Dataset Information

Application of one-third tubular steel plates and screws for fixation of medial column in pilon fractures.

ABSTRACT:

Background

The present study sought to explore the efficacy of one-third tubular steel plates and screws for the treatment of medial column of pilon fractures.

Methods

The present retrospective study comprised 40 subjects with Rüedi-Allgöwer type III pilon fractures that attended Northern Jiangsu People's Hospital from April 2016 to April 2019. Patients were assigned to 2 groups based on reconstruction and fixation components used on the medial column. The medial column of participants in the control group (n=20) was anchored using screws. The medial column for subjects in the treatment group (n=20) was reconstructed using a one-third tubular steel plate. The American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score at 1, 2, 3, 6, 12 and 24 months after operation, intraoperative blood loss, fracture healing time, preoperative detumescence duration, operation time, postoperative weightbearing duration, and postoperative Burwell-Charnley radiological score of the 2 groups were compared.

Results

The findings showed that intraoperative blood loss, preoperative detumescence time, and operation time for the treatment group were not statistically different relative to the control group (P>0.05). The fracture healing time and postoperative weightbearing time in the treatment group were 15.07±0.98 weeks and 6.91±0.61 weeks, respectively, while those in the control group were 15.84±0.59 weeks and 8.60±0.53 weeks, respectively (P<0.05). Patients in the treatment group showed markedly higher AOFAS scores relative to the AOFAS scores of subjects in the control group at month 1, 2, and 3 post-operation (P<0.05). AOFAS scores for the 2 groups were not significantly different at month 6, 12 and 24 post-operation. Subjects in the control group had a significantly lower Burwell-Charnley number radiology score relative to that of subjects in the treatment group (P<0.05).

Conclusions

The present findings show that the medial column of subjects with Rüedi-Allgöwer type III pilon fracture can be repaired using a one-third tubular steel plate. Compared with simple screw fixation, the use of a one-third tubular steel plate allows earlier postoperative weightbearing, decreases the rate of postoperative reduction loss, and leads to better clinical effects and prognosis.

SUBMITTER: Wang Z

PROVIDER: S-EPMC9347046 | biostudies-literature | 2022 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Application of one-third tubular steel plates and screws for fixation of medial column in pilon fractures.

Wang Zhuo Z Zhang Jian J He Jin-Shan JS Gao Hong-Wei HW Chen Peng-Tao PT Zhou Yue-Lai YL Fang Yong-Chao YC Lu Yao Y Hu Le L

Annals of translational medicine 20220501 9

<h4>Background</h4>The present study sought to explore the efficacy of one-third tubular steel plates and screws for the treatment of medial column of pilon fractures.<h4>Methods</h4>The present retrospective study comprised 40 subjects with Rüedi-Allgöwer type III pilon fractures that attended Northern Jiangsu People's Hospital from April 2016 to April 2019. Patients were assigned to 2 groups based on reconstruction and fixation components used on the medial column. The medial column of partici ...[more]

PMID: 35928750

Similar Datasets

Project description:BackgroundAngular stable plates were introduced two decades ago as a promising treatment for fixation of displaced fractures of the proximal humerus (PHF). However, high rates of adverse events and reoperations have been reported. One frequent reason is secondary penetration of screws into the glenohumeral joint, due to sinking of the fracture or avascular head necrosis. To prevent joint penetrations angular stable plates with smooth locking pegs instead of locking screws have been developed. The aim of the present study was to investigate whether blunt pegs instead of pointed screws reduced the risk of secondary penetration into the glenohumeral joint during fracture healing after operatively treated PHFs.MethodsFrom two different patient cohorts with displaced PHFs (60 treated with PHILOS plate with screws and 50 with ALPS-PHP plate with pegs), two groups were matched according to fracture type AO/OTA 11-B2 and 11-C2 and age (55-85 years). They were followed up at 3, 6 and 12 months. Primary outcome was radiographic signs of peg or screw penetrations into the glenohumeral joint at 12 months. Secondary outcomes were Oxford shoulder score (OSS) and Constant Score (CS) and radiographic signs of avascular humeral head necrosis (AVN).ResultsEighteen PHILOS patients with B2 and C2 fractures could be matched with a corresponding group of 18 operated with ALPS-PHP with pegs. The number of penetrations of pegs and screws were equal between the two groups and the development of avascular head necrosis did not differ either. The functional outcomes for both OSS and CS at 12 months was clearly in favor of patients without joint penetrations in both groups.ConclusionWe found no differences in the number of screw or peg penetrations in the PHILOS and ALPS-PHP group and the occurrence of AVN was equal. Joint penetrations led to inferior functional outcomes at 1 year. The ClinicalTrials.gov identifier 20/11/12 prospectively for the Philos Group is NCT01737060, and for the ALPS group 11/03/20 retrospectively is NCT04622852.

