disk diffusion method against gram-positive (S. aureus bacteria) and gram-negative (E. coli bacteria) microorganisms. Among the synthesized compounds (3a-3j), 3h compound showed the highest antibacterial effect by forming an inhibitory diameter zone of 15 mm around the disc containing 2000 mg of 3h-compound against gram-positive (S. aureus bacteria). 1. Use of Zr(HSO4)4 as a green and highly efficient and reusable heterogeneous catalyst. 2. Under solvent-free condition. 3. Simple work-up and Simple purification of products.

| S-EPMC9450119 | biostudies-literature

Preparation of a Solvent-Resistant Nanofiltration Membrane of Liquefied Walnut Shell Modified by Ethylenediamine.

Project description:N,N-dimethylformamide (DMF) has excellent chemical stability and is widely used as an aprotic polar solvent. In order to reduce production costs and reduce pollution to the surrounding environment, it is necessary to recycle and reuse DMF. Previous research has found that the thin film composite nanofiltration membrane prepared from liquefied walnut shells exhibited a high rejection rate in DMF, but relatively low permeance and mechanical strength. In order to increase permeance without compromising the separation performance, ethylenediamine (EDA) is used as a modifier to graft onto the structure of liquefied walnut shell through the Mannich reaction. Then, modified liquefied walnut shell as an aqueous monomer reacts with trimesoyl chloride (TMC) via the interfacial polymerization method on the EDA-crosslinked polyetherimide (PEI) membrane. The results show that the permeance of the prepared membrane is significantly improved by an order of magnitude, demonstrating a rejection rate of 98% for crystal violet (CV), and a permeance of 3.53 L m-2 h-1 bar-1 in DMF. In conclusion, this study reveals the potential of utilizing liquefied walnut shells as raw materials for preparing high-performance separation membranes and demonstrates that surface modification is a feasible approach to enhance permeance of membranes without sacrificing the rejection rate.

| S-EPMC10456442 | biostudies-literature

AlCl3@ZnO nanostructured material: an efficient green catalyst for the one-pot solvent-free synthesis of 1,4-dihydropyridines.

Project description:AlCl3-loaded ZnO nanoparticles have been explored as an efficient catalyst for 1,4-dihydropyridine synthesis under ambient temperature and solvent-free conditions. For this purpose, ZnO nanoparticles were synthesized by a simple solution-based precipitation technique using a stoichiometric amount of zinc sulfate and oxalic acid. The AlCl3@ZnO nanocrystalline catalyst was prepared by loading 20% AlCl3 on ZnO nanoparticles by a simple wet-impregnation technique. This catalyst efficiently performed Hantzsch pyridine reactions with various aromatic aldehydes, ethyl acetoacetate and ammonium acetate. The nanostructured AlCl3-loaded ZnO catalyst was characterized by UV-DRS, XRD, FESEM, EDS, FETEM-STEM-EDS and XPS techniques. The comprehensive characterization reveals the formation of AlCl3-loaded ZnO catalysts with an average particle size of 70-80 nm. The loading of AlCl3 on the ZnO surface was confirmed by minor shifts in the XPS and XRD peaks. FETEM-STEM-EDS also indicates reasonable AlCl3 loading on ZnO nanoparticles. The 20% AlCl3-loaded ZnO nanocatalyst (AlCl3@ZnO) confers 92% yield for the synthesis of 1,4-dihydropyridine under solvent-free and ambient temperature conditions. The synthesized 1,4-dihydropyridines were characterized by 1H-NMR, 13C-NMR, HRMS and FT-IR spectroscopic techniques. The reported catalyst is highly efficient, environmentally friendly and could become an alternative to homogenous and heterogenous catalytic reactions.

| S-EPMC10437094 | biostudies-literature

Ammonium metavanadate (NH4VO3): a highly efficient and eco-friendly catalyst for one-pot synthesis of pyridines and 1,4-dihydropyridines.

Project description:In this study, we reported the ammonium metavanadate (NH4VO3) as an efficient, cost-effective, and mild catalyst for the synthesis of substituted pyridines via a one-pot pseudo four-component reaction. Furthermore, we investigated Hantzsch 1,4-dihydropyridines (1,4-DHPs) synthesis and oxidation of 1,4-DHPs to their corresponding pyridines. The present approach offers a rapid methodology for accessing various pyridines with broad functional group tolerance and good yields using NH4VO3 catalyst as a green catalyst.

| S-EPMC9372032 | biostudies-literature

Metallosalen modified carbon nitride a versatile and reusable catalyst for environmentally friendly aldehyde oxidation.

Project description:The development of environmentally friendly catalysts for organic transformations is of great importance in the field of green chemistry. Aldehyde oxidation reactions play a crucial role in various industrial processes, including the synthesis of pharmaceuticals, agrochemicals, and fine chemicals. This paper presents the synthesis and evaluation of a new metallosalen carbon nitride catalyst named Co(salen)@g-C3N4. The catalyst was prepared by doping salicylaldehyde onto carbon nitride, and subsequently, incorporating cobalt through Schiff base chemistry. The Co(salen)@g-C3N4 catalyst was characterized using various spectroscopic techniques including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Infrared Spectroscopy (IR), and Thermogravimetric Analysis (TGA). Furthermore, after modification with salicylaldehyde, the carbon nitride component of the catalyst exhibited remarkable yields (74-98%) in oxidizing various aldehyde derivatives (20 examples) to benzoic acid. This oxidation reaction was carried out under mild conditions and resulted in short reaction times (120-300 min). Importantly, the catalyst demonstrated recyclability, as it could be reused for five consecutive runs without any loss of activity. The reusable nature of the catalyst, coupled with its excellent yields in oxidation reactions, makes it a promising and sustainable option for future applications.

| S-EPMC11009278 | biostudies-literature