Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Multilayer films of exfoliated 2D oxide nanosheets by electrospray deposition.

ABSTRACT: The potential of the electrospray deposition technique as new method to make nanosheet-based multilayer films is evaluated. Densely packed nanosheet-based films with thicknesses of 1-20 nm with rms roughnesses of 2.1-2.4 nm were fabricated on samples of 1 cm² size with a growth rate of 0.5 nm/min. Electrosprayed Ti_0.87O₂ nanosheet films were successfully used as oriented growth templates for 40 nm perovskite SrRuO₃ thin films grown by pulsed laser deposition. The electrospray method provides a fast and easy alternative to the more commonly used Langmuir-Blodgett (LB) deposition method for nanosheet films.

SUBMITTER: Nunnenkamp M

PROVIDER: S-EPMC9126931 | biostudies-literature | 2022 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Multilayer films of exfoliated 2D oxide nanosheets by electrospray deposition.

Nunnenkamp Moritz M van den Nieuwenhuijzen Karin J H KJH Ten Elshof Johan E JE

Scientific reports 20220523 1

The potential of the electrospray deposition technique as new method to make nanosheet-based multilayer films is evaluated. Densely packed nanosheet-based films with thicknesses of 1-20 nm with rms roughnesses of 2.1-2.4 nm were fabricated on samples of 1 cm2 size with a growth rate of 0.5 nm/min. Electrosprayed Ti0.87O2 nanosheet films were successfully used as oriented growth templates for 40 nm perovskite SrRuO3 thin films grown by pulsed laser depo ...[more]

PMID: 35606408

Similar Datasets

Gas permeation and microstructure of reduced graphene oxide/polyethyleneimine multilayer films created via recast and layer-by-layer deposition processes.

Project description:Nowadays, graphene/polymer composite films with multilayer structure have attracted significant attention for gas barrier application. In this study, a series of reduced graphene oxide/polyethyleneimine (RGO/PEI) composite films were created via recast and layer-by-layer deposition processes. By using the recast process, the myriad PEI molecules in the precursor solution (the PEI : GO feeding ratio is 0.02 : 0.1, 0.05 : 0.1, 0.1 : 0.1, 0.3 : 0.1 and 0.5 : 0.1) ensure more effective reduction and surface modification of the graphene oxide (GO) sheets, while the undesirable free PEI molecules are eventually removed via a filtration process. Then, the RGO/PEI composite films were synthesized on PET substrate using a layer-by-layer assembly. The resulting films show a homogeneous and compact brick-wall structure with excellent gas barrier properties. Barriers against water vapor, nitrogen/oxygen, and carbon dioxide require different content of PEI in the composite film for optimal performance; the ideal values are 19.7, 23.8, and 24.1 wt%, respectively. These values are much lower compared with previously reported studies. Further, the permeability, free volumes, component ratio, morphology, and density of the RGO/PEI composite films have been carefully investigated and discussed. The results revealed that the mechanism behind the excellent gas barrier property of the RGO/PEI composite films is a synergistic effect created by the combination of the brick-wall structure, the small free volume holes, the suitable PEI content (ranging from 19.7 wt% to 24.1 wt%), the high density, and the hydrophobicity.

| S-EPMC8982006 | biostudies-literature

WS2 Nanotubes, 2D Nanomeshes, and 2D In-Plane Films through One Single Chemical Vapor Deposition Route.

Project description:We demonstrate a versatile, catalyst free chemical vapor deposition process on insulating substrates capable of producing in one single stream one-dimensional (1D) WO3- x suboxides leading to a wide range of substrate-supported 2H-WS2 polymorphs: a tunable class of out-of-plane (of the substrate) nanophases, with 1D nanotubes and a pure WS2, two-dimensional (2D) nanomesh (defined as a network of webbed, micron-size, few-layer 2D sheets) at its extremes; and in-plane (parallel to the substrate) mono- and few-layer 2D domains. This entails a two-stage approach in which the 2WO3 + 7S → 2WS2 + 3SO2 reaction is intentionally decoupled. First, various morphologies of nanowires or nanorods of high stoichiometry, WO2.92/WO2.9 suboxides (belonging to the class of Magnéli phases) were formed, followed by their sulfurization to undergo reduction to the aforementioned WS2 polymorphs. The continuous transition of WS2 from nanotubes to the out-of-plane 2D nanomesh, via intermediary, mixed 1D-2D phases, delivers tunable functional properties, for example, linear and nonlinear optical properties, such as reflectivity (linked to optical excitations in the material), and second harmonic generation (SHG) and onset of saturable absorption. The SHG effect is very strong across the entire tunable class of WS2 nanomaterials, weakest in nanotubes, and strongest in the 2D nanomesh. Furthermore, a mechanism via suboxide (WO3- x) intermediate as a possible path to 2D domain growth is demonstrated. 2D, in-plane WS2 domains grow via "self-seeding and feeding" where short WO2.92/WO2.9 nanorods provide both the nucleation sites and the precursor feedstock. Understanding the reaction path (here, in the W-O-S space) is an emerging approach toward controlling the nucleation, growth, and morphology of 2D domains and films of transition-metal dichalcogenides.

| S-EPMC7007277 | biostudies-literature

Steric Effects in the Deposition Mode and Drug-Delivering Efficiency of Nanocapsule-Based Multilayer Films.

