Dataset Information

Magnetic CuFe₂O₄ Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage.

ABSTRACT: This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe₂O₄ nanoparticles in negative potential range are reported, suggesting that CuFe₂O₄ is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm^-2 is achieved at a low electrode resistance in a relatively large potential window of 0.8 V. The cyclic voltammograms and galvanostatic charge-discharge data show nearly ideal pseudocapacitive behavior. Good electrochemical performance is achieved at a high active mass loading due to the use of chelating molecules of ammonium salt of purpuric acid (ASPA) as a co-dispersant for CuFe₂O₄ nanoparticles and conductive multiwalled carbon nanotube (MCNT) additives. The adsorption of ASPA on different materials is linked to structural features of ASPA, which allows for different interaction and adsorption mechanisms. The combination of advanced magnetic and pseudocapacitive properties in a negative potential range in a single MOPC material provides a platform for various effects related to the influence of pseudocapacitive/magnetic properties on magnetic/pseudocapacitive behavior.

SUBMITTER: Liang W

PROVIDER: S-EPMC9413230 | biostudies-literature | 2022 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Magnetic CuFe2O4 Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage.

Liang Wenyu W Yang Wenjuan W Sakib Sadman S Zhitomirsky Igor I

Molecules (Basel, Switzerland) 20220820 16

This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe2O4 nanoparticles in negative potential range are reported, suggesting that CuFe2O4 is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm-2 is achieve ...[more]

PMID: 36014550

Similar Datasets

Project description:In present study, we have synthesized intrinsically conductive poly(1,6-heptadiynes) via cyclopolymerization technique, and further it is composited with the NiFe2O4 to fabricate pellet for electrical and electronic applications. The synthesized polymer I-V characteristics were obtained by two-probe measurement technique. The results suggest that the high current density of the synthesized polymer was in the range of 1.2 × 10-5-3.1 × 10-5 S/cm, which attributes to the potentially induced hoping charge-carrier mechanism within the conjugated poly(1,6-heptadiynes). NiFe2O4 and NiFe2O4/poly(1,6-heptadiynes) composite pellets were fabricated by utilizing hydraulic pelletizer. The sample's electrical measurements were performed via broad-band dielectric impedance spectroscopy, wherein the composite permittivity was about ε = 45 (100 Hz to 10 kHz), which attributes to the NiFe2O4 and poly(1,6-heptadiynes) phases; further, this describes the capacitance, which improved from 0.3 to 0.1 pf at 1 kHz. Also, these results suggest the reduced equivalent series resistance (72.1-1 MHz), which attributes to the incorporated intrinsically conducting poly(1,6-heptadiynes). Thus, the reduced dissipation factor (DF = 0.0032) was observed from impedance characteristics of a nanocomposite. Moreover, the improved Q-factor was observed, which was about 8.1-310 at 1 kHz. The resistance and capacitance time constant was also computed to be about 0.29 μs at 1 kHz for NiFe2O4/poly(1,6-heptadiynes) nanocomposite. Furthermore, the nanocomposite-enabled capacitor gravimetric energy density and power densities were calculated to be about 0.00575 mJ/g and 9.91 W/g, respectively. Additionally, thermal threatening, that is, heat generated within the capacitor, P loss is also estimated for the nanocomposite capacitor, which improved from 0.0006 to 8.9 × 10-6, and these results suggest improved nanocomposite thermal stability. Further, the delineated quantities were compared to the commercially available configurations of tantalum hybrid capacitors and Al and Ta electrolytic capacitors, including carbon electrochemical capacitors, which suggest that the reported nanocomposites could be a suitable candidate for electrical and electronic applications.

Dataset Information

Magnetic CuFe₂O₄ Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage.

Publications

Magnetic CuFe<sub>2</sub>O<sub>4</sub> Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets