An eco-friendly water-assisted polyol method to enhance the aspect ratio of silver nanowires.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhao W
PROVIDER: S-EPMC9059714 | biostudies-literature | 2019 Jan
REPOSITORIES: biostudies-literature
Publications
An eco-friendly water-assisted polyol method to enhance the aspect ratio of silver nanowires.
Zhao Wei W Wang Sha-Sha SS Cao Hong-Tao HT Xie Ling-Hai LH Hong Chao-Shen CS Jin Ling-Zhi LZ Yu Meng-Na MN Zhang He H Zhang Zhi-Yun ZY Huang Li-Hua LH Huang Wei W
RSC advances 20190114 4
With water as an eco-friendly heterogeneous nucleation accelerator, silver nanowires (Ag NWs) have been successfully prepared with a high aspect ratio (>1600). The Ag NW-based film exhibits a low sheet resistance of 8.1 Ω sq<sup>-1</sup> with a transparency of 81.9% at 550 nm, showing the potential application of electrode materials in polymer solar cells. ...[more]
Similar Datasets
Project description:Screen printing is a promising route towards high throughput printed electronics. Currently, the preparation of nanomaterial based conductive inks involves complex formulations with often toxic surfactants in the ink's composition, making them unsuitable as an eco-friendly printing technology. This work reports the development of a silver nanowire (AgNW) ink with a relatively low conductive particle loading of 7 wt%. The AgNW ink involves simple formulation and comprises a biodegradable binder and a green solvent with no toxic surfactants in the ink formulation, making it an eco-friendly printing process. The formulated ink is suitable for printing on a diverse range of substrates such as polydimethylsiloxane (PDMS), polyethylene terephthalate (PET), polyimide (PI) tape, glass, and textiles. By tailoring the rheological behaviour of the ink and developing a one-step post-printing process, a minimum feature size of 50 μm and conductivity as high as 6.70 × 106 S m-1 was achieved. Use of a lower annealing temperature of 150 °C makes the process suitable for plastic substrates. A flexible textile heater and a wearable hydration sensor were fabricated using the reported AgNW ink to demonstrate its potential for wearable electronic applications.
| S-EPMC9930198 | biostudies-literature
Project description:High enhancement of fluorescence emission, improved fluorophore photostability, and significant reduction of fluorescence lifetimes have been obtained from high aspect ratio (>100) silver (Ag) nanowires. These quantities are found to depend on the surface loading of Ag nanowires on glass slides, where the enhancement of fluorescence emission increases with the density of nanowires. The surface loading dependence was attributed to the creation of intense electric fields around the network of Ag nanowires and to the coupling of fluorophore excited states that takes place efficiently at a distance of 10 nm from the surface of nanowires, which was confirmed by theoretical calculations. The enhancement of fluorescence emission of fluorescein isothiocyanate (FITC) was assessed by fluorescence spectroscopy and fluorescence-lifetime imaging microscopy (FLIM) to demonstrate the potential of high aspect ratio Ag nanowires. Fluorescence enhancement factors exceeding 14 were observed on Ag nanowires with high loading by FLIM. The photostability of FITC was the highest on nanowires with medium loading under continuous laser excitation for 10 min because of the significant reduction in the fluorescence lifetime of FITC on these surfaces. These results clearly demonstrate the potential of Ag nanowires in metal-enhanced fluorescence-based applications of biosensing on planar surfaces and cellular imaging.
| S-EPMC4291037 | biostudies-literature
Project description:Silver nanowires (Ag NWs) as transparent conducting electrodes are widely used in many applications such as organic light-emitting diodes (OLEDs), polymer light-emitting diodes, touch screens, solar cells, and transparent heaters. In this work, using a large-scale synthesis, the synthesized Ag NWs had a high aspect ratio of 2820. The Ag NWs could be applied as a top transparent electrode in a device by simple drop-casting without any post-processing steps. The fabricated device comprised 4,4'-bis(carbazol-9-yl)biphenyl/MoO3 organic/inorganic layers which are parts of the inverted structure OLEDs or solar cells. The photodiode characteristics at the UV range were observed in the device. The ability of Ag NWs to replace opaque metals as top electrodes in a device has been demonstrated.
| S-EPMC6705234 | biostudies-literature
Project description:Nanotechnology is an exciting area with great potential for use in biotechnology due to the far-reaching effects of nanoscale materials and their size-dependent characteristics. Silver and other metal nanoparticles have attracted a lot of attention lately because of the exceptional optical, electrical, and antimicrobial characteristics they possess. Silver nanoparticles (AgNPs) stand out due to their cost-effectiveness and abundant presence in the earth's crust, making them a compelling subject for further exploration. The vital efficacy of silver nanoparticles in addressing environmental concerns is emphasized in this thorough overview that dives into their significance in environmental remediation. Leveraging the distinctive properties of AgNPs, such as their antibacterial and catalytic characteristics, innovative solutions for efficient treatment of pollutants are being developed. The review critically examines the transformative potential of silver nanoparticles, exploring their various applications and promising achievements in enhancing environmental remediation techniques. As environmental defenders, this study advocates for intensified investigation and application of silver nanoparticles. Furthermore, this review aims to assist future investigators in developing more cost-effective and efficient innovations involving AgNPs carrying nanoprobes. These nanoprobes have the potential to detect numerous groups of contaminants simultaneously, with a low limit of detection (LOD) and reliable reproducibility. The goal is to utilize these innovations for environmental remediation purposes.
| S-EPMC11456292 | biostudies-literature
Project description:Traditional screen printing is an easy approach commonly used for conductive pattern fabrication of electronics but lacks high resolution. Photolithography offers better resolution but is complex. Photosensitive silver pastes (PSP) combine the benefits of both but suffer from undercut issues, causing uneven etching, decreased interfacial adhesion, and thus poor resolutions. In this study, we explore the use of molecular precursors (i.e., silver oxalate) to replace metallic silver particles and enhance the depth of light penetration. Our findings demonstrate a successful solution to the undercut issue, achieving an undercut index of 1.0, indicating an undercut-free scenario and enabling higher resolutions in line and pattern formation. Additionally, our research confirms the feasibility of multilayer stacking of photosensitive pastes, achieving unprecedented aspect ratios in line patterns. By replacing 25% of micrometer silver powder with silver oxalate (PSP-25), we achieved optimal line widths as fine as 10 μm. The three-layer stack of PSP-25 reached a substantial aspect ratio with a height of 29.4 μm and an optimal fringe pattern resolution of 10 μm line width with a 15 μm aisle width. Utilization of silver oxalate was observed to slightly expand the line width, likely due to light scattering by the fine silver nanoparticles (∼40 nm) formed during the photodecomposition of silver oxalate.
| S-EPMC11412270 | biostudies-literature
Project description:The fabrication of silver nanoparticles (Ag NPs) with different sizes by microwave (MW)-assisted synthesis is presented. The fast heating of the MW technique, combined with the possibility to thermally quench the reactions, enabled us to capture snapshots of nucleation and growth processes difficult to accomplish in other techniques. The Ag NPs were synthesized using poly(vinylpyrrolidone) (PVP) through a polyol approach. The effects of the reaction time, the reaction temperatures, and the silver precursor concentration were investigated. The influence of agitation, the PVP concentration, and the initial conditions of the silver precursor was also studied. It is found that at very short reaction times and at low temperatures, polyhedral plates are formed with sizes ca. 300 nm and large polydispersity. However, by increasing the time or the temperature, a size and shape refinement is observed resulting in 10 nm spherical NPs with low polydispersity. Mechanistic insights are provided based on the observations extracted from transmission electron microscopy (TEM) and ultraviolet-visible spectroscopy (UV-vis). A formation mechanism starting from kinetically favored silver polyhedral plates to thermodynamically favored spherical nanoparticles is proposed. Understanding these effects allowed us to control the particle size and the tuning of Ag NPs on-demand. Moreover, the reproducibility and scalability of the process and the long-term stability of the NPs in aqueous solutions are demonstrated. Finally, we provide a recommendation regarding the use of fresh PVP as a capping and stabilizing agent.
| S-EPMC7097931 | biostudies-literature
Project description:Limited approaches exist for imaging and recording spectra of individual nanostructures in the midinfrared region. Here we use infrared photothermal heterodyne imaging (IR-PHI) to interrogate single, high aspect ratio Au nanowires (NWs). Spectra recorded between 2,800 and 4,000 cm-1 for 2.5-3.9-μm-long NWs reveal a series of resonances due to the Fabry-Pérot modes of the NWs. Crucially, IR-PHI images show structure that reflects the spatial distribution of the NW absorption, and allow the resonances to be assigned to the m = 3 and m = 4 Fabry-Pérot modes. This far-field optical measurement has been used to image the mode structure of plasmon resonances in metal nanostructures, and is made possible by the superresolution capabilities of IR-PHI. The linewidths in the NW spectra range from 35 to 75 meV and, in several cases, are significantly below the limiting values predicted by the bulk Au Drude damping parameter. These linewidths imply long dephasing times, and are attributed to reduction in both radiation damping and resistive heating effects in the NWs. Compared to previous imaging studies of NW Fabry-Pérot modes using electron microscopy or near-field optical scanning techniques, IR-PHI experiments are performed under ambient conditions, enabling detailed studies of how the environment affects mid-IR plasmons.
| S-EPMC7007563 | biostudies-literature
Project description:The demand for lead-free alternatives to lead-halide perovskite (LHP) solar cells has prompted extensive research efforts to explore alternative materials. Silver bismuth iodide (Ag-Bi-I) absorbers have an appropriate band gap between 1.8 and 1.9 eV for solar cells and exhibit a high absorption coefficient and excellent stability under ambient conditions. However, achieving sufficient power conversion efficiency (PCE) at the lab scale. The maximum PCE reported to date for Ag-Bi-I (SBI) materials is 5.56%, a much lower PCE value than those obtained for LHP based solar cells. Various approaches have been employed to improve the properties of SBI-based solar cells, including solution engineering, additive incorporation, and cation exchange. However, trap-assisted recombination and intrinsic limitations may be the underlying factors impacting their efficiency. With an overview of previous research efforts on SBI materials, we highlight different approaches for PCE enhancement and discuss the current state of basic research on material preparation and analysis. Furthermore, this study offers insights and prospects for SBI as a material for solar energy applications.
| S-EPMC11912501 | biostudies-literature
Project description:While numerous types of chemical cosmetic cleansers have been presented, those with sensitive skin may still experience some irritation while using them. Moreover, the environmental issue of chemical agents has been documented repeatedly. To address these, we suggest the potential application of a micro-sized bubble-laden water jet to cleanse the cosmetics without (or less) using chemical detergents. We devised a venturi-type nozzle with a mesh and air holes capable of generating massive fine bubbles. By testing with the foundation and lip tint (known to be highly adhesive) coated on the synthetic leather and artificial skin surfaces, we measured that the cleansing performance of the bubbly jet is much better (even without the chemical agent) than the single-phase liquid jet. As a mechanism for enhanced removal, it is understood that the greater kinetic energy of the jet due to the acceleration of the effective liquid-air mixture flow and the direct bubble-cosmetic collisions play essential roles. We believe that the present results will spur the development of environment-friendly cleaning methods.
| S-EPMC11001607 | biostudies-literature
Project description:AbstractThis study was aimed at producing the eco-friendly, safe, and inexpensive silver (Ag) nanoparticles (NPs) and assessing its antimicrobial activity. Fungal pathogens isolated from diseased leaves and fruits of brinjal and bacterial pathogen obtained from a culture collection were used in this study. Green synthesis of AgNPs was performed and optimized using Azadirachta indica leaf extract. The newly synthesized AgNPs (λmax = 437 nm) showed isotropism in size (crystal size/diameter: 21/29 ± 5 nm) and morphology under transmission and scanning electron microscopy and energy dispersive X-ray analysis. The fourier transform infrared spectroscopy data suggested the role of various aliphatic/aromatic moieties and proteins in AgNPs stabilization. The AgNPs reduced the growth of Penicillium sp. maximally by 92% after 6 days. The sensitivity of test fungi towards AgNPs followed the order: Penicillium sp. (92%) > Fusarium sp. (89%) > Aspergillus sp. (69%). Exposure of Ralstonia solanacearum to AgNPs (MIC/MBC 200/400 µg ml-1) displayed damaged cellular envelopes, bulging of cells, and pit formation. The nucleic acid discharge showed a progressive increase from 8 to 34% (r2 = 0.97). The cellular metabolic activity and surface adhering ability of R. solanacearum were completely lost at 400 µgAgNPs ml-1. Results suggested that the AgNPs synthesized in this study had enough anti-pathogenic potential and could inexpensively and safely be used as a promising alternative to agrochemicals. Moreover, the findings observed in this study is likely to serve as an important indicator for the development of effective nano-control agents which in effect would help to manage some deadly phyto-pathogens capable of causing heavy losses to agricultural production systems.Graphical abstractEffective inhibition of phytopathogenic microbes by eco-friendly neem leaf extract mediated silver nanoparticles (AgNPs).
| S-EPMC6646496 | biostudies-literature