Fluorinated polymer surfactants bearing an alternating peptide skeleton prepared by three-component polycondensation.
Ontology highlight
ABSTRACT:
SUBMITTER: Koyama Y
PROVIDER: S-EPMC9078376 | biostudies-literature | 2018 Feb
REPOSITORIES: biostudies-literature
Publications
Fluorinated polymer surfactants bearing an alternating peptide skeleton prepared by three-component polycondensation.
Koyama Y Y Ihsan A B AB Taira T T Imura T T
RSC advances 20180216 14
A new species of fluorinated polymer surfactant was developed by three component polycondensation analogous to Ugi four-component condensation. The surfactant exhibited unique surface properties, which made cellulose-based materials hydrophobic and decreased the surface tension of CHCl<sub>3</sub>. It turned out that the polymer forms micelles in CHCl<sub>3</sub>. ...[more]
Similar Datasets
Project description:Supramolecular copolymers are an emerging class of materials, which bring together different properties and functionalities of multiple components via noncovalent interactions. While it is widely acknowledged that the repeating unit sequence plays an essential role on the performance of these materials, mastering and tuning the supramolecular copolymer sequence is still an open challenge. To date, only statistical supramolecular copolymers have been reported using cyclic peptide-polymer conjugates as building blocks. To enrich the diversity of tubular supramolecular copolymers, we report here a strategy of controlling their sequences by introducing an extra complementary noncovalent interaction. Hence, two conjugates bearing one electron donor and one electron acceptor, respectively, are designed. The two conjugates can individually assemble into tubular supramolecular homopolymers driven by the multiple hydrogen bonding interactions between cyclic peptides. However, the complementary charge transfer interaction between the electron donor and acceptor makes each conjugate more favorable for complexing with its counterpart, resulting in an alternating sequence of the supramolecular copolymer. Following the same principle, more functional supramolecular alternating copolymers are expected to be designed and constructed via other complementary noncovalent interactions (electrostatic interactions, metal coordination interactions, and host-guest interactions, etc.).
| S-EPMC8261775 | biostudies-literature
Project description:Animal-derived lung surfactants annually save 40 000 infants with neonatal respiratory distress syndrome (NRDS) in the United States. Lung surfactants have further potential for treating about 190 000 adult patients with acute respiratory distress syndrome (ARDS) each year. To this end, the properties of current therapeutics need to be modified. Although the limitations of current therapeutics have been recognized since the 1990s, there has been little improvement. To address this gap, our laboratory has been exploring a radically different approach in which, instead of lipids, proteins, or peptides, synthetic polymers are used as the active ingredient. This endeavor has led to an identification of a promising polymer-based lung surfactant candidate, poly(styrene-b-ethylene glycol) (PS-PEG) polymer nanomicelles. PS-PEG micelles produce extremely low surface tension under high compression because PS-PEG micelles have a strong affinity to the air-water interface. NMR measurements support that PS-PEG micelles are less hydrated than ordinary polymer micelles. Studies using mouse models of acid aspiration confirm that PS-PEG lung surfactant is safe and efficacious.
| S-EPMC6322699 | biostudies-literature
Project description:The development of techniques capable of using membrane proteins in a surfactant-free aqueous buffer is an attractive research area, and it should be elucidated for various membrane protein studies. To this end, we examined a method using new solubilization surfactants that do not detach from membrane protein surfaces once bound. The designed solubilization surfactants, DKDKC12K-PAn (n = 5, 7, and 18), consist of two parts: one is the lipopeptide-based solubilization surfactant part, DKDKC12K, fand the other is the covalently connected linear polyacrylamide (PA) chain with different Mw values of 5, 7, or 18 kDa. Intermolecular interactions between the PA chains in DKDKC12K-PAn concentrated on the surfaces of membrane proteins via amphiphilic binding of the DKDKC12K part to the integral membrane domain was observed. Therefore, DKDKC12K-PAn (n = 5, 7, and 18) could maintain a bound state even after removal of the unbound by ultrafiltration or gel-filtration chromatography. We used photosystem I (PSI) from Thermosynecoccus vulcanus as a representative to assess the impacts of new surfactants on the solubilized membrane protein structure and functions. Based on the maintenance of unique photophysical properties of PSI, we evaluated the ability of DKDKC12K-PAn (n = 5, 7, and 18) as a new solubilization surfactant.
| S-EPMC7913505 | biostudies-literature
Project description:1,n-Dual Π systems including 1,4-diene derivatives have been widely used as the elegant radical receptors to promote cascade radical additions to give the highly functionalized polycyclic scaffolds. However, the tedious and complicated preparation of the former deters broad utilization and compromises the practical value. Herein, a straightforward preparation of 1,4-diene derivatives was developed from the easily accessible alkynes and γ,δ-unsaturated carboxylic acids via electrochemical oxidation cyclization and Hofmann elimination. This transformation features with good to excellent yields, functional group compatibility, and selectivity without any Zaitsev elimination product detected.
| S-EPMC11889677 | biostudies-literature
Project description:The chemical synthesis of insulin is an enduring challenge due to the hydrophobic peptide chains and construction of the correct intermolecular disulfide pattern. We report a new approach to the chemical synthesis of insulin using a short, traceless, prosthetic C-peptide that facilitates the formation of the correct disulfide pattern during folding and its removal by basic treatment. The linear precursor is assembled by an ester forming α-ketoacid-hydroxylamine (KAHA) ligation that provides access to the linear insulin precursors in good yield from two readily prepared segments. This convergent and flexible route provides access to various human, mouse, and guinea pig insulins containing a single homoserine mutation that shows no detrimental effect on the biological activities.
| S-EPMC6243641 | biostudies-literature
Project description:Reagent consumption is an ongoing sustainability challenge for the mineral processing industry. There is a need to recover, regenerate, and reuse as many of the chemical inputs as possible. This study investigated the design and synthesis via reversible addition-fragmentation chain transfer (RAFT) polymerization of a novel polymer for use as a surfactant in a water-in-oil (w/o) emulsion system for ultrafine minerals recovery. The polymers were designed to hold a thermoresponsive moiety to allow for future recovery. The performance of the novel emulsion was tested for agglomeration of ultrafine talc mineral particles. A traditional emulsion containing sorbitan monooleate as the surfactant was used as a research benchmark to compare against the novel emulsion's stability and performance in minerals recovery. The novel RAFT polymer-based emulsions formed large and stable water droplets surrounded by a halo of smaller water droplets. Over time, the smaller droplets coalesced and a more uniform size distribution of droplets was formed, keeping the emulsion stable. Rheological testing of freshly made and aged emulsions showed both traditional and novel emulsions to have a high viscosity at a low shear rate. RAFT polymer B with a hydrophilic-lipophilic block ratio of 5:10 performed adequately as a surfactant replacement to stabilize w/o emulsions. The mineral recovery using the novel emulsion was on par with the traditional emulsions. The novel RAFT emulsion containing 2.5 wt % polymer B achieved 90% minerals recovery, a similar yield to the traditional emulsions. This study demonstrates that surfactants containing stimuli-responsive moieties can be synthesized via RAFT polymerization and successfully used in mineral processing applications to recover ultrafine particles. Work is ongoing to exploit the stimuli responsiveness to recover the polymer surfactant for reuse.
| S-EPMC10620920 | biostudies-literature
Project description:Through our present study, three novel Gemini-fluorinated cationic surfactants bearing different spacers (FSG6-2, FSG6-4, and FSG6-6) were synthesized, and their structures were explained via different spectroscopic instruments such as 1H, 13C, and 19F NMR spectra. The surface activity of the as-prepared surfactants was examined. The inhibiting influence of FSG6 molecules on the X60 steel corrosion in the pickling solution (HCl) was examined by diverse methods comprising electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and X-ray photoelectron spectroscopy (XPS) experimentations, and computational calculations. The inhibition effectiveness of FSG6 surfactants followed the order of 93.37% (FSG6-2) < 96.74% (FSG6-4) < 98.37% (FSG6-6) at 2.0 × 10-4 M. The FSG6 surfactants function as mixed-type inhibitors, according to PDP investigations. The H2O molecules that adsorbed on the steel interface were substituted with surfactant molecules, and the surfactant's inhibitory activity is likely caused by the improvement in an adsorptive layer on the steel substrate, as specified by the EIS results. The Langmuir isotherm describes the absorption of FSG6 molecules on the metal surface. The XPS investigations validate the steel interface's extremely protective nature. The mechanism of interaction between FSG6 molecules with an X60-steel employing the DFT calculations and MC simulations methods was also examined and discussed.
| S-EPMC10383753 | biostudies-literature
Project description:The symmetrically stable craniofacial bony structure supports the complex functions and delicate contour of the face. Congenital craniofacial deformities are often accompanied by bony defects and have been repetitively correlated with compromised dento-maxillary stability, but neither the extent nor the pattern of cleft-related maxillary instability has been explored in detail. Furthermore, it is largely unknown if the bony defect and related instability are correlated with secondary maxillary deformity common among patients with orofacial clefts. With the aid of finite element modeling, we studied the detailed relationship between cleft-related bony defect and maxillary stability under occlusal loading. Craniofacial models were generated based on cone-beam computed tomography data and loaded with mimicked bite forces along the axial axis of each tooth. Our data showed that all cleft models exhibited more asymmetrical deformations under mastication compared with the normal. Models with palatal cleft demonstrated greater asymmetry, greater dental arch contraction, and less maxillary protrusion compared to models with alveolar cleft only. For unilateral cleft models, alveolus on non-cleft side tended to be more protruded and lifted than the cleft side. For bilateral cleft models, the most prominent feature was the seriously contracted alveolar arch and curved and pitched premaxillae. These findings indicated cleft type-specific pattern of maxillary instability, which were largely in accordance with dentoalveolar morphological features among patients. Collectively, our study elucidated the detailed relationship between cleft bony defect and the pattern of maxillary instability, and suggested a prototype for studying the abnormal maxillary and dental arch growth among patients with craniofacial deformities.
| S-EPMC6414651 | biostudies-literature
Project description:Alzheimer's disease (AD) is the most common form of dementia affecting the elderly population worldwide. Despite enormous efforts and considerable advancement in research, no therapeutic agents have come to light to date. However, many peptide-based and small molecule inhibitors interact efficiently with the amyloid-β (Aβ) peptide and alter its aggregation pathway. On the other hand, stapled peptides have been developed mainly to stabilize α-helix conformations and study protein-protein interactions. β-Sheet stabilization or destabilization by stapled peptides has not been explored enough. Herein, we describe the generation of a library of "tail-to-side chain" stapled peptides via lactamization and their application for the first time as modulators of Aβ1-40 self-association and fibrillogenesis. They also disrupt the preformed fibrillar aggregates into nontoxic species. Their stability in the presence of proteolytic enzymes is increased due to stapling. Therefore, the stapled peptides thus formed can be useful as potent amyloid aggregation inhibitors and pave a therapeutic pathway for combating amyloid-related diseases. Also, they may help in gaining insight into the process of aggregation.
| S-EPMC8152599 | biostudies-literature
Project description:Hemifluorinated and fluorinated surfactants are lipophobic and, as such, non-detergent. Although they do not solubilize biological membranes, they can, after conventional solubilization, substitute for detergents to keep membrane proteins soluble, which generally improves their stability [Breyton, Chabaud, Chaudier, Pucci and Popot (2004) FEBS Lett. 564, 312-318]. In the present study, we show that (hemi)fluorinated surfactants can be used for in vitro synthesis of membrane proteins: they do not interfere with protein synthesis, and they provide a suitable environment for MscL, a pentameric mechanosensitive channel, to fold and oligomerize to its native functional state. Following synthesis, both types of surfactants can be used to deliver MscL directly to pre-formed lipid vesicles. The electrophysiological activity of MscL synthesized in vitro in the presence of either hemi- or per-fluorinated surfactant is similar to that of the protein expressed in vivo.
| S-EPMC1828882 | biostudies-other