Accurate, hysteresis-free temperature sensor for health monitoring using a magnetic sensor and pristine polymer.
Ontology highlight
ABSTRACT:
SUBMITTER: Jeong W
PROVIDER: S-EPMC9061587 | biostudies-literature | 2019 Mar
REPOSITORIES: biostudies-literature
Publications
Accurate, hysteresis-free temperature sensor for health monitoring using a magnetic sensor and pristine polymer.
Jeong Wooseong W Kim Mijin M Ha Jae-Hyun JH Binti Zulkifli Nora Asyikin NA Hong Jung-Il JI Kim CheolGi C Lee Sungwon S
RSC advances 20190311 14
Herein, a novel temperature sensor is proposed employing a planar Hall resistance (PHR) magnetic sensor, a magnet sheet, and an expanding polymer. It features a tunable temperature range, high linear sensitivity, accuracy, and cycling stability through 1000 cycles, and no thermal hysteresis. This new sensor is promising as a body temperature sensor. ...[more]
Similar Datasets
Project description:Magnetic tweezers based on a solenoid with an iron alloy core are widely used to apply large forces (∼100 nN) onto micron-sized (∼5 μm) superparamagnetic particles for mechanical manipulation or microrheological measurements at the cellular and molecular level. The precision of magnetic tweezers, however, is limited by the magnetic hysteresis of the core material, especially for time-varying force protocols. Here, we eliminate magnetic hysteresis by a feedback control of the magnetic induction, which we measure with a Hall sensor mounted to the distal end of the solenoid core. We find that the generated force depends on the induction according to a power-law relationship and on the bead-tip distance according to a stretched exponential relationship. Combined, they describe with only three parameters the induction-force-distance relationship, enabling accurate force calibration and force feedback. We apply our method to measure the force dependence of the viscoelastic and plastic properties of fibroblasts using a protocol with stepwise increasing and decreasing forces. We group the measured cells in a soft and a stiff cohort and find that softer cells show an increasing stiffness but decreasing plasticity with higher forces, indicating a pronounced stress stiffening of the cytoskeleton. By contrast, stiffer cells show no stress stiffening but an increasing plasticity with higher forces. These findings indicate profound differences between soft and stiff cells regarding their protection mechanisms against external mechanical stress. In summary, our method increases the precision, simplifies the handling, and extends the applicability of magnetic tweezers.
| S-EPMC7335913 | biostudies-literature
Project description:Wearable strain sensors have been widely used for human activity monitoring. Most reported strain sensors have mainly focused on material engineering, high stretchability and large gauge factors. Few works have focused on strain sensor's robustness and reliability, including low hysteresis, good long-term stability, good electrode material stability, and low coupling effects under multi-input signals, which are the factors that limit practical strain sensor applications. To develop a high-performance strain sensor, we propose a flexible capacitive sensor structure with three-dimensional (3D) interdigital electrodes fabricated by vertically aligned carbon nanotubes. Compared with a traditional resistive strain sensor and a capacitive strain sensor with vertical sandwich electrodes, a strain sensor with horizontal parallel interdigital electrodes can benefit from low cross talk in terms of the normal force and improve substrate transparency. Additionally, embedding 3D electrodes into the substrate improves ultrahigh robustness with a low-pressure coupling effect under normal force. Moreover, compared with other reported works, the electrode variation under strain is small (less than 1.6%), which means that the perturbation of inert properties on device performance is small. Finally, the fabricated strain sensor achieves an ultralow hysteresis (0.35%), excellent pressure-insensitive performance (less than 0.8%), fast response (60 ms), good long-term stability, and good transparency. As an application example, a flexible strain sensor was successfully demonstrated as a wearable device for the precise monitoring of different types of human activities, including bending of the finger, knee, elbow, wrist, and neck with large strain signals and small strain signals generated by a mouth-opening activity. This excellent performance indicates that the flexible strain sensor is a promising candidate for human motion detection, soft robotics, and medical care.
| S-EPMC9553868 | biostudies-literature
Project description:It is highly challenging to detect the pathophysiology of the diseased kidneys and achieve precise diagnosis because there are few in vivo noninvasive imaging techniques to quantitatively assess kidney dysfunction. This longstanding challenge is normally attributed to the limited molecular contrast agents which can be addressed with renal clearable nanoprobes. In this report, we demonstrate the use of magnetic resonance imaging along with renal clearable ferric coordination polymer nanodots (Fe-CPNDs) for in vivo monitoring the kidney dysfunction effects following drug (daunomycin)-induced kidney injury. After intravenous injection of Fe-CPNDs, the change of the MR signal in the kidney can be precisely correlated with local pathological lesion which is demonstrated by renal anatomic details and biochemical examinations of urine and blood. This finding opens the door to the possibility of noninvasively assessing kidney dysfunction and local injuries.
| S-EPMC6130784 | biostudies-literature
Project description:This study demonstrates the existence of temperature-induced molecular bonding hysteresis at nanoparticle-polymer interfaces in a highly cross-linked epoxy-based polymer, modified with core-shell rubber nanoparticles. This thermally induced bond hysteresis manifests itself in a hysteresis-like change of the strength of the electrical bond polarization between epoxy molecules and surface molecules of the core-shell nanoparticles. This kind of dynamic bond behavior can be controllably switched from one bond state to the other by a sufficient temperature change. The related optical remanence is evidenced by a refractive index hysteresis independent of the temperature change using the new experimental technique of temperature-modulated optical refractometry (TMOR). From the investigation of quasi-static and dynamic thermal expansion separately, TMOR allows for the conclusion that the observed hysteresis is caused by the specific refractivity and not the dipole number density.
| S-EPMC11000236 | biostudies-literature
Project description:Although the numerous advantages of polymer optical fibers have been exploited in the fields of sensors and telecommunications, such fibers still experience a critical problem: the temperature dependency. Therefore, we explored the temperature-independent operation of a polymer fiber-optic evanescent wave sensor immersed in distilled water. We investigated variations in the surface morphology, deformation trajectory, refractive index, and weight of the fiber-sensing region with varying water temperature. We also examined the spectral transmission and transmitted light intensity of fibers subjected to a heating-cooling treatment. We observed that the light-transmission modes and sensitivity of the sensor were affected by changes in the surface morphology, diameter, and refractive index of the sensing region caused by changes in temperature. The transmitted light intensity of the sensor was maintained at a constant level after five cycles of the heating-cooling treatment, after which the fibers exhibited a smooth surface, low refractive index, and large fiber diameter. Consequently, we utilized the heating-cooling-treated fiber to realize a temperature-independent, U-shaped polymer fiber-optic evanescent wave sensor. The temperature independence was evaluated using glucose solutions in the range of 10 to 70 °C. The fabricated sensor showed significant temperature independence and high degree of consistency in measuring solutions.
| S-EPMC4481644 | biostudies-other
Project description:We report the hydrogen-sensing response on low-cost-solution-derived ZnO nanorods (NRs) on a glass substrate, integrated with aluminum as interdigitated electrodes (IDEs). The hydrothermally grown ZnO NRs on ZnO seed-layer-glass substrates are vertically aligned and highly textured along the c-axis (002 plane) with texture coefficient ∼2.3. An optimal hydrogen-sensing response of about 21.46% is observed for 150 ppm at 150 °C, which is higher than the responses at 100 and 50 °C, which are ∼12.98 and ∼10.36%, respectively. This can be attributed to the large surface area of ∼14.51 m2/g and pore volume of ∼0.013 cm3/g, associated with NRs and related defects, especially oxygen vacancies in pristine ZnO nanorods. The selective nature is investigated with different oxidizing and reducing gases like NO2, CO, H2S, and NH3, showing relatively much lower ∼4.28, 3.42, 6.43, and 3.51% responses, respectively, at 50 °C for 50 ppm gas concentration. The impedance measurements also substantiate the same as the observed surface resistance is initially more than bulk, which reduces after introducing the hydrogen gas during sensing measurements. The humidity does not show any significant change in the hydrogen response, which is ∼20.5 ± 1.5% for a large humidity range (from 10 to 65%). More interestingly, the devices are robust against sensing response, showing no significant change after 10 months or even more.
| S-EPMC9386818 | biostudies-literature
Project description:Organic field-effect transistors (OFETs) are of the core units in organic electronic circuits, and the performance of OFETs replies critically on the properties of their dielectric layers. Owing to the intrinsic flexibility and natural compatibility with other organic components, organic polymers, such as poly(vinyl alcohol) (PVA), have emerged as highly interesting dielectric materials for OFETs. However, unsatisfactory issues, such as hysteresis, high subthreshold swing, and low effective carrier mobility, still considerably limit the practical applications of the polymer-dielectric OFETs for high-speed, low-voltage flexible organic circuits. This work develops a new approach of using supercritical CO2 fluid (SCCO2) treatment on PVA dielectrics to achieve remarkably high-performance polymer-dielectric OFETs. The SCCO2 treatment is able to completely eliminate the hysteresis in the transfer characteristics of OFETs, and it can also significantly reduce the device subthreshold slope to 0.25 V/dec and enhance the saturation regime carrier mobility to 30.2 cm2 V-1 s-1, of which both the numbers are remarkable for flexible polymer-dielectric OFETs. It is further demonstrated that, coupling with an organic light-emitting diode (OLED), the SCCO2-treated OFET is able to function very well under fast switching speed, which indicates that an excellent switching behavior of polymer-dielectric OFETs can be enabled by this SCCO2 approach. Considering the broad and essential applications of OFETs, we envision that this SCCO2 technology will have a very broad spectrum of applications for organic electronics, especially for high refresh rate and low-voltage flexible display devices.
| S-EPMC7510345 | biostudies-literature
Project description:In recent times, flexible piezoresistive polymer nanocomposite-based strain sensors are in high demand in wearable devices and various new age applications. In the polymer nanocomposite-based strain sensor, the dispersion of conductive nanofiller remains challenging due to the competing requirements of homogenized dispersion of nanofillers in the polymer matrix and retaining of the inherent characteristics of nanofillers. In the present work, waterproof and flexible poly(vinylidene difluoride) (PVDF) with a polymer-functionalized hydrogen-exfoliated graphene (HEG)-based piezoresistive strain sensor is developed and demonstrated. The novelty of the work is the incorporation of polystyrene sulfonate sodium salt (PSS) polymer-functionalized HEG in a PVDF-based flexible piezoresistive strain sensor. The PSS-HEG provides stable dispersion in the hydrophobic PVDF polymer matrix without sacrificing its inherent characteristics. The electrical conductivity of the PVDF/PSS-HEG-based strain sensor is 0.3 S cm-1, which is two orders of magnitude higher than the PVDF/HEG-based strain sensor. Besides, near the percolation region, the PVDF/PSS-HEG shows a maximum gauge factor of 10, which is about two times higher than the PVDF/HEG-based flexible strain sensor and 5-fold higher than the commercially available metallic strain gauge. The enhancement in the gauge factor is due to the stable dispersion of PSS-HEG in the PVDF matrix and electron conjugation caused by the adherence of negatively charged sulfonate functional groups on the HEG. The developed waterproof flexible strain sensor is demonstrated using portable wireless interfacing device for various applications. This work shows that the waterproof flexible PVDF/PSS-HEG-based strain sensor can be a potential alternative to the commercially available metallic strain gauge.
| S-EPMC7288371 | biostudies-literature
Project description:Flexible electronic devices offer the capability to integrate and adapt with human body. These devices are mountable on surfaces with various shapes, which allow us to attach them to clothes or directly onto the body. This paper suggests a facile fabrication strategy via electrospinning to develop a stretchable, and sensitive poly (vinylidene fluoride) nanofibrous strain sensor for human motion monitoring. A complete characterization on the single PVDF nano fiber has been performed. The charge generated by PVDF electrospun strain sensor changes was employed as a parameter to control the finger motion of the robotic arm. As a proof of concept, we developed a smart glove with five sensors integrated into it to detect the fingers motion and transfer it to a robotic hand. Our results shows that the proposed strain sensors are able to detect tiny motion of fingers and successfully run the robotic hand.
| S-EPMC5855502 | biostudies-literature
Project description:The number of people diagnosed with advanced stages of kidney disease have been rising every year. Early detection and constant monitoring are the only minimally invasive means to prevent severe kidney damage or kidney failure. We propose a cost-effective machine learning-based testing system that can facilitate inexpensive yet accurate kidney health checks. Our proposed framework, which was developed into an iPhone application, uses a camera-based bio-sensor and state-of-the-art classical machine learning and deep learning techniques for predicting the concentration of creatinine in the sample, based on colorimetric change in the test strip. The predicted creatinine concentration is then used to classify the severity of the kidney disease as healthy, intermediate, or critical. In this article, we focus on the effectiveness of machine learning models to translate the colorimetric reaction to kidney health prediction. In this setting, we thoroughly evaluated the effectiveness of our novel proposed models against state-of-the-art classical machine learning and deep learning approaches. Additionally, we executed a number of ablation studies to measure the performance of our model when trained using different meta-parameter choices. Our evaluation results indicate that our selective partitioned regression (SPR) model, using histogram of colors-based features and a histogram gradient boosted trees underlying estimator, exhibits much better overall prediction performance compared to state-of-the-art methods. Our initial study indicates that SPR can be an effective tool for detecting the severity of kidney disease using inexpensive lateral flow assay test strips and a smart phone-based application. Additional work is needed to verify the performance of the model in various settings.
| S-EPMC10995075 | biostudies-literature