Author Correction: Enhanced stability in CH3NH3PbI3 hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization.
Ontology highlight
ABSTRACT:
SUBMITTER: Lopez CA
PROVIDER: S-EPMC9120503 | biostudies-literature | 2022 May
REPOSITORIES: biostudies-literature
Publications
Author Correction: Enhanced stability in CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization.
López Carlos A CA Abia Carmen C Rodrigues Joao E JE Serrano-Sánchez Federico F Nemes Norbert M NM Martínez José L JL Fernandez-Díaz María T MT Biškup Neven N Alvarez-Galván Consuelo C Carrascoso Felix F Castellanos-Gomez Andres A Alonso José A JA
Scientific reports 20220519 1
Similar Datasets
Project description:Among the hybrid organic-inorganic perovskites MAPbX3 (MA: methyl-ammonium CH3-NH3+, X = halogen), the triiodide specimen (MAPbI3) is still the material of choice for solar energy applications. Although it is able to absorb light above its 1.6 eV bandgap, its poor stability in humid air atmosphere has been a major drawback for its use in solar cells. However, we discovered that this perovskite can be prepared by ball milling in a straightforward way, yielding specimens with a superior stability. This fact allowed us to take atomic-resolution STEM images for the first time, with sufficient quality to unveil microscopic aspects of this material. We demonstrated full Iodine content, which might be related to the enhanced stability, in a more compact PbI6 framework with reduced unit-cell volume. A structural investigation from neutron powder diffraction (NPD) data of an undeuterated specimen was essential to determine the configuration of the organic MA unit in the 100-298 K temperature range. A phase transition is identified, from the tetragonal structure observed at RT (space group I4/mcm) to an orthorhombic (space group Pnma) phase where the methyl-ammonium organic units are fully localized. Our NPD data reveal that the MA changes are gradual and start before reaching the phase transition. Optoelectronic measurements yield a photocurrent peak at an illumination wavelength of 820 nm, which is redshifted by 30 nm with respect to previously reported measurements on MAPbI3 perovskites synthesized by crystallization from organic solvents.
| S-EPMC7343856 | biostudies-literature
Project description:Hybrid organic-inorganic perovskite materials have attracted extensive attention due to their impressive performance in photovoltaic devices. One-dimensional perovskite CH₃NH₃PbI₃ nanomaterials, possessing unique structural features such as large surface-to-volume ratio, anisotropic geometry and quantum confinement, may have excellent optoelectronic properties, which could be utilized to fabricate high-performance photodetectors. However, in comparison to CH₃NH₃PbI₃ thin films, reports on the fabrication of CH₃NH₃PbI₃ nanowires for optoelectrical application are rather limited. Herein, a two-step spin-coating process has been utilized to fabricate pure-phase and single-crystalline CH₃NH₃PbI₃ nanowires on a substrate without mesoporous TiO₂ or Al₂O₃. The size and density of CH₃NH₃PbI₃ nanowires can be easily controlled by changing the PbI₂ precursor concentration. The as-prepared CH₃NH₃PbI₃ nanowires are utilized to fabricate photodetectors, which exhibit a fairly high switching ratio of ~600, a responsivity of 55 mA/W, and a normalized detectivity of 0.5 × 1011 jones under 532 nm light illumination (40 mW/cm²) at a very low bias voltage of 0.1 V. The as-prepared perovskite CH₃NH₃PbI₃ nanowires with excellent optoelectronic properties are regarded to be a potential candidate for high-performance photodetector application.
| S-EPMC5977332 | biostudies-literature
Project description:Organic-inorganic hybrid halide perovskites are proven to be a promising semiconductor material as the absorber layer of solar cells. However, the perovskite films always suffer from nonuniform coverage or high trap state density due to the polycrystalline characteristics, which degrade the photoelectric properties of thin films. Herein, the alkali metal ions which are stable against oxidation and reduction are used in the perovskite precursor solution to induce the process of crystallization and nucleation, then affect the properties of the perovskite film. It is found that the addition of the alkali metal ions clearly improves the quality of perovskite film: enlarges the grain sizes, reduces the defect state density, passivates the grain boundaries, increases the built-in potential (Vbi), resulting to the enhancement in the power conversion efficiency of perovskite thin film solar cell.
| S-EPMC5827644 | biostudies-literature
Project description:Understanding the excited-state dynamics in perovskite photovoltaics is necessary for progress in these materials, but changes in dynamics depending on the fabrication processes used for perovskite photoactive layers remain poorly characterised. Here we report a comparative study on femtosecond transient absorption (TA) in CH3NH3PbI3 perovskite films fabricated by various solution-processing methods. The grain sizes and the number of voids between grains on each film varied according to the film synthesis method. At the low excitation fluence of 0.37 μJ cm-2, fast signal drops in TA dyanmics within 1.5 ps were observed in all perovskite films, but the signal drop magnitudes differed becuase of the variations in charge migration to trap states and band gap renormalisation. For high excitation fluences, the buil-up time of the TA signal was increased by the activated hot-phonon bottleneck, while the signal decay rate was accelerated by fluence-dependent high-order charge recombination. These fluence-dependent dynamics changed for different perovskite fabrication methords, indicating that the dynamics were affected by morphological features such as grain sizes and defects.
| S-EPMC5705678 | biostudies-literature
Project description:Ultralow trap densities, exceptional optical and electronic properties have been reported for lead halide perovskites single crystals; however, ambiguities in basic properties, such as the band gap, and the electronic defect densities in the bulk and at the surface prevail. Here, we synthesize single crystals of methylammonium lead bromide (CH3NH3PbBr3), characterise the optical absorption and photoluminescence and show that the optical properties of single crystals are almost identical to those of polycrystalline thin films. We observe significantly longer lifetimes and show that carrier diffusion plays a substantial role in the photoluminescence decay. Contrary to many reports, we determine that the trap density in CH3NH3PbBr3 perovskite single crystals is 1015 cm-3, only one order of magnitude lower than in the thin films. Our enhanced understanding of optical properties and recombination processes elucidates ambiguities in earlier reports, and highlights the discrepancies in the estimation of trap densities from electronic and optical methods.Metal halide perovskites for optoelectronic devices have been extensively studied in two forms: single-crystals or polycrystalline thin films. Using spectroscopic approaches, Wenger et al. show that polycrystalline thin films possess similar optoelectronic properties to single crystals.
| S-EPMC5605602 | biostudies-literature
Project description:Supercapacitors (SCs) are widely used energy storage devices in various applications that require instantaneous power supply and fast response times; however, the challenge for achieving high performance demands the continuous development and tailoring of electrode materials. Organic-inorganic halide perovskites (OIHPs) have recently received significant attention in electrochemical energy storage and conversion applications due to their unique properties including high charge carrier mobility, high mixed (electronic-ionic) conductivity, and presence of large oxygen vacancies. This study presents the fabrication and use of OIHPs based on methyl-ammonium lead iodide (CH3NH3PbI3) and its Co2+- and Bi3+-substituted derivatives (CH3NH3Pb1-x Co x I3 and CH3NH3Pb1-x Bi x I3, respectively, where x = 0.1) as electrodes for SCs. SC devices were constructed symmetrically by sandwiching the synthesized electrode materials in a quasi-solid-state electrolyte between two TiO2-coated FTO glasses. We discussed the optimization parameters (i.e., A-site doping, B-site doping, and controlling the stoichiometry of the anion and cation) to improve the electrochemical performance of the fabricated SCs. Furthermore, the effects of substitution ions (Co2+ and Bi3+) on the charge-discharge performance, energy and power density, defects, crystallinity, and microstructure were demonstrated. Electrochemical performances of the electrodes were analyzed by using CV, EIS, and GCPL techniques. The highest power density of 934.6 W/kg was obtained for Bi-substituted perovskite electrodes. Fabricated SC devices show good cyclability with 97.2, 96.3, and 86.6% retention of the initial capacitances after 50 cycles for pure, Co2+-substituted, and Bi3+-substituted perovskite electrodes, respectively.
| S-EPMC9774324 | biostudies-literature
Project description:Perovskite solar cells (PSCs) have demonstrated remarkable photovoltaic performance, positioning themselves as promising devices in the field. Theoretical calculations suggest that copper (Cu) can serve as an effective dopant, potentially occupying interstitial sites in the perovskite structure, thereby reducing the energy barrier and enhancing carrier extraction. Subsequent experimental investigations confirm that adding CuI as an additive to MAPbI3-based perovskite cells improves optoelectronic properties and overall device performance. Optimizing the amount of Cu (0.01 M) has been found to significantly enhance crystalline quality and grain size, leading to improved light absorption and suppressed carrier recombination. Consequently, the power conversion efficiency (PCE) of Cu-doped PSCs increased from 16.3% to 18.2%. However, excessive Cu doping (0.1 M) negatively impacts morphology, resulting in inferior optical properties and diminished device performance. Furthermore, Cu-doped PSCs exhibit higher stabilized power output (SPO) compared to pristine cells. This study underscores the substantial benefits of Cu doping for advancing the development of highly efficient PSCs.
| S-EPMC10821043 | biostudies-literature
Project description:Here we identify structural inhomogeneity on a micrometer scale across the surface of a CH3NH3PbI3 perovskite single crystal. At the crystal edge a local distortion of the crystal lattice is responsible for a widening of the optical bandgap and faster photo-carrier recombination. These effects are inherently present at the edge of the crystal, and further enhanced upon water intercalation, as a preliminary step in the hydration of the perovskite material.
| S-EPMC5512535 | biostudies-literature
Project description:We report investigations on the influences of post-deposition treatments on the performance of solution-processed methylammonium lead triiodide (CH₃NH₃PbI₃)-based planar solar cells. The prepared films were stored in pure N₂ at room temperature or annealed in pure O₂ at room temperature, 45°C, 65°C and 85°C for 12 hours prior to the deposition of the metal electrodes. It is found that annealing in O₂ leads to substantial increase in the power conversion efficiencies (PCEs) of the devices. Furthermore, strong dependence on the annealing temperature for the PCEs of the devices suggests that a thermally activated process may underlie the observed phenomenon. It is believed that the annealing process may facilitate the diffusion of O₂ into the spiro-MeOTAD for inducing p-doping of the hole transport material. Furthermore, the process can result in lowering the localized state density at the grain boundaries as well as the bulk of perovskite. Utilizing thermal assisted O₂ annealing, high efficiency devices with good reproducibility were attained. A PCE of 15.4% with an open circuit voltage (VOC) 1.04 V, short circuit current density (JSC) 23 mA/cm(2), and fill factor 0.64 had been achieved for our champion device.
| S-EPMC4208060 | biostudies-literature
Project description:Ferroelectricity has been proposed as a plausible mechanism to explain the high photovoltaic conversion efficiency in organic-inorganic perovskites; however, convincing experimental evidence in support of this hypothesis is still missing. Identifying and distinguishing ferroelectricity from other properties, such as piezoelectricity, ferroelasticity, etc., is typically nontrivial because these phenomena can coexist in many materials. In this work, a combination of microscopic and nanoscale techniques provides solid evidence for the existence of ferroelastic domains in both CH3NH3PbI3 polycrystalline films and single crystals in the pristine state and under applied stress. Experiments show that the configuration of CH3NH3PbI3 ferroelastic domains in single crystals and polycrystalline films can be controlled with applied stress, suggesting that strain engineering may be used to tune the properties of this material. No evidence of concomitant ferroelectricity was observed. Because grain boundaries have an impact on the long-term stability of organic-inorganic perovskite devices, and because the ferroelastic domain boundaries may differ from regular grain boundaries, the discovery of ferroelasticity provides a new variable to consider in the quest for improving their stability and enabling their widespread adoption.
| S-EPMC5392022 | biostudies-literature