Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preferential Electroreduction at the Oil|Water|Conductor Interface.

ABSTRACT: Chemistry in confined volumes, such as aqueous droplets, is different from bulk, continuous water. However, few techniques are available to probe interfacial reactivity in complex, multiphase environments. Here, we demonstrate preferential electroreduction at the oil|water|conductor (three-phase) interface. Electrodeposition of cobalt and nickel results in ringlike structures that can be characterized with tens of nanometers precision in scanning electron microscopy and energy dispersive X-ray spectroscopy. To demonstrate the generalizability of these observations, we show that electroreduction of resazurin to fluorescent resorufin occurs preferentially at the three-phase boundary. The preferential electroreduction does not depend on droplet geometry. These results, grounded in three-phase boundary reactivity, are highly important across all fields of chemistry and biology because they highlight how the interface can change chemistry in unexpected ways.

SUBMITTER: Clarke TB

PROVIDER: S-EPMC9287842 | biostudies-literature | 2022 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preferential Electroreduction at the Oil|Water|Conductor Interface.

Clarke Thomas B TB Dick Jeffrey E JE

The journal of physical chemistry letters 20220408 15

Chemistry in confined volumes, such as aqueous droplets, is different from bulk, continuous water. However, few techniques are available to probe interfacial reactivity in complex, multiphase environments. Here, we demonstrate preferential electroreduction at the oil|water|conductor (three-phase) interface. Electrodeposition of cobalt and nickel results in ringlike structures that can be characterized with tens of nanometers precision in scanning electron microscopy and energy dispersive X-ray s ...[more]

PMID: 35394768

Similar Datasets

Ordered polyelectrolyte assembly at the oil-water interface.

Project description:Polyelectrolytes (PEs) are widely used in applications such as water purification, wastewater treatment, and mineral recovery. Although much has been learned in past decades about the behavior of PEs in bulk aqueous solutions, their molecular behavior at a surface, and particularly an oil-water interface where many of their applications are most relevant, is largely unknown. From these surface spectroscopic and thermodynamics studies we report the unique molecular characteristics that several common polyelectrolytes, poly(acrylic acid) and poly(methylacrylic acid), exhibit when they adsorb at a fluid interface between water and a simple insoluble organic oil. These PEs are found to adsorb to the interface from aqueous solution in a multistepped process with a very thin initial layer of oriented polymer followed by multiple layers of randomly oriented polymer. This additional layering is thwarted when the PE conformation is constrained. The adsorption/desorption process is highly pH dependent and distinctly different than what might be expected from bulk aqueous phase behavior.

| S-EPMC3295288 | biostudies-literature

Langmuir films at the oil/water interface revisited.

Project description:We studied monomolecular layers at the oil/water interface (O/Wint) in a Langmuir interfacial trough using egg-yolk phosphatidylcholine (EPC) (the model phospholipid) and Vaseline (VAS) as oil phase. The temporal dynamics in the surface pressure (π) evolution depended on the method (spreading/adsorption) used for monolayers preparation and reflected the different distribution of EPC between all the system compartments (bulk phases and interfaces). We distinguished between EPC located either stable at the interface or hopping between the interface and bulk phases. The size order of the apparent mean molecular area, at constant π, of EPC at different interfaces (EPCO/W > EPC/VAS0.02;A/W > EPCA/W), suggested that VAS molecules intercalated between the hydrocarbon chains of EPCO/W, at a molar fraction xVAS > 0.02. However, EPC/VAS0.02;A/W showed the highest compressional free energy. This leaded us to study the EPC/VAS0.02 mixture at A/W by Brewster Angle Microscopy (BAM), finding that upon compression VAS segregated over the monolayer, forming non-coalescent lenses (as predicted by the spreading coefficient S = -13 mN/m) that remained after decompression and whose height changed (increase/decrease) accompanied the compression/decompression cycle. At the O/Wint, while some VAS molecules remained at the interface up to the collapse, others squeezed out towards the VAS bulk phase with an energy requirement lower than towards the air.

| S-EPMC6381208 | biostudies-literature

Interfacial solute flux promotes emulsification at the water|oil interface.

Project description:Emulsions are critical across a broad spectrum of industries. Unfortunately, emulsification requires a significant driving force for droplet dispersion. Here, we demonstrate a mechanism of spontaneous droplet formation (emulsification), where the interfacial solute flux promotes droplet formation at the liquid-liquid interface when a phase transfer agent is present. We have termed this phenomenon fluxification. For example, when HAuCl4 is dissolved in an aqueous phase and [NBu4][ClO4] is dissolved in an oil phase, emulsion droplets (both water-in-oil and oil-in-water) can be observed at the interface for various oil phases (1,2-dichloroethane, dichloromethane, chloroform, and nitrobenzene). Emulsification occurs when AuCl4- interacts with NBu4+, a well-known phase-transfer agent, and transfers into the oil phase while ClO4- transfers into the aqueous phase to maintain electroneutrality. The phase transfer of SCN- and Fe(CN)63- also produce droplets. We propose a microscopic mechanism of droplet formation and discuss design principles by tuning experimental parameters.

| S-EPMC9911786 | biostudies-literature

Chemical Analysis of a "Miller-Type" Complex Prebiotic Broth : Part II: Gas, Oil, Water and the Oil/Water-Interface.

Project description:We have analyzed the chemical variety obtained by Miller-Urey-type experiments using nuclear magnetic resonance (NMR) spectroscopy and coherent anti-Stokes Raman scattering (CARS) spectroscopy, gas chromatography followed by mass spectrometry (GC/MS) and two-dimensional gas chromatography followed by mass spectrometry (GCxGC/MS). In the course of a running Miller-Urey-type experiment, a hydrophobic organic layer emerged besides the hydrophilic aqueous phase and the gaseous phase that were initially present. The gas phase mainly consisted of aromatic compounds and molecules containing C≡C or C≡N triple bonds. The hydrophilic phase contained at least a few thousands of different molecules, primarily distributed in a range of 50 and 500 Da. The hydrophobic phase is characterized by carbon-rich, oil-like compounds and their amphiphilic derivatives containing oxygen with tensioactive properties. The presence of a wide range of oxidized molecules hints to the availability of oxygen radicals. We suggest that they intervene in the formation of alkylated polyethylene glycol (PEG) in the oil/water interface. CARS spectroscopy revealed distinct vibrational molecular signatures. In particular, characteristic spectral bands for cyanide compounds were observed if the broth was prepared with electric discharges in the gaseous phase. The characteristic spectral bands were absent if discharges were released onto the water surface. NMR spectroscopy on the same set of samples independently confirmed the observation. In addition, NMR spectroscopy revealed overall high chemical variability that suggests strong non-linearities due to interdependent, sequential reaction steps.

| S-EPMC5705758 | biostudies-literature

Compound jetting from bubble bursting at an air-oil-water interface.

Project description:Bursting of bubbles at a liquid surface is ubiquitous in a wide range of physical, biological, and geological phenomena, as a key source of aerosol droplets for mass transport across the interface. However, how a structurally complex interface, widely present in nature, mediates the bursting process remains largely unknown. Here, we document the bubble-bursting jet dynamics at an oil-covered aqueous surface, which typifies the sea surface microlayer as well as an oil spill on the ocean. The jet tip radius and velocity are altered with even a thin oil layer, and oily aerosol droplets are produced. We provide evidence that the coupling of oil spreading and cavity collapse dynamics results in a multi-phase jet and the follow-up droplet size change. The oil spreading influences the effective viscous damping, and scaling laws are proposed to quantify the jetting dynamics. Our study not only advances the fundamental understanding of bubble bursting dynamics, but also may shed light on the airborne transmission of organic matters in nature related to aerosol production.

| S-EPMC8563946 | biostudies-literature

Ultrasound-Induced Adsorption of Acousto-Responsive Microgels at Water-Oil Interface.

Project description:Ultrasonic mixing is a well-established method to disperse and mix substances. However, the effects of ultrasound on dispersed soft particles as well as on their adsorption kinetics at interfaces remain unexplored. Ultrasound not only accelerates the movement of particles via acoustic streaming, but recent research indicates that it can also manipulate the interaction of soft particles with the surrounding liquid. In this study, it evaluates the adsorption kinetics of microgel at the water-oil interface under the influence of ultrasound. It quantifies how acoustic streaming accelerates the reduction of interfacial tension. It uses high-frequency and low-amplitude ultrasound, which has no destructive effects. Furthermore, it discusses the ultrasound-induced shrinking and thus interfacial rearrangement of the microgels, which plays a secondary but non-negligible role on interfacial tension reduction. It shows that the decrease in interfacial tension due to the acoustic streaming is stronger for microgels with higher cross-linker density. Moreover, it shows that ultrasound can induce a reversible decrease in interfacial tension due to the shrinkage of microgels at the interface. The presented results may lead to a better understanding in any field where ultrasonic waves meet soft particles, e.g., controlled destabilization in foams and emulsions or systems for drug release.

| S-EPMC10837341 | biostudies-literature

Voltage-driven ion flux promotes emulsification at the water|oil interface.

Project description:Emulsions are critical across a vast range of industries. Generally, emulsion synthesis is a complicated chemical process, requiring many mixed-phase systems. Here, we demonstrate that the flux of ions across the oil|water interface induces emulsification. Ion flux is achieved by a voltage-driven process, where an anode and a cathode are placed in each phase. When a current density of 2 mA cm-2 is reached across the interface, emulsification occurs. We demonstrate that emulsification can be tuned to occur in both phases, depending on the ions present. Droplet sizes are on the order of hundreds of nm and are stable for over an hour even without purposefully added surfactant. We demonstrate qualitative control over droplet size and charge based on salt content, current densities, and polarity of the interface. The process is 1000 times less energetic than ultrasonication. Our results introduce a robust and low-energy means of nanodroplet dispersion without the use of more than two phases and complex phase-transfer agents.

| S-EPMC10914326 | biostudies-literature

Transition Behaviors of Configurations of Colloidal Particles at a Curved Oil-Water Interface.

Project description:We studied the transition behaviors of colloidal arrangements confined at a centro-symmetrically curved oil-water interface. We found that assemblies composed of several colloidal particles at the curved interface exhibit at least two unique patterns that can be attributed to two factors: heterogeneity of single-colloid self-potential and assembly kinetics. The presence of the two assembly structures indicates that an essential energy barrier between the two structures exists and that one of the structures is kinetically stable. This energy barrier can be overcome via external stimuli (e.g., convection and an optical force), leading to dynamic transitions of the assembly patterns.

| S-EPMC5456683 | biostudies-other

Two-Dimensional Graphene-Based Potassium Channels Built at an Oil/Water Interface.

Project description:Graphene-based laminar membranes exhibit remarkable ion sieving properties, but their monovalent ion selectivity is still low and much less than the natural ion channels. Inspired by the elementary structure/function relationships of biological ion channels embedded in biomembranes, a new strategy is proposed herein to mimic biological K+ channels by using the graphene laminar membrane (GLM) composed of two-dimensional (2D) angstrom(Å)-scale channels to support a simple model of semi-biomembrane, namely oil/water (O/W) interface. It is found that K+ is strongly preferred over Na+ and Li+ for transferring across the GLM-supported water/1,2-dichloroethane (W/DCE) interface within the same potential window (-0.1-0.6 V), although the monovalent ion selectivity of GLM under the aqueous solution is still low (K+/Na+~1.11 and K+/Li+~1.35). Moreover, the voltammetric responses corresponding to the ion transfer of NH4+ observed at the GLM-supported W/DCE interface also show that NH4+ can often pass through the biological K+ channels due to their comparable hydration-free energies and cation-π interactions. The underlying mechanism of as-observed K+ selective voltammetric responses is discussed and found to be consistent with the energy balance of cationic partial-dehydration (energetic costs) and cation-π interaction (energetic gains) as involved in biological K+ channels.

| S-EPMC10419551 | biostudies-literature

Effect of Surfactants on the Molecular Structure of the Buried Oil/Water Interface.

Project description:The oil/water interface, for instance in emulsions, is often stabilized by surfactants. Hence, the co-existence of oil, water, and surfactant molecules at the buried oil/water interface determines macroscopic properties such as surface tension or emulsion stability. Utilizing an inherently surface sensitive spectroscopic method, sum frequency generation (SFG) spectroscopy, we show that adsorption of an anionic surfactant to the buried oil/water interface increases the magnitude of the interfacial electric field. Meanwhile, the degree of ordering of the interfacial oil molecules increases with the surfactant concentration owing to the intercalation of aliphatic chains of interfacial oil and surfactant molecules. At sufficiently high surfactant concentrations, the interfacial charge reaches a maximum value and the interfacial oil molecules arrange in a fully ordered conformation, a state which coincides with the significant decrease in interfacial tension and increased emulsion stability.

| S-EPMC9293143 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data