Project description:Using surface-initiated atom transfer radical polymerization (ATRP), block polymers with a series of quaternization degrees were coated on the surface of silica nanocapsules (SNCs) by the "grafting-from" technique. Molnupiravir, an antiviral medicine urgently approved for the treatment of SARS-CoV-2, was encapsulated in polymer-coated SNCs and further incorporated into well-defined films with polystyrene sulfonate (PSS) homopolymers by layer-by-layer (LBL) self-assembly via electrostatic interactions. We investigated the impact of the quaternization degree of the polymers and steric hindrance of functional groups on the growth mode, swelling/deswelling transition, and drug-delivering efficiency of the obtained LBL films. The SNCs were derived from coronas of parent block polymers of matched molecular weights-poly(N-isopropylacrylamide)-block-poly(N,N-dimethylaminoethyl methacrylate) (PNIPAM-b-PDMAEMA)-by quaternization with methyl sulfate. As revealed by the data results, SNCs with coronas with higher quaternization degrees resulted in a larger layering distance of the film structure because of weaker ionic pairing (due to the presence of a bulky methyl spacer) between SNCs and PSS. Interestingly, when comparing the drug release profile of the encapsulated drugs from SNC-based films, the release rate was slower in the case of capsule coronas with higher quaternization degrees because of the larger diffusion distance of the encapsulated drugs and stronger hydrophobic-hydrophobic interactions between SNCs and drug molecules.

| S-EPMC9434745 | biostudies-literature

Solid-state surfactant templating for controlled synthesis of amorphous 2D oxide/oxyhydroxide nanosheets.

Project description:As a member of 2D family, amorphous 2D nanosheets have received increasing attention due to their unique properties that are distinct from crystalline 2D nanosheets. However, compared with the vast library of crystalline 2D nanosheets, amorphous 2D nanosheets are still infancy due to the lack of an efficient synthetic approach. Here, we present a strategy that yields a library of 10 distinct amorphous 2D metal oxides/oxyhydroxides using solid-state surfactant crystals. A key feature of this process is a stepwise reaction using solid surfactant; the solid-state surfactant crystals have metal ions arranged in the interlayer space, and hydrolysis of the metal ions leads to the formation of isolated clusters in the surfactant crystals via limited condensation reactions. Immersing the surfactant crystals in formamide promotes nanosheet formation through the self-assembly of clusters by templating the morphologies of the crystals generated from surfactants crystals. Our approach opens a flatland in amorphous 2D world.

| S-EPMC11298516 | biostudies-literature

Enhanced Room-Temperature Ethanol Detection by Quasi 2D Nanosheets of an Exfoliated Polymeric Graphitized Carbon Nitride Composite-Based Patterned Sensor

Project description:A novel room-temperature gas sensor composed of polymeric

| S-EPMC9685765 | biostudies-literature

Exploring Feedstock Recycling in Liquid-Phase-Exfoliated Nanosheets.

Project description:Industrial scale-up of two-dimensional (2D) nanomaterial production is essential if these novel materials are to prove themselves commercially viable for applications ranging from energy conversion and storage to optoelectronic devices and clean water. There are several techniques to produce 2D materials, and liquid phase exfoliation (LPE) is one that has emerged as the most widespread across laboratory, pilot, and industrial production scales. One of the main issues faced in the scale-up of such techniques is the low yield (typically 0.5-5 wt %), resulting in high levels of wasted feedstock material. Similarly, every 10 kg of product can create 1000 L or more of solvent waste, many of which are highly toxic to the environment (e.g., NMP). Using MoS2 as a prototypical 2D material, this work demonstrates a sustainable approach to recover and reuse unexfoliated precursor material and the exfoliation solvent to reduce waste by up to 82% and solvent requirement by up to 72%. Material production efficiency benefits were also achieved, with over 3-fold increase in product yield and energy usage reduced by up to 12%. The approach can be easily scaled and immediately implemented using existing infrastructure, and a pathway for industrial implementation has been outlined to support this.

| S-EPMC11445721 | biostudies-literature

Nanostructured and Advanced Designs from Biomass and Mineral Residues: Multifunctional Biopolymer Hydrogels and Hybrid Films Reinforced with Exfoliated Mica Nanosheets.

Project description:Transforming potential waste materials into high-value-added sustainable materials with advanced properties is one of the key targets of the emerging green circular economy. Natural mica (muscovite) is abundant in the mining industry, which is commonly regarded as a byproduct and gangue mineral flowing to waste rock and mine tailings. Similarly, chitin is the second-most abundant biomass resource on Earth after cellulose, extracted as a byproduct from the exoskeleton of crustaceans, fungal mycelia, and mushroom wastes. In this study, exfoliated mica nanosheets were individualized using a mechanochemical process and incorporated into regenerated chitin matrix through an alkali dissolution system (KOH/urea) to result in a multifunctional, hybrid hydrogel, and film design. The hydrogels displayed a hierarchical and open nanoporous structure comprising an enhanced, load-bearing double-cross-linked polymeric chitin network strengthened by mica nanosheets possessing high stiffness after high-temperature curing, while the hybrid films (HFs) exhibited favorable UV-shielding properties, optical transparency, and dielectric properties. These hybrid designs derived from industrial residues pave the way toward sustainable applications for many future purposes, such as wearable devices and tissue engineering/drug delivery.

| S-EPMC8662632 | biostudies-literature

Holey MoS2 Nanosheets with Photocatalytic Metal Rich Edges by Ambient Electrospray Deposition for Solar Water Disinfection.

Project description:A new method for creating nanopores in single-layer molybdenum disulfide (MoS2) nanosheets (NSs) by the electrospray deposition of silver ions on a water suspension of the former is introduced. Electrospray-deposited silver ions react with the MoS2 NSs at the liquid-air interface, resulting in Ag2S nanoparticles which enter the solution, leaving the NSs with holes of 3-5 nm diameter. Specific reaction with the S of MoS2 NSs leads to Mo-rich edges. Such Mo-rich defects are highly efficient for the generation of active oxygen species such as H2O2 under visible light which causes efficient disinfection of water. 105 times higher efficiency in disinfection for the holey MoS2 NSs in comparison to normal MoS2 NSs is shown. Experiments are performed with multiple bacterial strains and a virus strain, demonstrating the utility of the method for practical applications. A conceptual prototype is also presented.

| S-EPMC6607134 | biostudies-literature

Exfoliated near infrared fluorescent silicate nanosheets for (bio)photonics.

Project description:Imaging of complex (biological) samples in the near-infrared (NIR) is beneficial due to reduced light scattering, absorption, phototoxicity, and autofluorescence. However, there are few NIR fluorescent materials known and suitable for biomedical applications. Here we exfoliate the layered pigment CaCuSi4O10 (Egyptian Blue, EB) via ball milling and facile tip sonication into NIR fluorescent nanosheets (EB-NS). The size of EB-NS can be tailored to diameters <20 nm and heights down to 1 nm. EB-NS fluoresce at 910 nm and the fluorescence intensity correlates with the number of Cu2+ ions. Furthermore, EB-NS display no bleaching and high brightness compared with other NIR fluorophores. The versatility of EB-NS is demonstrated by in-vivo single-particle tracking and microrheology measurements in Drosophila melanogaster embryos. EB-NS can be uptaken by plants and remotely detected in a low-cost stand-off detection setup. In summary, EB-NS have the potential for a wide range of bioimaging applications.

| S-EPMC7083911 | biostudies-literature

Photocatalytic Hydrogen Evolution over Exfoliated Rh-Doped Titanate Nanosheets.

Project description:Various amounts of Rh-doped titanate nanosheets (Ti3NS:Rh(x), where x is doped amount) were prepared to develop a new nanostructured photocatalyst based on metal oxide compounds that can split water to produce H2 under sunlight. Ti3NS:Rh(x) was obtained by acid exchange, intercalation, and exfoliation of Rh-doped layered sodium titanate compound (Na2Ti3-x Rh x O7). A new energy gap was found in the diffuse reflection spectrum of the Ti3NS:Rh(x) colloidal suspension solution; this new energy gap corresponds to electrons in the 4d level of Rh3+ or Rh4+, which are doped in the Ti4+ site. A photocatalyst activity of Ti3NS:Rh(x) for H2 evolution in water with triethylamine (TEA) as an electron donor was investigated. The appropriate amount of Rh doping can improve the photocatalytic activity of Ti3NS for H2 evolution from water using triethylamine (TEA) as a sacrifice agent. The reason was related to the rich state of Rh3+ or Rh4+ doped in the Ti4+ site of Ti3NS. Doping Rh 1 mol % of Ti, Ti3NS:Rh(0.03) shows the H2 evolution rates up to 1040 nmol/h, which is about 25 times larger than that of nondoped Ti3NS under UV irradiation (>220 nm) and 302 nmol/h under near-UV irradiation (>340 nm). These results show that the development of new nanostructured photocatalyst based on Rh-doped titanate compounds that can produce H2 under near-UV irradiation present in sunlight was a success.

| S-EPMC7203949 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data