Dataset Information

Mycosynthesis of Hematite (α-Fe₂O₃) Nanoparticles Using Aspergillus niger and Their Antimicrobial and Photocatalytic Activities.

ABSTRACT: Nanoparticles (NPs) and nanomaterials (NMs) are now widely used in a variety of applications, including medicine, solar energy, drug delivery, water treatment, and pollution detection. Hematite (α-Fe₂O₃) nanoparticles (Hem-NPs) were manufactured in this work by utilizing a cost-effective and ecofriendly approach that included a biomass filtrate of A. niger AH1 as a bio-reducer. The structural and optical properties of Hem-NPs were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV-visible and Fourier-transform infrared (FTIR) spectroscopies. The results revealed that all of the studied parameters, as well as their interactions, had a significant impact on the crystallite size. The average diameter size of the biosynthesized Hem-NPs ranged between 60 and 80 nm. The antimicrobial and photocatalytic activities of Hem-NPs were investigated. The antimicrobial results of Hem-NPs revealed that Hem-NPs exhibited antibacterial activity against E. coli, B. subtilis, and S. mutans with MICs of 125, 31.25, and 15.62 µg/mL, respectively. Moreover, Hem-NPs exhibited antifungal activity against C. albicans and A. fumigatus, where the MICs were 2000 and 62.5 µg/mL, respectively. The efficiency of biosynthesized Hem-NPs was determined for the rapid biodegradation of crystal violet (CV) dye, reaching up to 97 percent after 150 min. Furthermore, Hem-NPs were successfully used more than once for biodegradation and that was regarded as its efficacy. In conclusion, Hem-NPs were successfully biosynthesized using A. niger AH1 and demonstrated both antimicrobial activity and photocatalytic activity against CV dye.

SUBMITTER: Saied E

PROVIDER: S-EPMC9404788 | biostudies-literature | 2022 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

RETRACTED: Mycosynthesis of Hematite (α-Fe2O3) Nanoparticles Using Aspergillus niger and Their Antimicrobial and Photocatalytic Activities.

Saied Ebrahim E Salem Salem S SS Al-Askar Abdulaziz A AA Elkady Fathy M FM Arishi Amr A AA Hashem Amr H AH

Bioengineering (Basel, Switzerland) 20220817 8

Nanoparticles (NPs) and nanomaterials (NMs) are now widely used in a variety of applications, including medicine, solar energy, drug delivery, water treatment, and pollution detection. Hematite (α-Fe2O3) nanoparticles (Hem-NPs) were manufactured in this work by utilizing a cost-effective and ecofriendly approach that included a biomass filtrate of A. niger AH1 as a bio-reducer. The structural and optical properties of Hem-NPs were investigated using X-ray diffraction ...[more]

PMID: 36004922

Similar Datasets

Project description:BackgroundMycosynthesis of silver nanoparticles (SNPs) offers a safe, eco-friendly, and promising alternative technique for large-scale manufacturing. Our study might be the first report that uses mycelial filtrate of an endophytic fungus, Aspergillus flavipes, for SNPs production under optimal conditions as an antimicrobial agent against clinical multidrug-resistant (MDR) wound pathogens.ResultsIn the present study, among four different endophytic fungi isolated from leaves of Lycium shawii, the only one isolate that has the ability to mycosynthesize SNPs has been identified for the first time as Aspergillus flavipes AUMC 15772 and deposited in Genebank under the accession number OP521771. One variable at a time (OVAT) and Plackett Burman design (PBD) were conducted for enhancing the production of mycosynthesized SNPs (Myco-SNPs) through optimization using five independent variables. The overall optimal variables for increasing the mycosynthesis of SNPs from mycelial filtrate of A. flavipes as a novel endophytic fungus were a silver nitrate concentration of 2 mM, a pH of 7.0, an incubation time of 5 days, and a mycelial filtrate concentration of 30% in dark conditions. UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), X-ray spectroscopy (XRD), Transmission electron microscopy (TEM), and Selected-Area Electron Diffraction (SAED) patterns were used to characterize Myco-SNPs, which showed the peak of absorbance at 420 nm, and FTIR showed the bands at 3426.44, 2923.30, 1681.85, 1552.64, and 1023.02 cm-1, respectively, which illustrated the presence of polyphenols, hydroxyl, alkene, nitro compounds, and aliphatic amines, respectively. The XRD pattern revealed the formation of Myco-SNPs with good crystal quality at 2θ = 34.23° and 38.18°. The TEM image and SAED pattern show the spherical crystalline shape of Myco-SNPs with an average size of 6.9232 nm. High antibacterial activity of Myco-SNPs was recorded against MDR wound pathogens as studied by minimum inhibitory concentrations ranging from 8 to 32 µg/mL, time kill kinetics, and post-agent effects. Also, in vitro cell tests indicated that Myco-SNPs support the cell viability of human skin fibroblast cells as a nontoxic compound.ConclusionThe obtained results revealed the successful production of Myco-SNPs using the mycelial filtrate of A. flavipes, which may be a promising nontoxic alternative candidate for combating MDR wound pathogens.

