Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Interface engineering for gain perovskite photodetectors with extremely high external quantum efficiency.

ABSTRACT: Efficient CH₃NH₃PbI₃ photodetectors (PDs) with an extremely high gain of the maximum external quantum efficiency (EQE) of 140 000% within the ultraviolet region to the near infrared region (NIR) and an extremely high responsivity (R) under a low bias of -5 V were successfully fabricated. The fabricated devices manifested outstanding environmental stability with only 10% degradation of EQE after being exposed to air for 24 h. These obtained results indicate the promising potential of perovskite PDs for visible light communication applications.

SUBMITTER: Zhao X

PROVIDER: S-EPMC9056631 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Interface engineering for gain perovskite photodetectors with extremely high external quantum efficiency.

Zhao Xinyu X Huang Lixiang L Wang Yukun Y Zhu Xinglin X Li Lei L Li Guoxin G Sun Wenhong W

RSC advances 20200904 54

Efficient CH3NH3PbI3 photodetectors (PDs) with an extremely high gain of the maximum external quantum efficiency (EQE) of 140 000% within the ultraviolet region to the near infrared region (NIR) and an extremely high responsivity (R) under a low bias of -5 V were successfully fabricated. The fabricated devices manifested outstanding environmental stability with only 10% degradation of EQE after being exposed to air for 24 h. These obtained results indicate ...[more]

PMID: 35516470

Similar Datasets

Perovskite spin light-emitting diodes with simultaneously high electroluminescence dissymmetry and high external quantum efficiency.

Project description:Realizing high electroluminescence dissymmetric factor and high external quantum efficiency at the same time is challenging in light-emitting diodes with direct circularly polarized emission. Here, we show that high electroluminescence dissymmetric factor and high external quantum efficiency can be simultaneously achieved in light-emitting diodes based on chiral perovskite quantum dots. Specifically, chiral perovskite quantum dots with chiral-induced spin selectivity can concurrently serve as localized radiative recombination centers of spin-polarized carriers for circularly polarized emission, thereby suppressing the relaxation of spins, Meanwhile, improving the chiral ligand exchange efficiency is found to synergistically promote their spin selectivity and optoelectronic properties so that chiroptoelectronic performance of resulting devices can be facilitated. Our device simultaneously exhibits high electroluminescence dissymmetric factor (R: 0.285 and S: 0.251) and high external quantum efficiency (R: 16.8% and S: 16%), demonstrating their potential in constructing high-performance chiral light sources.

| S-EPMC11880525 | biostudies-literature

Enhancing sub-bandgap external quantum efficiency by photomultiplication for narrowband organic near-infrared photodetectors.

Project description:Detection of electromagnetic signals for applications such as health, product quality monitoring or astronomy requires highly responsive and wavelength selective devices. Photomultiplication-type organic photodetectors have been shown to achieve high quantum efficiencies mainly in the visible range. Much less research has been focused on realizing near-infrared narrowband devices. Here, we demonstrate fully vacuum-processed narrow- and broadband photomultiplication-type organic photodetectors. Devices are based on enhanced hole injection leading to a maximum external quantum efficiency of almost 2000% at -10 V for the broadband device. The photomultiplicative effect is also observed in the charge-transfer state absorption region. By making use of an optical cavity device architecture, we enhance the charge-transfer response and demonstrate a wavelength tunable narrowband photomultiplication-type organic photodetector with external quantum efficiencies superior to those of pin-devices. The presented concept can further improve the performance of photodetectors based on the absorption of charge-transfer states, which were so far limited by the low external quantum efficiency provided by these devices.

| S-EPMC8282846 | biostudies-literature

Multiple-engineering controlled growth of tunable-bandgap perovskite nanowires for high performance photodetectors.

Project description:Controllable growth of perovskite nanowires is very important for various applications in optical and electrical devices. Although significant progress has been achieved in the solution method, a deep understanding of the mechanics of growing perovskite nanowires is still lacking. Herein, we developed an electrochemical method for growing the perovskite nanowires and studied the growth processes systematically. The initial nucleation and crystal growth could be controlled by simply varying the additive solvents, thus leading to two stable size ratio distributions of the perovskite nanowires. Further, with compositional engineering, the bandgap of the perovskites could be tuned from 1.59 eV to 3.04 eV. All the as-grown perovskite nanowires displayed a unique structure with high crystallization quality, contributing to a very high responsivity of 2.1 A W-1 and a large on/off ratio of 5 × 103 for the photodetectors based on the CH3NH3PbBr3 nanowires. All of these findings demonstrate that the optimized solution method offers a new approach to synthesize perovskite nanowires for applications in photoelectric devices.

| S-EPMC9065273 | biostudies-literature

Realizing High Brightness Quasi-2D Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-Off via Multifunctional Interface Engineering.

Project description:Quasi-2D perovskites have recently flourished in the field of luminescence due to the quantum-confinement effect and the efficient energy transfer between different n phases resulting in exceptional optical properties. However, owing to the lower conductivity and poor charge injection, quasi-2D perovskite light-emitting diodes (PeLEDs) typically suffer from low brightness and high-efficiency roll-off at high current densities compared to 3D perovskite-based PeLEDs, which is undoubtedly one of the most critical issues in this field. In this work, quasi-2D PeLEDs with high brightness, reduced trap density, and low-efficiency roll-off are successfully demonstrated by introducing a thin layer of conductive phosphine oxide at the perovskite/electron transport layer interface. The results surprisingly show that this additional layer does not improve the energy transfer between multiple quasi-2D phases in the perovskite film, but purely improves the electronic properties of the perovskite interface. On the one hand, it passivates the surface defects of the perovskite film; on the other hand, it promotes electron injection and prevents hole leakage across this interface. As a result, the modified quasi-2D pure Cs-based device shows a maximum brightness of > 70,000 cd m-2 (twice that of the control device), a maximum external quantum efficiency (EQE) of > 10% and a much lower efficiency roll-off at high bias voltages.

| S-EPMC10502845 | biostudies-literature

High External Photoluminescence Quantum Yield in Tin Halide Perovskite Thin Films.

Project description:We show that pristine thin films made of tin halide perovskite have external photoluminescence quantum yield comparable to that of lead halide perovskite, i.e., the material in use to prepare state-of-the-art perovskite solar cells.

| S-EPMC7887870 | biostudies-literature

High-performance nanotube-enhanced perovskite photodetectors.

Project description:Organic-inorganic perovskites have already shown a tremendous potential for low-cost light-harvesting devices. Yet, the relatively low carrier mobilities in bulk perovskites still prevent large-area devices with performances competing with state-of-the-art technologies. Here, we tackle this fundamental challenge by incorporating single-wall carbon nanotubes within a perovskite matrix by means of a simple two-step method in ambient air. Using this nano-engineered hybrid film, we demonstrate large-area photodetectors with responsivities up-to 13.8 A.W-1 and a broad spectral response from 300 to 800 nm, indicating that photocurrent generation arises from the charge transfer from the perovskite matrix to the embedded nanotube network. As the nanotubes facilitate the carrier extraction, these photodetectors also show a fast response time of 10 ms. This is significantly faster than most of previous reports on perovskite-based photodetectors, including devices with much smaller photosensitive areas. This approach is also well-suited for large-scale production of other perovskite-based light-harvesting devices.

| S-EPMC5371979 | biostudies-literature

Improved Efficiency of All-Inorganic Quantum-Dot Light-Emitting Diodes via Interface Engineering.

Project description:As the charge transport layer of quantum dot (QD) light-emitting diodes (QLEDs), metal oxides are expected to be more stable compared with organic materials. However, the efficiency of metal oxide-based all-inorganic QLEDs is still far behind that of organic-inorganic hybrid ones. The main reason is the strong interaction between metal oxide and QDs leading to the emission quenching of QDs. Here, we demonstrated nickel oxide (NiOx)-based all-inorganic QLEDs with a maximum current efficiency of 20.4 cd A-1 and external quantum efficiency (EQE) of 5.5%, which is among the most efficient all-inorganic QLEDs. The high efficiency is mainly attributed to the aluminum oxide (Al2O3) deposited at the NiOx/QDs interface to suppress the strong quenching effect of NiOx on the QD emission, together with the molybdenum oxide (MoOx) that reduced the leakage current and facilitated hole injection, more than 300% enhancement was achieved compared with the pristine NiOx-based QLEDs. Our study confirmed the effect of decorating the NiOx/QDs interface on the performance enhancement of the all-inorganic QLEDs.

| S-EPMC7191064 | biostudies-literature

Synergistic-potential engineering enables high-efficiency graphene photodetectors for near- to mid-infrared light.

Project description:High quantum efficiency and wide-band detection capability are the major thrusts of infrared sensing technology. However, bulk materials with high efficiency have consistently encountered challenges in integration and operational complexity. Meanwhile, two-dimensional (2D) semimetal materials with unique zero-bandgap structures are constrained by the bottleneck of intrinsic quantum efficiency. Here, we report a near-mid infrared ultra-miniaturized graphene photodetector with configurable 2D potential well. The 2D potential well constructed by dielectric structures can spatially (laterally and vertically) produce a strong trapping force on the photogenerated carriers in graphene and inhibit their recombination, thereby improving the external quantum efficiency (EQE) and photogain of the device with wavelength-immunity, which enable a high responsivity of 0.2 A/W-38 A/W across a broad infrared detection band from 1.55 to 11 µm. Thereafter, a room-temperature detectivity approaching 1 × 109 cm Hz1/2 W-1 is obtained under blackbody radiation. Furthermore, a synergistic effect of electric and light field in the 2D potential well enables high-efficiency polarization-sensitive detection at tunable wavelengths. Our strategy opens up alternative possibilities for easy fabrication, high-performance and multifunctional infrared photodetectors.

| S-EPMC10858052 | biostudies-literature

High efficiency perovskite quantum dot solar cells with charge separating heterostructure.

Project description:Metal halide perovskite semiconductors possess outstanding characteristics for optoelectronic applications including but not limited to photovoltaics. Low-dimensional and nanostructured motifs impart added functionality which can be exploited further. Moreover, wider cation composition tunability and tunable surface ligand properties of colloidal quantum dot (QD) perovskites now enable unprecedented device architectures which differ from thin-film perovskites fabricated from solvated molecular precursors. Here, using layer-by-layer deposition of perovskite QDs, we demonstrate solar cells with abrupt compositional changes throughout the perovskite film. We utilize this ability to abruptly control composition to create an internal heterojunction that facilitates charge separation at the internal interface leading to improved photocarrier harvesting. We show how the photovoltaic performance depends upon the heterojunction position, as well as the composition of each component, and we describe an architecture that greatly improves the performance of perovskite QD photovoltaics.

| S-EPMC6599010 | biostudies-literature

High-performance graphene-quantum-dot photodetectors.

Project description:Graphene quantum dots (GQDs) have received much attention due to their novel phenomena of charge transport and light absorption/emission. The optical transitions are known to be available up to ~6 eV in GQDs, especially useful for ultraviolet (UV) photodetectors (PDs). Thus, the demonstration of photodetection gain with GQDs would be the basis for a plenty of applications not only as a single-function device in detecting optical signals but also a key component in the optoelectronic integrated circuits. Here, we firstly report high-efficient photocurrent (PC) behaviors of PDs consisting of multiple-layer GQDs sandwiched between graphene sheets. High detectivity (>10(11) cm Hz(1/2)/W) and responsivity (0.2 ~ 0.5 A/W) are achieved in the broad spectral range from UV to near infrared. The observed unique PD characteristics prove to be dominated by the tunneling of charge carriers through the energy states in GQDs, based on bias-dependent variations of the band profiles, resulting in novel dark current and PC behaviors.

| S-EPMC4083259 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data