A 3D-printed scaffold-based osteosarcoma model allows to investigate tumor phenotypes and pathogenesis in an in vitro bone-mimicking niche.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang ML
PROVIDER: S-EPMC9161108 | biostudies-literature | 2022 Jun
REPOSITORIES: biostudies-literature
Publications
A 3D-printed scaffold-based osteosarcoma model allows to investigate tumor phenotypes and pathogenesis in an in vitro bone-mimicking niche.
Wang Mei-Ling ML Xu Nian-Yuan NY Tang Rui-Zhi RZ Liu Xi-Qiu XQ
Materials today. Bio 20220525
Image 1. ...[more]
Similar Datasets
Project description:Osteosarcoma is a primary bone tumor characterized by a dismal prognosis, especially in the case of recurrent disease or metastases. Therefore, tools to understand in-depth osteosarcoma progression and ultimately develop new therapeutics are urgently required. 3D in vitro models can provide an optimal option, as they are highly reproducible, yet sufficiently complex, thus reliable alternatives to 2D in vitro and in vivo models. Here, we describe 3D in vitro osteosarcoma models prepared by printing polyurethane (PU) by fused deposition modeling, further enriched with human mesenchymal stromal cell (hMSC)-secreted biomolecules. We printed scaffolds with different morphologies by changing their design (i.e., the distance between printed filaments and printed patterns) to obtain different pore geometry, size, and distribution. The printed PU scaffolds were stable during in vitro cultures, showed adequate porosity (55-67%) and tunable mechanical properties (Young's modulus ranging in 0.5-4.0 MPa), and resulted in cytocompatible. We developed the in vitro model by seeding SAOS-2 cells on the optimal PU scaffold (i.e., 0.7 mm inter-filament distance, 60° pattern), by testing different pre-conditioning factors: none, undifferentiated hMSC-secreted, and osteo-differentiated hMSC-secreted extracellular matrix (ECM), which were obtained by cell lysis before SAOS-2 seeding. Scaffolds pre-cultured with osteo-differentiated hMSCs, subsequently lysed, and seeded with SAOS-2 cells showed optimal colonization, thus disclosing a suitable biomimetic microenvironment for osteosarcoma cells, which can be useful both in tumor biology study and, possibly, treatment.
| S-EPMC9025808 | biostudies-literature
Project description:Osteosarcoma resection is challenging due to the variable location of tumors and their proximity with surrounding tissues. It also carries a high risk of postoperative complications. To overcome the challenge in precise osteosarcoma resection, computer-aided design (CAD) was used to design patient-specific guiding templates for osteosarcoma resection on the basis of the computer tomography (CT) scan and magnetic resonance imaging (MRI) of the osteosarcoma of human patients. Then 3D printing technique was used to fabricate the guiding templates. The guiding templates were used to guide the osteosarcoma surgery, leading to more precise resection of the tumorous bone and the implantation of the bone implants, less blood loss, shorter operation time and reduced radiation exposure during the operation. Follow-up studies show that the patients recovered well to reach a mean Musculoskeletal Tumor Society score of 27.125.
| S-EPMC4800413 | biostudies-other
Project description:Regenerating critical-sized long bone defects poses substantial challenges due to limitations of autografts and processed allografts. Biomaterial scaffolds offer versatile alternatives, yet their effectiveness is often constrained by their limited innate osteoinductivity. While growth factors and cells can enhance osteoinduction, the inclusion of biologics in biomaterial scaffolds creates regulatory challenges for clinical translation. To address this, here we describe three-dimensional (3D) printed polycaprolactone (PCL) scaffolds for temporally controlled delivery of osteoimmunomodulatory amorphous calcium phosphate-chitosan nanoparticles (ACPC-NP). In vitro, the ACPC-NP exhibit concentration dependent effects on osteoblasts, monocytes, and osteoclasts. At increasing concentrations up to 500 μg/ml, these nanoparticles stimulate osteogenesis, modulate M2/M1 macrophage polarization, and inhibit osteoclast maturation and activity. Leveraging these concentration-dependent effects in vivo through temporally controlled release of ACPC-NP from 3D-printed PCL scaffolds, we observe the complete regeneration and the restoration of biomechanical strength of critically sized radial defects in rats. Such healing is absent in defects implanted with bare PCL scaffolds or those loaded with calcium-phosphate microparticles. The tunable osteoimmunomodulation by the NP underscore the translational potential of this technology to yield structurally sound and functionally robust bone regeneration outcomes.
2024-07-02 | GSE262295 | GEO
Project description:Fabricating soft functional materials via additive manufacturing is an emerging field with a wide variety of applications due to their ability to respond to specifically engineered stimuli (e.g., mechanical, electrical, magnetic, chemical). This article describes an approach to engineering magnetically sensitive structures using three-dimensional printing of acrylonitrile butadiene styrene scaffolds. These scaffolds are encapsulated in polydimethylsiloxane (PDMS) and removed using organic solvents. The open channels that remain after removal are filled in with a ferrofluid to render the structure magnetically sensitive. A three-point flexural test shows that introducing a channel in this way only reduces the flexural modulus of the PDMS by a factor ∼8%. We perform magnetic deflection experiments on samples with three different channel diameters. Our results show a linear dependence between applied magnetic field strength and deflection. We also find that there is a minimum magnetic field strength that needs to be applied to achieve deflection. These results suggest that there is a minimum yield stress, beyond which deflection will occur. We perform experiments on a more complex channel geometry to find that there are multiple modes of deflection. A rational approach to channel design may enable us to tune the mechanical response and direct these actuators to undergo complex motion.
| S-EPMC9828599 | biostudies-literature
Project description:High numbers of autologous human primary keratinocytes (HPKs) are required for patients with burns, wounds and for gene therapy of skin disorders. Although freshly isolated HPKs exhibit a robust regenerative capacity, traditional methodology fails to provide a sufficient number of cells. Here we demonstrated a well characterized, non-cytotoxic and inert hydrogel as a substrate that mimics skin elasticity, which can accelerate proliferation and generate higher numbers of HPKs compared to existing tissue culture plastic (TCP) dishes. More importantly, this novel method was independent of feeder layer or any exogenous pharmaceutical drug. The HPKs from the hydrogel-substrate were functional as demonstrated by wound-healing assay, and the expression of IFN-γ-responsive genes (CXCL10, HLADR). Importantly, gene delivery efficiency by a lentiviral based delivery system was significantly higher in HPKs cultured on hydrogels compared with TCP. In conclusion, our study provides the first evidence that cell-material mechanical interaction is enough to provide a rapid expansion of functional keratinocytes that might be used as autologous grafts for skin disorders.
| S-EPMC6592153 | biostudies-literature
Project description:Inorganic-organic hybrid biomaterials made with star polymer poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) and silica, which show promising mechanical properties, are 3D printed as bone substitutes for the first time, by direct ink writing of the sol. Three different inorganic:organic ratios of poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate)-star-SiO2 hybrid inks are printed with pore channels in the range of 100-200 µm. Mechanical properties of the 3D printed scaffolds fall within the range of trabecular bone, and MC3T3 pre-osteoblast cells are able to adhere to the scaffolds in vitro, regardless of their compositions. Osteogenic and angiogenic properties of the hybrid scaffolds are shown using a rat calvarial defect model. Hybrid scaffolds with 40:60 inorganic:organic composition are able to instigate new vascularized bone formation within its pore channels and polarize macrophages toward M2 phenotype. 3D printing inorganic-organic hybrids with sophisticated polymer structure opens up possibilities to produce novel bone graft materials.
| S-EPMC7615494 | biostudies-literature
Project description:ObjectivesTo investigate the feasibility of the 3D printed scaffold for periapical bone defects.MethodsIn this study, antimicrobial peptide KSL-W-loaded PLGA sustainable-release microspheres (KSL-W@PLGA) were firstly prepared followed by assessing the drug release behavior and bacteriostatic ability against Enterococcus faecalis and Porphyromonas gingivalis. After that, we demonstrated that KSL-W@PLGA/collagen (COL)/silk fibroin (SF)/nano-hydroxyapatite (nHA) (COL/SF/nHA) scaffold via 3D-printing technique exhibited significantly good biocompatibility and osteoconductive property. The scaffold was characterized as to pore size, porosity, water absorption expansion rate and mechanical properties. Moreover, MC3T3-E1 cells were seeded into sterile scaffold materials and investigated by CCK-8, SEM and HE staining. In the animal experiment section, we constructed bone defect models of the mandible and evaluated its effect on bone formation. The Japanese white rabbits were killed at 1 and 2 months after surgery, the cone beam computerized tomography (CBCT) and micro-CT scanning, as well as HE and Masson staining analysis were performed on the samples of the operation area, respectively. Data analysis was done using ANOVA and LSD tests. (α = 0.05).ResultsWe observed that the KSL-W@PLGA sustainable-release microspheres prepared in the experiment were uniform in morphology and could gradually release the antimicrobial peptide (KSL-W), which had a long-term antibacterial effect for at least up to 10 days. HE staining and SEM showed that the scaffold had good biocompatibility, which was conducive to the adhesion and proliferation of MC3T3-E1 cells. The porosity and water absorption of the scaffold were (81.96 ± 1.83)% and (458.29 ± 29.79)%, respectively. Histological and radiographic studies showed that the bone healing efficacy of the scaffold was satisfactory.ConclusionsThe KSL-W@PLGA/COL/SF/nHA scaffold possessed good biocompatibility and bone repairing ability, and had potential applications in repairing infected bone defects. Clinical significance The 3D printed scaffold not only has an antibacterial effect, but can also promote bone tissue formation, which provides an alternative therapy option in apical periodontitis.