Project description:Hematite (α-Fe2O3) emerges as an enticing material for visible-light-driven photocatalysis owing to its remarkable stability, low toxicity, and abundance. However, its inherent shortcomings, such as a short hole diffusion length and high recombination rate, hinder its practical application. Recently, oxygen vacancies (Vo) within hematite have been demonstrated to modulate its photocatalytic attributes. The effects of Vo can be broadly categorized into two opposing aspects: (1) acting as electron donors, enhancing carrier conductivity, and improving photocatalytic performance and (2) acting as surface carrier traps, accelerating excited carrier recombination, and deteriorating performance. Critically, the generation rate, distribution, role, and behavior of Vo significantly differ for synthesis methods due to differences in formation mechanisms and oxygen diffusion. This complexity hampers simplified discussions of Vo, necessitating careful investigation and nuanced discussion tailored to the specific method and conditions employed. Among various approaches, hydrothermal synthesis offers a simple and cost-effective route. Here, we demonstrate a hydrothermal synthesis method for Vo introduction to hematite using a carbon source, where variations in the heating rate have not been previously explored in terms of their influence on Vo generation. The analyses revealed that the concentration of Vo was maximized at a heating rate of 16 °C/min, indicative of a high density of surface defects. With regard to photocatalytic performance, elevated heating rates (16 °C/min) fostered the formation of Vo primarily on the hematite surface. The photocatalytic activity was 7.1 times greater than that of the sample prepared at a low heating rate (2 °C/min). These findings highlight the crucial role of surface defects, as opposed to bulk defects, in promoting hematite photocatalysis. Furthermore, the facile control over Vo concentration achievable via manipulating the heating rate underscores the promising potential of this approach for optimizing hematite photocatalysts.

Project description:ObjectivesAt the present time, there is a persistent need to get rid of environmental contaminants by eco-friendly, sustainable, and economical technologies. Uncontrolled disposal practices of domestic and industrial solid and liquid wastes led to water pollution which has negative impacts on public health, environment, and socio-economic development. Several water-borne diseases are spreading man to man by microorganisms such as pathogenic bacteria. For the protection of water bodies, all wastewater from various sources should be managed and remediated properly. Myco-remediation is a form of bioremediation in which fungi are used to get rid of contaminants. Fungi are attractive agents for the biosynthesis of nanoparticles especially silver nanoparticles (AgNPs) which are considered one of the most widely utilized nanoparticles because of their unique characteristics such as antibacterial, antiviral, antifungal, and anti-inflammatory properties.MethodsThis study uses silver nitrate and supernatants of four marine fungi; Penicillium simplicissimum, Aspergillus terreus, Aspergillus japonicus, and Aspergillus oryzae for extracellular biosynthesis of silver nanoparticles and to evaluate its activity against different pathogenic microorganisms. These nanoparticles may subsequently be applied for the treatment or nano-bioremediation of microbial contaminants in water bodies and improve water quality.ResultsSilver nanoparticles were synthesized and the results revealed that spherical and well-dispersed nanoparticles of different sizes were formed with sizes ranging between 3.8 and 23 nm. Characterization results approved the existence of stable nanocrystalline elemental silver. Antibacterial activity results revealed that AgNPs can be used as a powerful antimicrobial agent for several pathogenic bacteria, yeast, and fungi. Among the biosynthesized NPs mediated by the four marine fungi, AgNPs mediated by A. japonicus (5 mM) had the highest antibacterial activity, while AgNPs mediated by Penicillium simplicissmum (8 mM) had the highest antifungal activity.ConclusionMarine fungi can biosynthesize stable AgNPs that exhibit potent antimicrobial activity against a variety of pathogens.

Dataset Information

Mycosynthesis of Hematite (α-Fe₂O₃) Nanoparticles Using Aspergillus niger and Their Antimicrobial and Photocatalytic Activities.

Publications

RETRACTED: Mycosynthesis of Hematite (α-Fe<sub>2</sub>O<sub>3</sub>) Nanoparticles Using <i>Aspergillus niger</i> and Their Antimicrobial and Photocatalytic Activities.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets