Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Vanadium doped CaTiO₃ cuboids: role of vanadium in improving the photocatalytic activity.

ABSTRACT: CaTiO₃ has attracted enormous interest in the fields of photocatalytic dye degradation and water splitting owing to its low cost, excellent physicochemical stability and structural tunability. Herein, we have developed a simple one pot solvothermal approach which directs V into the Ti sites in the isovalent state during the synthesis of V doped CaTiO₃ cuboids. The prediction of reduction in the band gap due to the formation of additional levels just beneath the conduction band edge by the first principles density functional electronic structure study is confirmed by the experimental results. The suppression of charge carrier recombination in 1.0 V leads to the highest photocatalytic activity in the degradation of methylene blue. The percentage degradation of 94.2 indicates its suitability as an excellent catalyst for photocatalytic water treatment.

SUBMITTER: Bantawal H

PROVIDER: S-EPMC9416911 | biostudies-literature | 2021 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Vanadium doped CaTiO3 cuboids: role of vanadium in improving the photocatalytic activity.

Bantawal Harsha H Shenoy U Sandhya US Bhat D Krishna DK

Nanoscale advances 20210728 18

CaTiO3 has attracted enormous interest in the fields of photocatalytic dye degradation and water splitting owing to its low cost, excellent physicochemical stability and structural tunability. Herein, we have developed a simple one pot solvothermal approach which directs V into the Ti sites in the isovalent state during the synthesis of V doped CaTiO3 cuboids. The prediction of reduction in the band gap due to the formation of additional levels just beneath the conduction b ...[more]

PMID: 36132633

Similar Datasets

The Photocatalytic Activity of CaTiO3 Derived from the Microwave-Melting Heating Process of Blast Furnace Slag.

Project description:The extraction of titanium-bearing components in the form of CaTiO3 is an efficient utilization of blast furnace slag. The photocatalytic performance of this obtained CaTiO3 (MM-CaTiO3) as a catalyst for methylene blue (MB) degradation was evaluated in this study. The analyses indicated that the MM-CaTiO3 had a completed structure with a special length-diameter ratio. Furthermore, the oxygen vacancy was easier to generate on a MM-CaTiO3(110) plane during the photocatalytic process, contributing to improving photocatalytic activity. Compared with traditional catalysts, MM-CaTiO3 has a narrower optical band gap and visible-light responsive performance. The degradation experiments further confirmed that the photocatalytic degradation efficiency of pollutants by using MM-CaTiO3 was 3.2 times that of pristine CaTiO3 in optimized conditions. Combined with molecular simulation, the degradation mechanism clarified that acridine of MB molecular was stepwise destroyed by using MM-CaTiO3 in short times, which is different from demethylation and methylenedioxy ring degradation by using TiO2. This study provided a promising routine for using solid waste to obtain catalysts with excellent photocatalytic activity and was found to be in keeping with sustainable environmental development.

| S-EPMC10142369 | biostudies-literature

Role of cooperative factors in the photocatalytic activity of Ba and Mn doped BiFeO3 nanoparticles.

Project description:The escalated photocatalytic (PC) efficiency of the visible light absorber Ba-doped BiFe0.95Mn0.05O3 (BFM) nanoparticles (NPs) as compared to BiFeO3 (BFO) NPs is reported for the degradation of the organic pollutants rhodamine B and methyl orange. 1 mol% Ba-doped-BFM NPs degrade both dyes within 60 and 25 minutes under UV + visible illumination, respectively. The Ba and Mn co-doping up to 5 mol% in BFO NPs increases the specific surface area, energy of d-d transitions, and PC efficiency of the BFO NPs. The maximum PC efficiency found in 1 mol% Ba doped BFM NPs is attributed to a cooperative effect of factors like its increased light absorption ability, large surface area, active surface, reduced recombination of charge carriers, and spontaneous polarization to induce charge carrier separation. The 1 mol% Ba and 5 mol% Mn co-incorporation is found to be the optimum dopant concentration for photocatalytic applications. These properties of co-doped BFO NPs can, e.g., be exploited in the field of water splitting.

| S-EPMC9419078 | biostudies-literature

Enhanced photocatalytic activity of Se-doped TiO2 under visible light irradiation.

Project description:Anatase TiO2 is a typical photocatalyst, and its excellent performance is limited in ultraviolet light range due to its wide band gap of 3.2 eV. A series of Se-doped TiO2 nanoparticles in anatase structure with various Se concentrations up to 17.1 at.% were prepared using sol-gel method. The doped Se ions are confirmed to be mainly in the valence state of + 4, which provides extra electronic states in the band gap of TiO2. The band gap is effectively narrowed with the smallest gap energy of 2.17 eV, and the photocatalytic activity is effectively improved due to the extended absorption range. The photocatalytic activity was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution under visible light irradiation. The results show that Se doping significantly improves the photocatalytic activity of TiO2 and 13.63 at.% Se-doped TiO2 has the best performance.

| S-EPMC5993730 | biostudies-literature

Soft Zr-doped TiO2 Nanofibrous Membranes with Enhanced Photocatalytic Activity for Water Purification.

Project description:Self-standing photocatalytic membranes constructed from TiO2 nanofibers hold great promise in environmental remediation; however, challenges still remained for the poor mechanical properties of polycrystalline TiO2 nanofibers. Herein, soft Zr-doped TiO2 (TZ) nanofibrous membranes with robust mechanical properties and enhanced photocatalytic activity were fabricated via electrospinning technique. The Zr4+ incorporation could effectively inhibit the grain growth and reduce the surface defects and breaking point of TiO2 nanofiber. The as-prepared TZ membranes were composed of well-interconnected nanofibers with a high aspect ratios, small grain size and pore size, which exhibited good tensile strength (1.32 MPa) and showed no obvious damage after 200 cycles of bending to a radius of 2 mm. A plausible bending deformation mechanism of the soft TZ membranes was proposed from microscopic single nanofiber to macroscopical membranes. Moreover, the resultant TZ membranes displayed better photocatalytic performance for methylene blue degradation compared to a commercial catalyst (P25), including high degradation degree of 95.4% within 30 min, good reusability in 5 cycles, and easiness of recycling. The successful preparation of such fascinating materials may open up new avenues for the design and development of soft TiO2-based membranes for various application.

| S-EPMC5431652 | biostudies-literature

Solar Photocatalytic Activity of Ba-Doped ZnO Nanoparticles: The Role of Surface Hydrophilicity.

Project description:Bare zinc oxide (ZnO) and Ba-doped ZnO (BZO) samples were prepared by using a simple precipitation method. The effects of Barium doping on the structural, morphological, and optoelectronic properties, as well as on the physico-chemical features of the surface were investigated and correlated with the observed photocatalytic activity under natural solar irradiation. The incorporation of Ba2+ ions into the ZnO structure increased the surface area by ca. 14 times and enhanced the hydrophilicity with respect to the bare sample, as demonstrated by infrared spectroscopy and contact angle measurements. The surface hydrophilicity was correlated with the enhanced defectivity of the doped sample, as indicated by X-ray diffraction, Raman, and fluorescence spectroscopies. The resulting higher affinity with water was, for the first time, invoked as an important factor justifying the superior photocatalytic performance of BZO compared to the undoped one, in addition to the slightly higher separation of the photoproduced pairs, an effect that has already been reported in literature. In particular, observed kinetic constants values of 8∙10-3 and 11.3∙10-3 min-1 were determined for the ZnO and BZO samples, respectively, by assuming first order kinetics. Importantly, Ba doping suppressed photocorrosion and increased the stability of the BZO sample under irradiation, making it a promising photocatalyst for the abatement of toxic species.

| S-EPMC10609520 | biostudies-literature

Porous TiO2/Carbon Dot Nanoflowers with Enhanced Surface Areas for Improving Photocatalytic Activity.

Project description:Electron-hole recombination and the narrow-range utilization of sunlight limit the photocatalytic efficiency of titanium oxide (TiO2). We synthesized carbon dots (CDs) and modified TiO2 nanoparticles (NPs) with a flower-like mesoporous structure, i.e., porous TiO2/CDs nanoflowers. Among such hybrid particles, the CDs worked as photosensitizers for the mesoporous TiO2 and enabled the resultant TiO2/CDs nanoflowers with a wide-range light absorption. Rhodamine B (Rh-B) was employed as a model organic pollutant to investigate the photocatalytic activity of the TiO2/CDs nanoflowers. The results demonstrated that the decoration of the CDs on both the TiO2 nanoflowers and the (commercially available AEROXIDE TiO2) P25 NPs enabled a significant improvement in the photocatalytic degradation efficiency compared with the pristine TiO2. The TiO2/CDs nanoflowers, with their porous structure and larger surface areas compared to P25, showed a higher efficiency to prevent local aggregation of carbon materials. All of the results revealed that the introduced CDs, with the unique mesoporous structure, large surface areas and loads of pore channels of the prepared TiO2 NPs, played important roles in the enhancement of the photocatalytic efficiency of the TiO2/CDs hybrid nanoflowers.

| S-EPMC9331435 | biostudies-literature

Transition metal ion-doped In2O3 nanocubes: investigation of their photocatalytic degradation activity under sunlight.

Project description:The objective of this work was to study the effect of transition metal ion doping (1 wt% of Mn, Fe, Co, Ni, and Cu) in indium oxide (In2O3) on its photocatalytic activity to degrade organic dyes, which are considered potential environment pollutants. The transition metal ion-doped In2O3 nanocube photocatalyst was prepared via the hydrothermal method. After understanding the thermal behavior of the as-prepared sample (In(OH)3), it was calcined at 400 °C for 3 h to obtain In2O3. The In2O3 was systematically investigated via FESEM, X-ray diffraction, Raman spectroscopy and UV-vis absorption analysis. Microstructure analysis by FESEM showed that the In2O3 was formed as nanocubes. These nanocubes were formed in a single phase with a cubic crystal structure, while their crystallite size increased from 11 nm to 19 nm when doped with 1 wt% of transition metals, including Mn, Fe, Co, Ni and Cu. The band gap energy for pure In2O3 was determined to be 3 eV, and that for the metal ion-doped In2O3 showed a slight decrease to the lowest value of 2.94 eV. The photoluminescence (PL) decay lifetime was found to be in the range of 28.56 ns to 33.89 ns. Photocatalytic experiments were conducted for the degradation of methylene blue (MB) dye under sunlight irradiation in the presence of the In2O3 nanocubes. Among the five metal ion-doped samples, the Ni ion-doped In2O3 photocatalyst exhibited the highest degradation efficiency of 98% in 270 min of sunlight exposure. The high performance of Ni-In2O3 is due to its highest PL lifetime of 33.89 ns. The complete route for the degradation of MB dye was revealed by identifying the intermediates.

| S-EPMC9418826 | biostudies-literature

Enhanced Photocatalytic Activity of Nonuniformly Nitrogen-Doped Nb2O5 by Prolonging the Lifetime of Photogenerated Holes.

Project description:The narrow band gap and significant separation of photogenerated carriers are essential aspects in practical photocatalytic applications. Nitrogen doping usually narrows the band gap of semiconductor oxides, and it enhances photocatalytic activity. Nitrogen-doped Nb2O5 was prepared by a multiple hydrothermal method. The non-metal element N inside the nanostructure, working as the trapping sites for the holes, which were effectively incorporated into the crystal lattice of Nb2O5 semiconductor oxide, remarkably shorten the band gap (3.1 eV) to enhance the visible light response, effectively reducing the photoinduced electron-hole pair recombination and prolonging carrier lifetime. The multilayer coating structure with a gradient concentration distribution and the type of nitrogen doped is favorable for the migration of photoexcited carriers in the bulk of catalysts. The unique multi-layer coating with the micro-concentration gradient of doped nitrogen provides a fast separation channel and jump steps for the separation of electron-hole pairs.

| S-EPMC9147847 | biostudies-literature

Experimental and Computational Study of Zr and CNC-Doped MnO2 Nanorods for Photocatalytic and Antibacterial Activity.

Project description:Cellulose nanocrystals (CNC), MnO2, CNC-doped MnO2, and Zr/CNC-doped MnO2 were prepared with a hydrothermal method to assess their photocatalytic and antibacterial properties. Various characterizations were undertaken to determine the phase composition, the existence of functional units, optical characteristics, elemental analysis, surface topography, and microstructure of the prepared materials. Sample crystallinity was improved, whereas a decrease in crystallite size was observed with increasing amounts of dopants. Incorporation of dopants (CNC and Zr) into MnO2 instigated a transformation in morphology from nanoclusters to nanorods with different diameters. Furthermore, photocatalytic activity experiments indicated a more effective degradation of methylene blue (MB) dye with CNC-doped MnO2 and Zr/CNC-codoped MnO2 while enhancing the bacterial efficacy for both G +ve and G -ve. Density functional theory was utilized to model the structures and elucidate their bonding and charge transfer mechanisms. The Zr/CNC-MnO2 system showed charge depletion around Mn atoms, while charges were observed to accumulate around oxygen atoms.

| S-EPMC9089389 | biostudies-literature

Low Overpotential Electrochemical Reduction of CO2 to Ethanol Enabled by Cu/CuxO Nanoparticles Embedded in Nitrogen-Doped Carbon Cuboids.

Project description:The electrochemical conversion of CO2 into value-added chemicals is a promising approach for addressing environmental and energy supply problems. In this study, electrochemical CO2 catalysis to ethanol is achieved using incorporated Cu/CuxO nanoparticles into nitrogenous porous carbon cuboids. Pyrolysis of the coordinated Cu cations with nitrogen heterocycles allowed Cu nanoparticles to detach from the coordination complex but remain dispersed throughout the porous carbon cuboids. The heterogeneous composite Cu/CuxO-PCC-0h electrocatalyst reduced CO2 to ethanol at low overpotential in 0.5 M KHCO3, exhibiting maximum ethanol faradaic efficiency of 50% at -0.5 V vs. reversible hydrogen electrode. Such electrochemical performance can be ascribed to the synergy between pyridinic nitrogen species, Cu/CuxO nanoparticles, and porous carbon morphology, together providing efficient CO2 diffusion, activation, and intermediates stabilization. This was supported by the notably high electrochemically active surface area, rich porosity, and efficient charge transfer properties.

| S-EPMC9863918 | biostudies-literature