| S-EPMC9358902 | biostudies-literature
Project description:Burn injury represents a major global public healthcare problem and has a significant health-economics impact. In this study, we report on a 3D printed poly(lactic-co-glycolic acid) (PLGA) dermal scaffold containing bioactive PLGA for burn wound healing. Bioactive brush copolymers containing pendant side chains of PLGA and PEGylated Arg-Gly-Asp tripeptide (RGD) or hyaluronic acid (HA) were synthesized by ring-opening metathesis polymerization (ROMP). These copolymers exhibited good thermal stability for material processing using melt-extrusion-based methods. The copolymers were blended with commercial PLGA, extruded into filaments and 3D printed using fused filament fabrication (FFF) methods with incorporated porosities. The 3D printed scaffolds demonstrated good biocompatibility in in vitro cell assays and in vivo murine models. Porcine study based on partial thickness burn wound model showed that these PLGA scaffolds facilitated re-epithelization with reduced inflammation as compared to the clinical gold standard for second-degree burn wound treatment, Biobrane. The bioactive PLGA scaffolds presented herein are beneficial in wound healing and have therapeutic potential in burn wounds treatment.
| S-EPMC10176610 | biostudies-literature
Project description:Fibroblasts are ubiquitous cells that constitute the stroma of virtually all tissues and play vital roles in homeostasis. The poor innate healing capacity of fibroblastic tissues is attributed to the scarcity of fibroblasts as collagen-producing cells. In this study, we have developed a functional ECM mimicking scaffold that is capable to supply spatial allocation of stem cells as well as anchorage and storage of growth factors (GFs) to direct stem cells differentiate towards fibroblasts. Electrospun PCL fibers were embedded in a PEG-fibrinogen (PF) hydrogel, which was infiltrated with connective tissue growth factor (CTGF) to form the 3D nanocomposite PFP-C. The human induced pluripotent stem cells derived mesenchymal stem cells (hiPS-MSCs) with an advance in growth over adult MSCs were applied to validate the fibrogenic capacity of the 3D nanocomposite scaffold. The PFP-C scaffold was found not only biocompatible with the hiPS-MSCs, but also presented intriguingly strong fibroblastic commitments, to an extent comparable to the positive control, tissue culture plastic surfaces (TCP) timely refreshed with 100% CTGF. The novel scaffold presented not only biomimetic ECM nanostructures for homing stem cells, but also sufficient cell-approachable bio-signaling cues, which may synergistically facilitate the control of stem cell fates for regenerative therapies.
| S-EPMC4329554 | biostudies-literature
Project description:Abdominal aortic aneurysm (AAA) is a permanent, irreversible dilation of the distal region of the aorta. Recent efforts have focused on improved AAA screening and biomechanics-based failure prediction. Idealized and patient-specific AAA phantoms are often employed to validate numerical models and imaging modalities. To produce such phantoms, the investment casting process is frequently used, reconstructing the 3D vessel geometry from computed tomography patient scans. In this study the alternative use of 3D printing to produce phantoms is investigated. The mechanical properties of flexible 3D-printed materials are benchmarked against proven elastomers. We demonstrate the utility of this process with particular application to the emerging imaging modality of ultrasound-based pulse wave imaging, a noninvasive diagnostic methodology being developed to obtain regional vascular wall stiffness properties, differentiating normal and pathologic tissue in vivo. Phantom wall displacements under pulsatile loading conditions were observed, showing good correlation to fluid-structure interaction simulations and regions of peak wall stress predicted by finite element analysis. 3D-printed phantoms show a strong potential to improve medical imaging and computational analysis, potentially helping bridge the gap between experimental and clinical diagnostic tools.
| S-EPMC4981152 | biostudies-literature