COVID-19 detection on Chest X-ray images: A comparison of CNN architectures and ensembles.
Ontology highlight
ABSTRACT:
SUBMITTER: Breve FA
PROVIDER: S-EPMC9122742 | biostudies-literature | 2022 Oct
REPOSITORIES: biostudies-literature
Publications
COVID-19 detection on Chest X-ray images: A comparison of CNN architectures and ensembles.
Expert systems with applications 20220521
COVID-19 quickly became a global pandemic after only four months of its first detection. It is crucial to detect this disease as soon as possible to decrease its spread. The use of chest X-ray (CXR) images became an effective screening strategy, complementary to the reverse transcription-polymerase chain reaction (RT-PCR). Convolutional neural networks (CNNs) are often used for automatic image classification and they can be very useful in CXR diagnostics. In this paper, 21 different CNN architec ...[more]
Similar Datasets
Project description:Corona virus disease-2019 (COVID-19) is a pandemic caused by novel coronavirus. COVID-19 is spreading rapidly throughout the world. The gold standard for diagnosing COVID-19 is reverse transcription-polymerase chain reaction (RT-PCR) test. However, the facility for RT-PCR test is limited, which causes early diagnosis of the disease difficult. Easily available modalities like X-ray can be used to detect specific symptoms associated with COVID-19. Pre-trained convolutional neural networks are widely used for computer-aided detection of diseases from smaller datasets. This paper investigates the effectiveness of multi-CNN, a combination of several pre-trained CNNs, for the automated detection of COVID-19 from X-ray images. The method uses a combination of features extracted from multi-CNN with correlation based feature selection (CFS) technique and Bayesnet classifier for the prediction of COVID-19. The method was tested using two public datasets and achieved promising results on both the datasets. In the first dataset consisting of 453 COVID-19 images and 497 non-COVID images, the method achieved an AUC of 0.963 and an accuracy of 91.16%. In the second dataset consisting of 71 COVID-19 images and 7 non-COVID images, the method achieved an AUC of 0.911 and an accuracy of 97.44%. The experiments performed in this study proved the effectiveness of pre-trained multi-CNN over single CNN in the detection of COVID-19.
| S-EPMC7467028 | biostudies-literature
Project description:The COVID-19 epidemic has a catastrophic impact on global well-being and public health. More than 27 million confirmed cases have been reported worldwide until now. Due to the growing number of confirmed cases, and challenges to the variations of the COVID-19, timely and accurate classification of healthy and infected patients is essential to control and treat COVID-19. We aim to develop a deep learning-based system for the persuasive classification and reliable detection of COVID-19 using chest radiography. Firstly, we evaluate the performance of various state-of-the-art convolutional neural networks (CNNs) proposed over recent years for medical image classification. Secondly, we develop and train CNN from scratch. In both cases, we use a public X-Ray dataset for training and validation purposes. For transfer learning, we obtain 100% accuracy for binary classification (i.e., Normal/COVID-19) and 87.50% accuracy for tertiary classification (Normal/COVID-19/Pneumonia). With the CNN trained from scratch, we achieve 93.75% accuracy for tertiary classification. In the case of transfer learning, the classification accuracy drops with the increased number of classes. The results are demonstrated by comprehensive receiver operating characteristics (ROC) and confusion metric analysis with 10-fold cross-validation.
| S-EPMC8782355 | biostudies-literature
Project description:The distinction between normal chest x-ray (CXR) images and abnormal ones containing features of disease (e.g., opacities, consolidation, etc.) is important for accurate medical diagnosis. CXR images contain valuable information concerning the physiological and pathological state of the lungs and airways. In addition, they provide information about the heart, chest bones, and some arteries (e.g., Aorta and pulmonary arteries). Deep learning artificial intelligence has taken great strides in the development of sophisticated medical models in a wide range of applications. More specifically, it has been shown to provide highly accurate diagnosis and detection tools. The dataset presented in this article contains the chest x-ray images from the examination of confirmed COVID-19 subjects, who were admitted for a multiday stay at a local hospital in northern Jordan. To provide a diverse dataset, only one CXR image per subject was included in the data. The dataset can be used for the development of automated methods that detect COVID-19 from CXR images (COVID-19 vs. normal) and distinguish pneumonia caused by COVID-19 from other pulmonary diseases. ©202x The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
| S-EPMC9937995 | biostudies-literature
Project description:ObjectiveThis study aims to develop and test a new computer-aided diagnosis (CAD) scheme of chest X-ray images to detect coronavirus (COVID-19) infected pneumonia.MethodCAD scheme first applies two image preprocessing steps to remove the majority of diaphragm regions, process the original image using a histogram equalization algorithm, and a bilateral low-pass filter. Then, the original image and two filtered images are used to form a pseudo color image. This image is fed into three input channels of a transfer learning-based convolutional neural network (CNN) model to classify chest X-ray images into 3 classes of COVID-19 infected pneumonia, other community-acquired no-COVID-19 infected pneumonia, and normal (non-pneumonia) cases. To build and test the CNN model, a publicly available dataset involving 8474 chest X-ray images is used, which includes 415, 5179 and 2,880 cases in three classes, respectively. Dataset is randomly divided into 3 subsets namely, training, validation, and testing with respect to the same frequency of cases in each class to train and test the CNN model.ResultsThe CNN-based CAD scheme yields an overall accuracy of 94.5 % (2404/2544) with a 95 % confidence interval of [0.93,0.96] in classifying 3 classes. CAD also yields 98.4 % sensitivity (124/126) and 98.0 % specificity (2371/2418) in classifying cases with and without COVID-19 infection. However, without using two preprocessing steps, CAD yields a lower classification accuracy of 88.0 % (2239/2544).ConclusionThis study demonstrates that adding two image preprocessing steps and generating a pseudo color image plays an important role in developing a deep learning CAD scheme of chest X-ray images to improve accuracy in detecting COVID-19 infected pneumonia.
| S-EPMC7510591 | biostudies-literature
Project description:Even after scavenging the existence of mankind for the past year, the wrath of CoVID-19 is yet to die down. Countries like India are still getting haunted by the devastating conundrum, with coronavirus ripping through its citizens in the concurrent second wave. The surge of cases has prompted rapid intervention, with medical authorities pushing it to the limit to curve a roadblock to its aggressive growth. But, even after effortless work, human intervention remains slow and insufficient. Furthermore, relevant testing methodologies have shown weakness while detecting threats, with the recent growth of post-Covid complexities, thereby leaving a painful mark. This as such created a major requirement for technological advancements, which can cater to the mass. The growth of computational prowess in the past decade made the field of Deep Learning a major contributor in curving out algorithms to solve this. Adding to the excellent foundation of Deep Learning, this paper, proposes a novel CoWarriorNet model for rapid detection of CoVID-19, via chest X-ray images, which adds in an extra layer of precision and confirmation in the detection of cases in both pre-Covid and post-Covid conditions. The proposed classification model curves out an excellent accuracy of 97.8%, with the major eye-candy being the sensitivity rate of 0.99 when detecting CoVID-19 cases. This model introduces a new concept of Alpha Trimmed Average Pooling, which along with the novel architecture adds a subtle touch to its high efficiency, thereby giving a much-needed solution to the medical experts. The two-mouthed architecture provides the added benefit of a confidence score, deducing human aid in case of discrepancy.Supplementary informationThe online version contains supplementary material available at 10.1007/s00354-021-00143-1.
| S-EPMC8639408 | biostudies-literature
Project description:Computer-aided diagnosis for the reliable and fast detection of coronavirus disease (COVID-19) has become a necessity to prevent the spread of the virus during the pandemic to ease the burden on the healthcare system. Chest X-ray (CXR) imaging has several advantages over other imaging and detection techniques. Numerous works have been reported on COVID-19 detection from a smaller set of original X-ray images. However, the effect of image enhancement and lung segmentation of a large dataset in COVID-19 detection was not reported in the literature. We have compiled a large X-ray dataset (COVQU) consisting of 18,479 CXR images with 8851 normal, 6012 non-COVID lung infections, and 3616 COVID-19 CXR images and their corresponding ground truth lung masks. To the best of our knowledge, this is the largest public COVID positive database and the lung masks. Five different image enhancement techniques: histogram equalization (HE), contrast limited adaptive histogram equalization (CLAHE), image complement, gamma correction, and balance contrast enhancement technique (BCET) were used to investigate the effect of image enhancement techniques on COVID-19 detection. A novel U-Net model was proposed and compared with the standard U-Net model for lung segmentation. Six different pre-trained Convolutional Neural Networks (CNNs) (ResNet18, ResNet50, ResNet101, InceptionV3, DenseNet201, and ChexNet) and a shallow CNN model were investigated on the plain and segmented lung CXR images. The novel U-Net model showed an accuracy, Intersection over Union (IoU), and Dice coefficient of 98.63%, 94.3%, and 96.94%, respectively for lung segmentation. The gamma correction-based enhancement technique outperforms other techniques in detecting COVID-19 from the plain and the segmented lung CXR images. Classification performance from plain CXR images is slightly better than the segmented lung CXR images; however, the reliability of network performance is significantly improved for the segmented lung images, which was observed using the visualization technique. The accuracy, precision, sensitivity, F1-score, and specificity were 95.11%, 94.55%, 94.56%, 94.53%, and 95.59% respectively for the segmented lung images. The proposed approach with very reliable and comparable performance will boost the fast and robust COVID-19 detection using chest X-ray images.
| S-EPMC7946571 | biostudies-literature
Project description:Background and objectiveThe novel Coronavirus also called COVID-19 originated in Wuhan, China in December 2019 and has now spread across the world. It has so far infected around 1.8 million people and claimed approximately 114,698 lives overall. As the number of cases are rapidly increasing, most of the countries are facing shortage of testing kits and resources. The limited quantity of testing kits and increasing number of daily cases encouraged us to come up with a Deep Learning model that can aid radiologists and clinicians in detecting COVID-19 cases using chest X-rays.MethodsIn this study, we propose CoroNet, a Deep Convolutional Neural Network model to automatically detect COVID-19 infection from chest X-ray images. The proposed model is based on Xception architecture pre-trained on ImageNet dataset and trained end-to-end on a dataset prepared by collecting COVID-19 and other chest pneumonia X-ray images from two different publically available databases.ResultsCoroNet has been trained and tested on the prepared dataset and the experimental results show that our proposed model achieved an overall accuracy of 89.6%, and more importantly the precision and recall rate for COVID-19 cases are 93% and 98.2% for 4-class cases (COVID vs Pneumonia bacterial vs pneumonia viral vs normal). For 3-class classification (COVID vs Pneumonia vs normal), the proposed model produced a classification accuracy of 95%. The preliminary results of this study look promising which can be further improved as more training data becomes available.ConclusionCoroNet achieved promising results on a small prepared dataset which indicates that given more data, the proposed model can achieve better results with minimum pre-processing of data. Overall, the proposed model substantially advances the current radiology based methodology and during COVID-19 pandemic, it can be very helpful tool for clinical practitioners and radiologists to aid them in diagnosis, quantification and follow-up of COVID-19 cases.
| S-EPMC7274128 | biostudies-literature
Project description:The number of coronavirus disease (COVID-19) cases is constantly rising as the pandemic continues, with new variants constantly emerging. Therefore, to prevent the virus from spreading, coronavirus cases must be diagnosed as soon as possible. The COVID-19 pandemic has had a devastating impact on people's health and the economy worldwide. For COVID-19 detection, reverse transcription-polymerase chain reaction testing is the benchmark. However, this test takes a long time and necessitates a lot of laboratory resources. A new trend is emerging to address these limitations regarding the use of machine learning and deep learning techniques for automatic analysis, as these can attain high diagnosis results, especially by using medical imaging techniques. However, a key question arises whether a chest computed tomography scan or chest X-ray can be used for COVID-19 detection. A total of 17,599 images were examined in this work to develop the models used to classify the occurrence of COVID-19 infection, while four different classifiers were studied. These are the convolutional neural network (proposed architecture (named, SCovNet) and Resnet18), support vector machine, and logistic regression. Out of all four models, the proposed SCoVNet architecture reached the best performance with an accuracy of almost 99% and 98% on chest computed tomography scan images and chest X-ray images, respectively.
| S-EPMC9858730 | biostudies-literature
Project description:The immense spread of coronavirus disease 2019 (COVID-19) has left healthcare systems incapable to diagnose and test patients at the required rate. Given the effects of COVID-19 on pulmonary tissues, chest radiographic imaging has become a necessity for screening and monitoring the disease. Numerous studies have proposed Deep Learning approaches for the automatic diagnosis of COVID-19. Although these methods achieved outstanding performance in detection, they have used limited chest X-ray (CXR) repositories for evaluation, usually with a few hundred COVID-19 CXR images only. Thus, such data scarcity prevents reliable evaluation of Deep Learning models with the potential of overfitting. In addition, most studies showed no or limited capability in infection localization and severity grading of COVID-19 pneumonia. In this study, we address this urgent need by proposing a systematic and unified approach for lung segmentation and COVID-19 localization with infection quantification from CXR images. To accomplish this, we have constructed the largest benchmark dataset with 33,920 CXR images, including 11,956 COVID-19 samples, where the annotation of ground-truth lung segmentation masks is performed on CXRs by an elegant human-machine collaborative approach. An extensive set of experiments was performed using the state-of-the-art segmentation networks, U-Net, U-Net++, and Feature Pyramid Networks (FPN). The developed network, after an iterative process, reached a superior performance for lung region segmentation with Intersection over Union (IoU) of 96.11% and Dice Similarity Coefficient (DSC) of 97.99%. Furthermore, COVID-19 infections of various shapes and types were reliably localized with 83.05% IoU and 88.21% DSC. Finally, the proposed approach has achieved an outstanding COVID-19 detection performance with both sensitivity and specificity values above 99%.
| S-EPMC8556687 | biostudies-literature
Project description:The COVID-19 pandemic is causing a major outbreak in more than 150 countries around the world, having a severe impact on the health and life of many people globally. One of the crucial step in fighting COVID-19 is the ability to detect the infected patients early enough, and put them under special care. Detecting this disease from radiography and radiology images is perhaps one of the fastest ways to diagnose the patients. Some of the early studies showed specific abnormalities in the chest radiograms of patients infected with COVID-19. Inspired by earlier works, we study the application of deep learning models to detect COVID-19 patients from their chest radiography images. We first prepare a dataset of 5000 Chest X-rays from the publicly available datasets. Images exhibiting COVID-19 disease presence were identified by board-certified radiologist. Transfer learning on a subset of 2000 radiograms was used to train four popular convolutional neural networks, including ResNet18, ResNet50, SqueezeNet, and DenseNet-121, to identify COVID-19 disease in the analyzed chest X-ray images. We evaluated these models on the remaining 3000 images, and most of these networks achieved a sensitivity rate of 98% ( ± 3%), while having a specificity rate of around 90%. Besides sensitivity and specificity rates, we also present the receiver operating characteristic (ROC) curve, precision-recall curve, average prediction, and confusion matrix of each model. We also used a technique to generate heatmaps of lung regions potentially infected by COVID-19 and show that the generated heatmaps contain most of the infected areas annotated by our board certified radiologist. While the achieved performance is very encouraging, further analysis is required on a larger set of COVID-19 images, to have a more reliable estimation of accuracy rates. The dataset, model implementations (in PyTorch), and evaluations, are all made publicly available for research community at https://github.com/shervinmin/DeepCovid.git.
| S-EPMC7372265 | biostudies-literature