Physical and Chemical Compatibilization Treatment with Modified Aminosilanes for Aluminum/Polyamide Adhesion
Ontology highlight
ABSTRACT:
SUBMITTER: Lee B
PROVIDER: S-EPMC9281313 | biostudies-literature | 2022 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Cell penetrating and targeting peptides (CPPs and CTPs) encompass an important class of biochemically active peptides owning the capabilities of targeting and translocating within selected cell types. As such, they have been widely used in the delivery of imaging and therapeutic agents for the diagnosis and treatment of various diseases, especially in cancer. Despite their potential utility, first generation CTPs and CPPs based on the native peptide sequences are limited by poor biological and pharmacological properties, thereby restricting their efficacy. Therefore, medicinal chemistry approaches have been designed and developed to construct related peptidomimetics. Of specific interest herein, are the design applications which modify the polyamide backbone of lead CTPs and CPPs. These modifications aim to improve the biochemical characteristics of the native peptide sequence in order to enhance its diagnostic and therapeutic capabilities. This review will focus on a selected set of cell penetrating and targeting peptides and their related peptidomimetics whose polyamide backbone has been modified in order to improve their applications in cancer detection and treatment.
| S-EPMC7136562 | biostudies-literature
Project description:Nowadays, hybrid polymer/metal assemblies experience a growing demand in the industry, especially for transports and biomedical purposes. Those assemblies offer many advantages, such as lightweight structures and corrosion resistance. The main difficulty to assemble them remains. In this sense, laser welding is more than a promising technique because of its rapidity, the absence of intermediate materials, and its high design freedom. Unfortunately, several fundamental aspects are not well understood yet, as the chemical bonding at the interface. For this work, common materials are studied: polyamide-6.6 and aluminum. A previous published work strongly suggests the formation of a C-O-Al bond at the interface, but this information needs to be confirmed and the reaction mechanism is still uncertain. To achieve this goal, two different model samples were prepared. The first ones are spin-coated layers of polyamide-6.6 on mirror polished aluminum; the other samples are made of a layer of N-methylformamide mimicking the reactive part of the polymer, dip-coated on aluminum. Both sample types were analyzed with XPS and ToF-SIMS and display similar results: C-O-Al bond formation at the interface is confirmed and a reaction mechanism is proposed.
| S-EPMC8674993 | biostudies-literature
Project description:Aluminum powder plays important role in the field of energetic materials. However, it is often vulnerable to oxygen and water due to the high reactivity of aluminum, and it is challenging to build up uniform and passivated coating via existing means. In this work, (Heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane (FAS-17) and glycidyl azide polymer (GAP) were used to coat the surface of high water-reactive aluminum powder (w-Al) to form inactivated w-Al@FAS-17@GAP energetic materials, via the synergy of chemical bonding and physical attraction. Thermal reaction tests showed that the exothermic enthalpy of w-Al@FAS-17@GAP was 5.26 times that of w-Al. Ignition tests showed that w-Al@FAS-17@GAP burnt violently at 760 °C, while w-Al could not be ignited even at 950 °C. In addition, the combined coating of FAS-17 and GAP could effectively improve the hydrophobicity and long-term stability of w-Al, which helped to overcome the poor compatibility of w-Al with explosive components. Our work not only displayed an effective routine to synthesize O2/H2O proof Al energetic materials, but also pointed out a synergistically chemical and physical strategy for constructing intact high-performance surfaces.
| S-EPMC9739710 | biostudies-literature
Project description:In northwest China, the limited amount of water resources are classified mostly as brackish water. Nanofiltration is a widely applied desalination technology used for brackish water treatment; however, membrane fouling restricts its application. Herein, we modified the membrane with triethanolamine (TEOA) and optimized the operating conditions (transmembrane pressure, temperature, and crossflow velocity) to control the nanofiltration membrane fouling by brackish water. Based on the physiochemical characteristics and desalination performance of the prepared membranes, the membrane modified with 2% TEOA (MPCM2) was identified as the optimal membrane, and 0.5 MPa, 25 °C, and 7 cm/s were identified as the optimal operating conditions through a series of nanofiltration experiments. Moreover, the membrane cleaning procedure for fouled MPCM2 was further determined, and a two-step cleaning procedure using ethylene diamine tetraacetic acid disodium followed by HCl with a permeance recovery rate of 98.77% was identified as the optimal cleaning procedure. Furthermore, the characterizations of the fouled and cleaned MPCM2 showed that the optimized cleaning procedure could recover the properties of MPCM2 to near virgin. This study is of great significance for the long-term stable operation of nanofiltration processes in brackish water treatment to ensure the supply of healthy water in the water-deficient areas of northwest China.
| S-EPMC9866803 | biostudies-literature
Project description:The present work highlights the crucial role of the interfacial compatibilization on the design of polylactic acid (PLA)/Magnesium (Mg) composites for bone regeneration applications. In this regard, an amphiphilic poly(ethylene oxide-b-L,L-lactide) diblock copolymer with predefined composition was synthesised and used as a new interface to provide physical interactions between the metallic filler and the biopolymer matrix. This strategy allowed (i) overcoming the PLA/Mg interfacial adhesion weakness and (ii) modulating the composite hydrophilicity, bioactivity and biological behaviour. First, a full study of the influence of the copolymer incorporation on the morphological, wettability, thermal, thermo-mechanical and mechanical properties of PLA/Mg was investigated. Subsequently, the bioactivity was assessed during an in vitro degradation in simulated body fluid (SBF). Finally, biological studies with stem cells were carried out. The results showed an increase of the interfacial adhesion by the formation of a new interphase between the hydrophobic PLA matrix and the hydrophilic Mg filler. This interface stabilization was confirmed by a decrease in the damping factor (tanδ) following the copolymer addition. The latter also proves the beneficial effect of the composite hydrophilicity by selective surface localization of the hydrophilic PEO leading to a significant increase in the protein adsorption. Furthermore, hydroxyapatite was formed in bulk after 8 weeks of immersion in the SBF, suggesting that the bioactivity will be noticeably improved by the addition of the diblock copolymer. This ceramic could react as a natural bonding junction between the designed implant and the fractured bone during osteoregeneration. On the other hand, a slight decrease of the composite mechanical performances was noted.
| S-EPMC8512483 | biostudies-literature
Project description:An aromatic macromolecular polyimide (API) was synthesized and characterized, and used as a synergistic charring flame retardant in glass fiber reinforced polyamide 6 (GF/PA6). API and aluminum diethylphosphinate (ADP) exhibited better flame inhibition behavior and synergistic charring flame retardant behavior compared with ADP alone. The 5%API/7%ADP/GF/PA6 sample achieved the lower peak value of the heat release rate (pk-HRR) at 497 kW/m² and produced higher residue yields of 36.1 wt.%, verifying that API and ADP have an outstanding synergistic effect on the barrier effect. The API/ADP system facilitated the formation of a carbonaceous, phosphorus and aluminum-containing compact char layer with increased barrier effect. FTIR spectra of the residue and real-time TGA-FTIR analysis on the evolved gases from PA6 composites revealed that API interacted with ADP/PA6 and locked in more P⁻O⁻C and P⁻O⁻Ar content, which is the main mechanism for improving flame inhibition and charring ability. In addition, the API/ADP system improved the mechanical properties and corrosion resistance of GF/PA6 composites compared to ADP alone.
| S-EPMC6402001 | biostudies-literature
Project description:The effects of 1-vinyl-3-butyl imidazole chloride (VBIM) on the structure and properties of Polyamide 6 (PA6) were investigated systematically. It was found that PA6/VBIM blends were homogeneous without phase separation. The glass transition temperature (Tg) of PA6 increased with small VBIM loadings followed by the decreasing in Tg with further increasing the amount of VBIM. The crystallization temperature decreased with the addition of VBIM because of the strong interactions between VBIM and the PA6 matrix, as well as the dilution effect when large amounts of VBIM was introduced to the matrix. According to rheological testing, small amounts of VBIM enhanced the storage modulus and melt viscosity of PA6. Tensile tests also show an increase in strength and modulus at relatively low loadings of VBIM. The strength of PA6 with only 1 wt % VBIM improved by 108% compared to that of neat PA6. Fourier transform infrared (FTIR) investigations revealed that the ions of VBIM preferred to form hydrogen bonds with amide groups in PA6. Therefore, VBIM acts as physical connection point for the neighboring PA6 molecular chains. The specific interactions between VBIM and PA6 account not only for the enhanced melt viscosity of PA6, but also for the improved mechanical properties. Moreover, outstanding antistatic property was also observed. The surface resistivity of the sample with 1 wt % VBIM was 1.50 × 1010 Ω/sq, which means good electric dissipation property.
| S-EPMC6415449 | biostudies-literature
Project description:Stable integration of hydrogel implants with host tissues is of critical importance to cartilage tissue engineering. Designing and fabricating hydrogels with high adhesive strength, stability and regeneration potential are major challenges to be overcome. This study fabricated injectable adhesive hyaluronic acid (HA) hydrogel modified by aldehyde groups and methacrylate (AHAMA) on the polysaccharide backbone with multiple anchoring mechanisms (amide bond through the dynamic Schiff base reaction, hydrogen bond and physical interpenetration). AHAMA hydrogel exhibited significantly improved durability and stability within a humid environment (at least 7 days), together with higher adhesive strength (43 KPa to skin and 52 KPa to glass), as compared to commercial fibrin glue (nearly 10 KPa) and HAMA hydrogel (nearly 20 KPa). The results showed that AHAMA hydrogel was biocompatible and could be easily and rapidly prepared in situ. In vitro cell culture experiments showed that AHAMA hydrogel could enhance proliferation (1.2-folds after 3 days) and migration (1.5-folds after 12 h) of bone marrow stem cells (BMSCs), as compared to cells cultured in a culture dish. Furthermore, in a rat osteochondral defect model, implanted AHAMA hydrogel significantly promoted integration between neo-cartilage and host tissues, and significantly improved cartilage regeneration (modified O'Driscoll histological scores of 16.0 ± 4.1 and 18.3 ± 4.6 after 4 and 12-weeks of post-implantation in AHAMA groups respectively, 12.0 ± 2.7 and 12.2 ± 2.8 respectively in HAMA groups, 9.8 ± 2.4 and 11.5 ± 2.1 respectively in untreated groups). Hence, AHAMA hydrogel is a promising adhesive biomaterial for clinical cartilage regeneration and other biomedical applications.
| S-EPMC7708943 | biostudies-literature
Project description:The growing demand for lightweight and durable materials in industries, such as the automotive, aerospace, and electronics industries, has spurred the development of heterojunction bilayer composites, combining the structural integrity of metals with the versatility of polymers. This study addresses the critical interface between stainless steel (SUS) and polyamide 66 (PA66), focusing on the pivotal role of surface treatments and various silane coupling agents in enhancing the adhesion strength of heterojunction SUS/PA66 bilayer composites. Through systematic surface modifications-highlighted by scanning electron microscopy, atomic force microscopy, and contact angle analyses-the study assessed the impact of increasing the surface area, roughness, and energy of SUS. X-ray photoelectron spectroscopy evaluations confirmed the strategic selection of specific silane coupling agents. Although some coupling agents barely influenced the mechanics, notably, aminopropyl triethoxysilane (A1S) and 3-glycidyl oxypropyl trimethoxysilane (ES) significantly enhanced the mechanical properties of the heterojunction bilayer composites, evidenced by the improved lap shear strength, elongation at break, and toughness. These advancements were attributed to the interfacial interactions at the metal-polymer interface. This research underscored the significance of targeted surface treatment and the judicious selection of coupling agents in optimizing the interfacial adhesion and overall performance of metal-polymer composites, offering valuable insights for the fabrication of materials where reduced weight and enhanced durability are paramount.
| S-EPMC11013711 | biostudies-literature
Project description:Two new molecular structures, namely 1,3-bis(trimethylsilyl)-1H-benzimidazole-2(3H)-thione, C13H22N2SSi2, (2), and 1-trimethylsilyl-1H-benzimidazole-2(3H)-thione, C10H14N2SSi, (3), are reported. Both systems were derived from 1H-benzimidazole-2(3H)-thione. Noncovalent C-H···π interactions between the centroid of the benzmidazole system and the SiMe3 groups form helicoidal arrangements in (2). Dimerization of (3) results in the formation of R2(2)(8) rings via N-H···S interactions, along with parallel π-π interactions between imidazole and benzene rings.
| S-EPMC4554437 | biostudies-literature