Project description:Open reduction and internal fixation of pelvic acetabular fractures are challenging due to the limited surgical exposure from surrounding abdominal tissue. There have been a number of recent trials using metallic 3D-printed pelvic fracture plates to simplify and improve various elements of these fracture fixation surgeries; however, the amount of time and accuracy involved in the design and implantation of customised plates have not been well characterised. This study recorded the amount of time related to the design, manufacture and implantation of six customised fracture plates for five cadaveric pelvic specimens with acetabular fracture, while manufacturing, and surgical accuracy was calculated from computed tomography imaging. Five of the fracture plates were designed within 9.5 h, while the plate for a pelvis with a pre-existing fracture plate took considerably longer (20.2 h). Manufacturing comprised 3D-printing the plates in Ti6Al4V with a sintered laser melting (SLM) 3D-printer and post-processing (heat treatment, smoothing, tapping threads). The manufacturing times varied from 27.0 to 32.5 h, with longer times related to machining a thread for locking-head screws with a multi-axis computer numerical control (CNC) mill. For the surface of the plate in contact with the bone, the root-mean-square errors of the print varied from 0.10 to 0.49 mm. The upper range of these errors was likely the result of plate designs that were relatively long with thin cross-sections, a combination that gives rise to high thermal stresses when using a SLM 3D-printer. A number of approaches were explored to control the trajectories of locking or non-locking head screws including guides, printed threads or hand-taps; however, the plate with CNC-machined threads was clearly the most accurate with screw angulation errors of 2.77° (range 1.05-6.34°). The implanted position of the plates was determined visually; however, the limited surgical exposure and lack of intra-operative fluoroscopy in the laboratory led to high inaccuracies (translational errors of 1.74-13.00 mm). Plate mal-positioning would lead to increased risk of surgical injury due to misplaced screws; hence, it is recommended that technologies that can control plate positioning such as fluoroscopy or alignment guides need to be implemented into customised plate design and implantation workflow. Due to the plate misalignment and the severe nature of some acetabular fractures comprising numerous small bone fragments, the acetabular reduction exceeded the clinical limit of 2 mm for three pelvises. Although our results indicate that customised plates are unsuitable for acetabular fractures comprising six or more fragments, confirmation of this finding with a greater number of specimens is recommended. The times, accuracy and suggested improvements in the current study may be used to guide future workflows aimed at producing customised pelvic fracture plates for greater numbers of patients.

Project description:BackgroundTo explore the application and clinical efficacy of surgical approach strategies in open reduction internal fixation of closed complex tibial Pilon fractures based on axial CT scans.MethodsThis retrospective cohort study included data of 25 patients with closed complex tibial Pilon fractures treated from October 2011 to March 2014, including 19 males and 6 females aged 18-54 years (average 39.5 years). According to classification criteria of the Association for Osteosynthesis/Orthopedic Trauma Association (AO/OTA), 4 patients were type 43C1, 10 type 43C2, and 11 type 43C3. Surgical approaches were selected based on fracture line distribution and bone displacement revealed by axial CT scans, and an open reduction method was adopted for internal fixation of the bone plates. Postoperatively, Burwell-Charnley radiographic criteria were used to determine fracture reduction quality. Functional evaluation was performed using the American Orthopedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Scale. Complications, fracture union time, and the AOFAS scores at last follow-up were recorded.ResultsThe 25 included patients were followed for 22-60 months postoperatively (average follow-up 33.9 months). Of these, 19 patients achieved anatomical reduction of the articular surface, 5 achieved good reduction, and one achieved fair reduction. Two patients developed superficial infection on the anteromedial incision and delayed union but recovered well after local dressing change and oral administration of antibiotics. Another patient developed deep infection on the anterolateral incision, which was controlled by debridement, catheter irrigation, and intravenous antibiotic injection. All fractures healed well and average union time was 2.8 months (range, 2-3 months). No fracture malunion or internal fixation failures were found at last follow-up. All 25 patients had AOFAS scores ranging from 80 to 100 at last follow-up (average 88.4). Overall, 15 patients were excellent, 10 good, and 0 fair or poor, with excellent and good rates of 100%.ConclusionsSurgical approach strategies for complex tibial Pilon fractures based on axial CT scans accurately reconstruct the articular surface and achieve solid internal fixation of assembled locking plates, while early postoperative functional exercises contribute to the functional recovery of affected limbs and reduce related complications.

Project description:BackgroundMandibular fractures constitute about 80.79% of maxillofacial injuries in Alexandria University, either as isolated mandibular fractures or as a part of panfacial fractures. The combination of symphyseal and parasymphyseal fractures represent 47.09% of the total mandibular fractures.AimTo compare the effectiveness of lag screws vs double Y-shaped miniplates in the fixation of anterior mandibular fractures.MethodsThis study is a prospective randomized controlled clinical trial, performed on sixteen patients with anterior mandibular fractures. Patients were divided equally into two groups, each consisting of eight patients. Group 1: Underwent open reduction and internal fixation using two lag screws. Group 2: Underwent open reduction and internal fixation using double Y-shaped plates. The following parameters were assessed: operating time in minutes, pain using a visual analog scale, edema, surgical wound healing for signs and symptoms of infection, occlusion status and stability, maximal mouth opening, and sensory nerve function. Cone beam computed tomography was performed at 3 and 6 mo to measure bone density and assess the progression of fracture healing.ResultsThe study included 13 males (81.3%) and 3 females (18.8%) aged 26 to 45 years (mean age was 35.69 ± 6.01 years). The cause of trauma was road traffic accidents in 10 patients (62.5%), interpersonal violence in 3 patients (18.8%) and other causes in 3 patients (18.8%). The fractures comprised 10 parasymphyseal fractures (62.5%) and 6 symphyseal fractures (37.5%). The values of all parameters were comparable in both groups with no statistically significant difference except for the mean bone density at 3 mo postoperatively which was 946.38 ± 66.29 in group 1 and 830.36 ± 95.53 in group 2 (P = 0.015).ConclusionBoth lag screws and double Y-shaped miniplates provide favorable means of fixation for mandibular fractures in the anterior region. Fractures fixed with lag screws show greater mean bone density at 3 mo post-operation, indicative of higher primary stability and faster early bone healing. Further studies with larger sample sizes are required to verify these conclusions.

Dataset Information

Application of one-third tubular steel plates and screws for fixation of medial column in pilon fractures.

Background

Methods

Results

Conclusions

Publications

Application of one-third tubular steel plates and screws for fixation of medial column in pilon fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets