Dataset Information

Adsorption Characteristics of Ionic Surfactants on Anthracite Surface: A Combined Experimental and Modeling Study.

ABSTRACT: Ionic surfactants are widely used in coal dust control in mines, and their adsorption characteristics on the coal surface have a great influence on the coal dust control effect. In this investigation, anionic sodium dodecylbenzenesulfonate (SDBS) and cationic octadecyltrimethylammonium chloride (STAC) were selected to explore the adsorption characteristics of ionic surfactants on the surface of anthracite. The experimental results show that the adsorption rate and efficiency of STAC on the surface of anthracite are higher than that of SDBS; STAC can form a denser surfactant layer on the surface of anthracite, with a larger adsorption capacity and higher strength. Molecular dynamics simulations show that the adsorption between STAC and the surface of anthracite is tighter, and the distribution at the coal-water interface is more uniform; the surface of anthracite modified by STAC has a stronger binding ability to water molecules.

SUBMITTER: Bai X

PROVIDER: S-EPMC9416174 | biostudies-literature | 2022 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Adsorption Characteristics of Ionic Surfactants on Anthracite Surface: A Combined Experimental and Modeling Study.

Bai Xuyang X Yan Guochao G Chen Xuanlai X Li Jiajun J

Molecules (Basel, Switzerland) 20220820 16

Ionic surfactants are widely used in coal dust control in mines, and their adsorption characteristics on the coal surface have a great influence on the coal dust control effect. In this investigation, anionic sodium dodecylbenzenesulfonate (SDBS) and cationic octadecyltrimethylammonium chloride (STAC) were selected to explore the adsorption characteristics of ionic surfactants on the surface of anthracite. The experimental results show that the adsorption rate and efficiency of STAC on the surfa ...[more]

PMID: 36014549

Similar Datasets

Project description:The strong adsorption capacity of methane in anthracite can seriously affect the methane extraction. Electrochemical treatment is an effective way to weaken the capacity of methane adsorption in coal. Iron, copper, aluminum and graphite as four kinds of electrode materials were selected to modify anthracite by electrochemical treatment. The adsorption of methane in anthracite, before and after modification, was tested under different adsorption pressure. Based on the changes of pore characteristics and chemical groups of anthracite, the modification process of different electrode materials was analyzed. The results showed that after electrochemical modification, the adsorption of methane decreased, when the graphite electrode was used, the methane adsorption decreases the most, followed by copper and iron electrodes, and the aluminum electrode decreased the least. After electrochemical modification using aluminum, iron, copper and graphite electrodes, the Langmuir constant a reduced by 5.22%, 8.48%, 9.24% and 11.33%, respectively, and the degree of reduction is graphite > copper > iron > aluminum. After electrochemical modification using the graphite electrode, the Langmuir constant b was reduced by 23.52%. On the contrary, after electrochemical modification using the mental electrodes, the Langmuir constant b was increased by about 5%. The surface free energy of anthracite decreased with the adsorption of CH4, the higher the pressure, the more the free energy decreased, and the reduction of surface energy decreased after electrochemical modification. The difference of the electrode reactions was the main reason for the electrochemical results, the Mn+ ions generated in the anode changed the properties of the clay mineral in the coal, and the H+ ions corroded the calcite minerals in the coal. The results obtained from this work indicate that the selection of electrode materials is crucial for the electrochemical modification, and graphite electrode is optimum for anthracite when accelerating methane extraction by electrochemical method.

Project description:Surfactants adsorption onto carbonate reservoirs would cause surfactants concentrations decrease in surfactant flooding, which would decrease surfactant efficiency in practical applications of enhanced oil recovery (EOR) processes. Different surfactants could be classified as cationic surfactants, anionic surfactants, non-ionic surfactants according to the main charge, or be classified as chemical surfactant and bio-surfactant according to the surfactant origin. However, the research on different type surfactants adsorption on carbonate reservoirs surface differences was few. Therefore, five representative surfactants (CTAB, SDS, TX-100, sophorolipid, rhamonilipid) adsorption effect onto carbonate reservoirs surface was studied. Owing to the fact that the salinity and temperature in underground carbonate reservoirs were high during the EOR process, it is vital to study the salinity effect and temperature effect on surfactant adsorption. In this study, different surfactants species, temperature and salinity adsorption onto carbonate reservoirs were studied. The adsorption isotherms were fitted by Langmuir, Freundlich, Temkin and Linear models, and the first three models fitting effect were good. The results showed that cationic surfactants adsorption quantity was higher than anionic surfactants, and the non-ionic surfactants adsorption quantity was the lowest. When the temperature increased, the surfactants adsorption would decrease, because the adsorption process was exothermic process, and increasing temperature would inhibit the adsorption. The higher salinity would increase surfactants adsorption because higher salinity could compress electric double layer. In order to decrease surfactants adsorption, SiO2 nanoparticles and TiO2 nanoparticles were added to surfactants solutions, and then surfactants could adsorb onto nanoparticles surface, then the steric hindrance between surfactant molecules would increase, which could decrease surfactants adsorption. Contact angle results indicated that surfactants adsorption made the carbonate reservoir wettability alteration. In the end, surfactants (with or without SiO2 nanoparticles) adsorption onto carbonate reservoirs mechanism were studied by molecular dynamics simulation. The simulation results indicated that the surfactants molecules could adsorb onto SiO2 nanoparticles surface, and then the surfactants adsorption quantity onto carbonate rocks would decrease, which was in accordance with the experiments results.

Project description:Inhalable coal dust poses a serious threat to coal mining safety, air quality, and the health of miners. Therefore, the development of efficient dust suppressants is crucial for addressing this issue. This study evaluated the ability of three high-surface-active OPEO-type nonionic surfactants (OP4, OP9, and OP13) to improve the wetting properties of anthracite via extensive experiments and a molecular simulation and determined the micro-mechanism of different wetting properties. The surface tension results show that OP4 has the lowest surface tension (27.182 mN/m). Contact angle tests and wetting kinetics models suggest that OP4 exhibits the strongest wetting improvement ability on raw coal with the smallest contact angle (20.1°) and the fastest wetting rate. In addition, FTIR and XPS experimental results also reveal that OP4-treated coal surfaces introduce the most hydrophilic elements and groups. UV spectroscopy testing shows that OP4 has the highest adsorption capacity on the coal surface, reaching 133.45 mg/g. The surfactant is adsorbed on the surface and pores of anthracite, while the strong adsorption ability of OP4 results in the least amount of N2 adsorption (8.408 cm3/g) but the largest specific surface area (1.673 m2/g). In addition, the filling behavior and aggregation behavior of surfactants on the anthracite coal surface were observed using SEM. The MD simulation results indicate that OPEO reagents with overly long hydrophilic chains would produce spatial effects on the coal surface. Under the influence of the π-π interaction between the hydrophobic benzene ring and the coal surface, OPEO reagents with fewer ethylene oxide quantities are more prone to adsorb onto the coal surface. Therefore, after the adsorption of OP4, both the polarity and the water molecule adhesion ability of the coal surface are greatly enhanced, which helps to suppress dust production. These results provide important references and a foundation for future designs of efficient compound dust suppressant systems.

Dataset Information

Adsorption Characteristics of Ionic Surfactants on Anthracite Surface: A Combined Experimental and Modeling Study.

Publications

Adsorption Characteristics of Ionic Surfactants on Anthracite Surface: A Combined Experimental and Modeling Study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets