Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Surface nanobubbles on the carbonate mineral dolomite.

ABSTRACT: Surface nanobubbles are of wide interest to a number of research fields, ranging from mineral processing to metamaterials. Their formation on hydrophobic surfaces has long been confirmed but the factors controlling their size and location are less well understood. In this work we investigate, using non-contact atomic force microscopy, the properties of surface nanobubbles on the mineral dolomite under three aqueous solutions; water, depressant and collector. Nanobubbles were observed under all three conditions, but with the highest density observed under collector conditions. Analysis of the critical angle of the bubbles suggests that the collector does not affect the surface tension of the bubbles, but instead does affect their pinning, consistent with the observed increased density.

SUBMITTER: Owens CL

PROVIDER: S-EPMC9087822 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Surface nanobubbles on the carbonate mineral dolomite.

Owens Camilla L CL Schach Edgar E Rudolph Martin M Nash Geoffrey R GR

RSC advances 20181016 62

Surface nanobubbles are of wide interest to a number of research fields, ranging from mineral processing to metamaterials. Their formation on hydrophobic surfaces has long been confirmed but the factors controlling their size and location are less well understood. In this work we investigate, using non-contact atomic force microscopy, the properties of surface nanobubbles on the mineral dolomite under three aqueous solutions; water, depressant and collector. Nanobubbles were observed under all t ...[more]

PMID: 35547923

Similar Datasets

Structural Behavior of Minrecordite Carbonate Mineral upon Compression: Effect of Mg → Zn Chemical Substitution in Dolomite-Type Compounds.

Project description:We report the structural behavior and compressibility of minrecordite, a naturally occurring Zn-rich dolomite mineral, determined using diamond-anvil cell synchrotron X-ray diffraction. Our data show that this rhombohedral CaZn0.52Mg0.48(CO3)2 carbonate exhibits a highly anisotropic behavior, the c axis being 3.3 times more compressible than the a axis. The axial compressibilities and the equation of state are governed by the compression of the [CaO6] and [ZnO6] octahedra, which are the cations in larger proportion in each layer. We observe the existence of a dense polymorph above 13.4(3) GPa using Ne as a pressure-transmitting medium, but the onset pressure of the phase transition decreases with the appearance of deviatoric stresses in nonhydrostatic conditions. Our results suggest that the phase transition observed in minrecordite is strain-induced and that the high-pressure polymorph is intimately related to the CaCO3-II-type structure. A comparison with other dolomite minerals indicates that the transition pressure decreases when the ratio Zn/Mg in the crystal lattice of pure dolomite is larger than 1. Density functional theory (DFT) calculations predict that a distorted CaCO3-II-type structure is energetically more stable than dolomite-type CaZn(CO3)2 above 10 GPa. However, according to our calculations, the most stable structure above this pressure is a dolomite-V-type phase, a polymorph not observed experimentally.

| S-EPMC10034829 | biostudies-literature

Surface-Templated Nanobubbles Protect Proteins from Surface-Mediated Denaturation.

Project description:In this Letter, we report that surface-bound nanobubbles reduce protein denaturation on methylated glass by irreversible protein shell formation. Single-molecule total internal reflection fluorescence (SM-TIRF) microscopy was combined with intramolecular Förster resonance energy transfer (FRET) to study the conformational dynamics of nitroreductase (NfsB) on nanobubble-laden methylated glass surfaces, using reflection brightfield microscopy to register nanobubble locations with NfsB adsorption. First, NfsB adsorbed irreversibly to nanobubbles with no apparent desorption after 5 h. Moreover, virtually all (96%) of the NfsB molecules that interacted with nanobubbles remained folded, whereas less than 50% of NfsB molecules remained folded in the absence of nanobubbles on unmodified silica or methylated glass surfaces. This trend was confirmed by ensemble-average fluorometer TIRF experiments. We hypothesize that nanobubbles reduce protein damage by passivating strongly denaturing topographical surface defects. Thus, nanobubble stabilization on surfaces may have important implications for antifouling surfaces and improving therapeutic protein storage.

| S-EPMC8051143 | biostudies-literature

High-pressure elastic properties of dolomite melt supporting carbonate-induced melting in deep upper mantle.

Project description:Deeply subducted carbonates likely cause low-degree melting of the upper mantle and thus play an important role in the deep carbon cycle. However, direct seismic detection of carbonate-induced partial melts in the Earth's interior is hindered by our poor knowledge on the elastic properties of carbonate melts. Here we report the first experimentally determined sound velocity and density data on dolomite melt up to 5.9 GPa and 2046 K by in-situ ultrasonic and sink-float techniques, respectively, as well as first-principles molecular dynamics simulations of dolomite melt up to 16 GPa and 3000 K. Using our new elasticity data, the calculated VP/VS ratio of the deep upper mantle (∼180-330 km) with a small amount of carbonate-rich melt provides a natural explanation for the elevated VP/VS ratio of the upper mantle from global seismic observations, supporting the pervasive presence of a low-degree carbonate-rich partial melt (∼0.05%) that is consistent with the volatile-induced or redox-regulated initial melting in the upper mantle as argued by petrologic studies. This carbonate-rich partial melt region implies a global average carbon (C) concentration of 80-140 ppm. by weight in the deep upper mantle source region, consistent with the mantle carbon content determined from geochemical studies.

| S-EPMC7414062 | biostudies-literature

Raman spectroscopy provides insight into carbonate rock fabric based on calcite and dolomite crystal orientation.

Project description:Carbonate rocks record the oldest forms of life on Earth, and their geologic reconstruction requires multiple methods to determine physical and chemical processes before conclusions of ancient biosignatures are made. Since crystal orientation within rock fabric may be used to infer geologic settings, we present here a complementary Raman method to study the orientation of calcite (CaCO3) and dolomite [CaMg (CO3)2] minerals. The relative peak intensity ratio of the carbonate lattice Eg modes T and L reveals the crystallographic orientation of calcite and dolomite with respect to the incident light polarization. Our results for calcite show that when the incident laser light propagates down the crystallographic a/b axis: (1) the L mode is always greater in intensity than the T mode (I T < I L), and (2) the spectra are most intense at 45° and least intense at 90° polarization angles measured from around the c axis. Our results for dolomite show that (1) I T > I L when the incident light propagation is down the crystallographic c axis and (2) I T < I L when the incident light propagation is down the crystallographic a/b axis. This study reveals mineral orientation variation related to deposition and paragenesis within limestone and dolostone samples. The method presented yields information related to growth and deformation during diagenetic and metamorphic alteration and may be used in research seeking to identify the fabric parameters of any calcite or dolomite containing rock. The compositional and structural data obtained from Raman mapping is useful in structural geology, materials science, and biosignature research.

| S-EPMC8216293 | biostudies-literature

The Influence of Air Nanobubbles on Controlling the Synthesis of Calcium Carbonate Crystals.

Project description:Numerous approaches have been developed to control the crystalline and morphology of calcium carbonate. In this paper, nanobubbles were studied as a novel aid for the structure transition from vaterite to calcite. The vaterite particles turned into calcite (100%) in deionized water containing nanobubbles generated by high-speed shearing after 4 h, in comparison to a mixture of vaterite (33.6%) and calcite (66.3%) by the reaction in the deionized water in the absence of nanobubbles. The nanobubbles can coagulate with calcite based on the potential energy calculated and confirmed by the extended DLVO (Derjaguin-Landau-Verwey-Overbeek) theory. According to the nanobubble bridging capillary force, nanobubbles were identified as the binder in strengthening the coagulation between calcite and vaterite and accelerated the transformation from vaterite to calcite.

| S-EPMC9655898 | biostudies-literature

Leakiness of Pinned Neighboring Surface Nanobubbles Induced by Strong Gas-Surface Interaction.

Project description:The stability of two neighboring surface nanobubbles on a chemically heterogeneous surface is studied by molecular dynamics (MD) simulations of binary mixtures consisting of Lennard-Jones (LJ) particles. A diffusion equation-based stability analysis suggests that two nanobubbles sitting next to each other remain stable, provided the contact line is pinned, and that their radii of curvature are equal. However, many experimental observations seem to suggest some long-term kind of ripening or shrinking of the surface nanobubbles. In our MD simulations we find that the growth/dissolution of the nanobubbles can occur due to the transfer of gas particles from one nanobubble to another along the solid substrate. That is, if the interaction between the gas and the solid is strong enough, the solid-liquid interface can allow for the existence of a "tunnel" which connects the liquid-gas interfaces of the two nanobubbles to destabilize the system. The crucial role of the gas-solid interaction energy is a nanoscopic element that hitherto has not been considered in any macroscopic theory of surface nanobubbles and may help to explain experimental observations of the long-term ripening.

| S-EPMC5876669 | biostudies-literature

Modified Natural Dolomite and Its Influence on the Production of Glycerol Carbonate: Effects of Structural and Basicity Properties.

Project description:A systematic study over different treatment conditions, including hydrothermal and acid-thermal, was successfully carried out to determine the most suitable conditions to enhance the textural properties and surface chemical composition of natural dolomite. The reconstruction of dolomite after various treatments enhanced the surface area by 4-5 times and diminished the pore diameter between 70% and 81% compared to the untreated parent dolomite. The Rietveld analysis of the X-ray diffraction (XRD) patterns revealed changes in the crystalline compositions after each treatment. When the treated dolomite was used as a catalyst to produce glycerol carbonate via a transesterification reaction of glycerol and dimethyl carbonate, the crystalline Ca(OH)2 concentration of the modified dolomite and the apparent glycerol carbonate formation rate (rgc) are well-correlated. The results suggest that an increase of the crystalline Ca(OH)2 concentration could be related with surface basicity at the weak and moderate strength sites that may lead to an increase in catalytic activity. The hydrothermal treated dolomite showed a selectivity of glycerol carbonate greater than 99% and rgc value 3.42 mmol/min·gcat, which was higher than that achieved on other samples. This study could aid to the proper selection of dolomite treatment for the desired crystalline composition, depending on the applications of this highly available mineral.

| S-EPMC8125416 | biostudies-literature

Surface chemistry allows for abiotic precipitation of dolomite at low temperature.

Project description:Although the mineral dolomite is abundant in ancient low-temperature sedimentary systems, it is scarce in modern systems below 50 °C. Chemical mechanism(s) enhancing its formation remain an enigma because abiotic dolomite has been challenging to synthesize at low temperature in laboratory settings. Microbial enhancement of dolomite precipitation at low temperature has been reported; however, it is still unclear exactly how microorganisms influence reaction kinetics. Here we document the abiotic synthesis of low-temperature dolomite in laboratory experiments and constrain possible mechanisms for dolomite formation. Ancient and modern seawater solution compositions, with identical pH and pCO2, were used to precipitate an ordered, stoichiometric dolomite phase at 30 °C in as few as 20 d. Mg-rich phases nucleate exclusively on carboxylated polystyrene spheres along with calcite, whereas aragonite forms in solution via homogeneous nucleation. We infer that Mg ions are complexed and dewatered by surface-bound carboxyl groups, thus decreasing the energy required for carbonation. These results indicate that natural surfaces, including organic matter and microbial biomass, possessing a high density of carboxyl groups may be a mechanism by which ordered dolomite nuclei form. Although environments rich in organic matter may be of interest, our data suggest that sharp biogeochemical interfaces that promote microbial death, as well as those with high salinity may, in part, control carboxyl-group density on organic carbon surfaces, consistent with origin of dolomites from microbial biofilms, as well as hypersaline and mixing zone environments.

| S-EPMC3767548 | biostudies-other

Threshold current density for diffusion-controlled stability of electrolytic surface nanobubbles.

Project description:Understanding the stability mechanism of surface micro/nanobubbles adhered to gas-evolving electrodes is essential for improving the efficiency of water electrolysis, which is known to be hindered by the bubble coverage on electrodes. Using molecular simulations, the diffusion-controlled evolution of single electrolytic nanobubbles on wettability-patterned nanoelectrodes is investigated. These nanoelectrodes feature hydrophobic islands as preferential nucleation sites and allow the growth of nanobubbles in the pinning mode. In these simulations, a threshold current density distinguishing stable nanobubbles from unstable nanobubbles is found. When the current density remains below the threshold value, nucleated nanobubbles grow to their equilibrium states, maintaining their nanoscopic size. However, for the current density above the threshold value, nanobubbles undergo unlimited growth and can eventually detach due to buoyancy. Increasing the pinning length of nanobubbles increases the degree of nanobubble instability. By connecting the current density with the local gas oversaturation, an extension of the stability theory for surface nanobubbles [Lohse and Zhang, Phys. Rev. E 91, 031003(R) (2015)] accurately predicts the nanobubble behavior found in molecular simulations, including equilibrium contact angles and the threshold current density. For larger systems that are not accessible to molecular simulations, continuum numerical simulations with the finite difference method combined with the immersed boundary method are performed, again demonstrating good agreement between numerics and theories.

| S-EPMC11126992 | biostudies-literature

Dynamic Surface Tension Enhances the Stability of Nanobubbles in Xylem Sap.

Project description:Air seeded nanobubbles have recently been observed within tree sap under negative pressure. They are stabilized by an as yet unidentified process, although some embolize their vessels in extreme circumstances. Current literature suggests that a varying surface tension helps bubbles survive, but few direct measurements of this quantity have been made. Here, we present calculations of dynamic surface tension for two biologically relevant lipids using molecular dynamics simulations. We find that glycolipid monolayers resist expansion proportionally to the rate of expansion. Their surface tension increases with the tension applied, in a similar way to the viscosity of a non-Newtonian fluid. In contrast, a prototypical phospholipid was equally resistant to all applied tensions, suggesting that the fate of a given nanobubble is dependent on its surface composition. By incorporating our results into a Classical Nucleation Theory (CNT) framework, we predict nanobubble stability with respect to embolism. We find that the metastable radius of glycolipid coated nanobubbles is approximately 35 nm, and that embolism is in this case unlikely when the external pressure is less negative than -1.5 MPa.

| S-EPMC8716698 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data