Dataset Information

Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni₂Mn_1.5In_0.5 Alloys by First-Principles Calculations.

ABSTRACT: Large magnetic field-induced strains can be achieved in modulated martensite for Ni-Mn-In alloys; however, the metastability of the modulated martensite imposes serious constraints on the ability of these alloys to serve as promising sensor and actuator materials. The phase stability, magnetic properties, and electronic structure of the modulated martensite in the Ni₂Mn_1.5In_0.5 alloy are systematically investigated. Results show that the 6M and 5M martensites are metastable and will eventually transform to the NM martensite with the lowest total energy in the Ni₂Mn_1.5In_0.5 alloy. The physical properties of the incommensurate 7M modulated martensite (7M-IC) and nanotwinned 7M martensite (7M-(52¯)2) are also calculated. The austenite (A) and 7M-(52¯)2 phases are ferromagnetic (FM), whereas the 5M, 6M, and NM martensites are ferrimagnetic (FIM), and the FM coexists with the FIM state in the 7M-IC martensite. The calculated electronic structure demonstrates that the splitting of Jahn-Teller effect and the strong Ni-Mn bonding interaction lead to the enhancement of structural stability.

SUBMITTER: Liang XZ

PROVIDER: S-EPMC9182368 | biostudies-literature | 2022 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni2Mn1.5In0.5 Alloys by First-Principles Calculations.

Liang Xin-Zeng XZ Bai Jing J Guan Zi-Qi ZQ Zhang Yu Y Gu Jiang-Long JL Zhang Yu-Dong YD Esling Claude C Zhao Xiang X Zuo Liang L

Materials (Basel, Switzerland) 20220606 11

Large magnetic field-induced strains can be achieved in modulated martensite for Ni-Mn-In alloys; however, the metastability of the modulated martensite imposes serious constraints on the ability of these alloys to serve as promising sensor and actuator materials. The phase stability, magnetic properties, and electronic structure of the modulated martensite in the Ni2Mn1.5In0.5 alloy are systematically investigated. Results show that the 6M and 5M martensites are ...[more]

PMID: 35683333

Similar Datasets

Project description:The high-voltage LiNi0.5Mn1.5O4 (LNMO) spinel cathode material offers high energy density storage capabilities without the use of costly Co that is prevalent in other Li-ion battery chemistries (e.g., LiNixMnyCozO2 (NMC)). Unfortunately, LNMO-containing batteries suffer from poor cycling performance because of the intrinsically coupled processes of electrolyte oxidation and transition metal dissolution that occurs at high voltage. In this work, we use operando electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies to demonstrate that transition metal dissolution in LNMO is tightly coupled to HF formation (and thus, electrolyte oxidation reactions as detected with operando and in situ solution NMR), indicative of an acid-driven disproportionation reaction that occurs during delithiation (i.e., battery charging). Leveraging the temporal resolution (s-min) of magnetic resonance, we find that the LNMO particles accelerate the rate of LiPF6 decomposition and subsequent Mn2+ dissolution, possibly due to the acidic nature of terminal Mn-OH groups. X-ray photoemission electron microscopy (XPEEM) provides surface-sensitive and localized X-ray absorption spectroscopy (XAS) measurements, in addition to X-ray photoelectron spectroscopy (XPS), that indicate disproportionation is enabled by surface reconstruction upon charging, which leads to surface Mn3+ sites on the LNMO particle surface that can disproportionate into Mn2+(dissolved) and Mn4+(s). During discharge of the battery, we observe high quantities of metal fluorides (in particular, MnF2) in the cathode electrolyte interphase (CEI) on LNMO as well as the conductive carbon additives in the composite. Electronic conductivity measurements indicate that the MnF2 decreases film conductivity by threefold compared to LiF, suggesting that this CEI component may impede both the ionic and electronic properties of the cathode. Ultimately, to prevent transition metal dissolution and the associated side reactions in spinel-type cathodes (particularly those that operate at high voltages like LNMO), the use of electrolytes that offer improved anodic stability and prevent acid byproducts will likely be necessary.

Project description:The main challenge of sodium-ion batteries is cycling stability, which is usually compromised due to strain induced by sodium insertion. Reliable high-voltage cathode materials are needed to compensate the generally lower operating voltages of Na-ion batteries compared to Li-ion ones. Herein, density functional theory (DFT) computations were used to evaluate the thermodynamic, structural, and kinetic properties of the high voltage λ-Mn2O4 and λ-Mn1.5Ni0.5O4 spinel structures as cathode materials for sodium-ion batteries. Determination of the enthalpies of formation reveal the reaction mechanisms (phase separation vs solid solution) during sodiation, while structural analysis underlines the importance of minimizing strain to retain the metastable sodiated phases. For the λ-Mn1.5Ni0.5O4 spinel, a thorough examination of the Mn/Ni cation distribution (dis/ordered variants) was performed. The exact sodiation mechanism was found to be dependent on the transition metal ordering in a similar fashion to the insertion behavior observed in the Li-ion system. The preferred reaction mechanism for the perfectly ordered spinel is phase separation throughout the sodiation range, while in the disordered spinel, the phase separation terminates in the 0.625 < x < 0.875 concentration range and is followed by a solid solution insertion reaction. Na-ion diffusion in the spinel lattice was studied using DFT as well. Energy barriers of 0.3-0.4 eV were predicted for the pure spinel, comparing extremely well with the ones for the Li-ion and being significantly better than the barriers reported for multivalent ions. Additionally, Na-ion macroscopic diffusion through the 8a-16c-8a 3D network was demonstrated via molecular dynamics (MD) simulations. For the λ-Mn1.5Ni0.5O4, MD simulations at 600 K bring forward a normal to inverse spinel half-transformation, common for spinels at high temperatures, showing the contrast in Na-ion diffusion between the normal and inverse lattice. The observed Ni migration to the tetrahedral sites at room temperature MD simulations explains the kinetic limitations experienced experimentally. Therefore, this work provides a detailed understanding of the (de)sodiation mechanisms of high voltage λ-Mn2O4 and λ-Mn1.5Ni0.5O4 spinel structures, which are of potential interest as cathode materials for sodium-ion batteries.

Dataset Information

Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni₂Mn_1.5In_0.5 Alloys by First-Principles Calculations.

Publications

Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni<sub>2</sub>Mn<sub>1.5</sub>In<sub>0.5</sub> Alloys by First-Principles Calculations.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets