Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lightweight, mechanically flexible and thermally superinsulating rGO/polyimide nanocomposite foam with an anisotropic microstructure.

ABSTRACT: We report that lightweight, anisotropic, mechanically flexible, and high performance thermally insulating materials are fabricated by the assembly of graphene oxide (GO) and polyimide (PI). With an appropriate ratio between GO and PI building blocks, the rGO/PI thermally insulating material exhibits hierarchically aligned microstructures with high porosity. These microstructures endow the rGO/PI nanocomposite with low mass density and super-insulating property (extremely low thermal conductivity of 0.012 W m^-1 K^-1 in the radial direction). Meanwhile, the introduction of PI enhances the mechanical strength and thermal stability of rGO foam. Our rGO/PI nanocomposites as super-insulating foams with a low thermal conductivity are highly attractive for potential thermal insulation applications in aerospace, wearable devices, and energy-efficient buildings.

SUBMITTER: Qin Y

PROVIDER: S-EPMC9417714 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Lightweight, mechanically flexible and thermally superinsulating rGO/polyimide nanocomposite foam with an anisotropic microstructure.

Qin Yuyang Y Peng Qingyu Q Zhu Yue Y Zhao Xu X Lin Zaishan Z He Xiaodong X Li Yibin Y

Nanoscale advances 20191101 12

We report that lightweight, anisotropic, mechanically flexible, and high performance thermally insulating materials are fabricated by the assembly of graphene oxide (GO) and polyimide (PI). With an appropriate ratio between GO and PI building blocks, the rGO/PI thermally insulating material exhibits hierarchically aligned microstructures with high porosity. These microstructures endow the rGO/PI nanocomposite with low mass density and super-insulating property (extremely low thermal conductivity ...[more]

PMID: 36133118

Similar Datasets

Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose.

Project description:There has been a growing interest in thermal management materials due to the prevailing energy challenges and unfulfilled needs for thermal insulation applications. We demonstrate the exceptional thermal management capabilities of a large-scale, hierarchal alignment of cellulose nanofibrils directly fabricated from wood, hereafter referred to as nanowood. Nanowood exhibits anisotropic thermal properties with an extremely low thermal conductivity of 0.03 W/m·K in the transverse direction (perpendicular to the nanofibrils) and approximately two times higher thermal conductivity of 0.06 W/m·K in the axial direction due to the hierarchically aligned nanofibrils within the highly porous backbone. The anisotropy of the thermal conductivity enables efficient thermal dissipation along the axial direction, thereby preventing local overheating on the illuminated side while yielding improved thermal insulation along the backside that cannot be obtained with isotropic thermal insulators. The nanowood also shows a low emissivity of <5% over the solar spectrum with the ability to effectively reflect solar thermal energy. Moreover, the nanowood is lightweight yet strong, owing to the effective bonding between the aligned cellulose nanofibrils with a high compressive strength of 13 MPa in the axial direction and 20 MPa in the transverse direction at 75% strain, which exceeds other thermal insulation materials, such as silica and polymer aerogels, Styrofoam, and wool. The excellent thermal management, abundance, biodegradability, high mechanical strength, low mass density, and manufacturing scalability of the nanowood make this material highly attractive for practical thermal insulation applications.

| S-EPMC5844708 | biostudies-literature

Lightweight, Anisotropic, Compressible, and Thermally-Insulating Wood Aerogels with Aligned Cellulose Fibers.

Project description:The growing demand for lightweight, renewable, and excellent thermal insulation materials has fueled a search for high performance biomass materials with good mechanical compressibility and ultralow thermal conductivity. We propose a fabrication method for making a lightweight, anisotropic, and compressible wood aerogel with aligned cellulose fibers by a simple chemical treatment. The wood aerogel was mainly composed of highly aligned cellulose fibers with a relative crystallinity of 77.1%. The aerogel exhibits a low density of 32.18 mg/cm3 and a high specific surface area of 31.68 m2/g due to the removal of lignin and hemicellulose from the wood. Moreover, the multilayer structure of the aerogel was formed under the restriction of wood rays. Combined with a nanoscale pore, the aerogel presents good compressibility and an ultralow thermal conductivity of 0.033 W/mK. These results show that the wood aerogel is a high quality biomass material with a potential function of thermal insulation through optimizing structures.

| S-EPMC7022930 | biostudies-literature

A Lightweight, Elastic, and Thermally Insulating Stealth Foam With High Infrared-Radar Compatibility.

Project description:The development of infrared-radar compatible materials/devices is challenging because the requirements of material properties between infrared and radar stealth are contradictory. Herein, a composite of poly(3, 4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) coated melamine foam is designed to integrate the advantages of the dual materials and the created heterogeneous interface between them. The as-designed PEDOT:PSS@melamine composite shows excellent mechanical properties, outstanding thermal insulation, and improved thermal infrared stealth performance. The relevant superb radar stealth performance including the minimum reflection loss value of -57.57 dB, the optimum ultra-wide bandwidth of 10.52 GHz, and the simulation of radar cross section reduction value of 17.68 dB m2 , can be achieved. The optimal specific electromagnetic wave absorption performance can reach up as high as 3263.02 dB·cm3 g-1 . The average electromagnetic interference shielding effectiveness value can be 30.80 dB. This study provides an approach for the design of high-performance stealth materials with infrared-radar compatibility.

| S-EPMC9762302 | biostudies-literature

Fabricating high thermal conductivity rGO/polyimide nanocomposite films via a freeze-drying approach.

Project description:The preparation of polymeric composite materials with low filler content as well as high thermal conductivity has been an important subject for the field of polymer material research. During our recent investigation on polyimide (PI), it was found that poly(amic acid) (PAA) solution (in dimethylacetamide, DMAc) could crystallize at low temperature. When adding reduced graphene oxide (rGO) as the thermal conductive fillers in the PAA solution, it was also found that the crystallization process of PAA would impel the rGO to rearrange in order and form an aligned thermal conductive network. To retain the rGO network structure, the freeze-drying technique was used to remove the solvent. Subsequently, through a thermal imidization process the final rGO/PI films containing a 3D rGO network could be obtained. The PI composite films retain good flexibility, excellent thermal stability, and exhibit excellent thermal conductivity. When the content of rGO added is 8 wt%, the thermal conductivity of the rGO/PI film can reach a high value of 2.78 W m-1 K-1, which is about 15.4 times that of neat PI and 5.5 times that of the rGO/PI composite film prepared by the conventional two-step routine with the same content of rGO.

| S-EPMC9081100 | biostudies-literature

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures.

Project description:Polyimide foam (PIF) is a rising star in high-end applications such as aerospace thermal insulation and military sound absorption. However, the basic rule on molecular backbone design and uniform pore formation of PIF still need to be explored. In this work, polyester ammonium salt (PEAS) precursor powders are synthesized between alcoholysis ester of 3, 3', 4, 4'-benzophenone tetracarboxylic dianhydride (BTDE) and aromatic diamines with different chain flexibility and conformation symmetry. Then, a standard "stepwise heating" thermo-foaming approach is used to prepare PIF with comprehensive properties. A rational thermo-foaming program is designed based on in situ observation of pore formation during heating. The fabricated PIFs have uniform pore structure, and PIFBTDA-PDA shows the smallest size (147 μm) and narrow distribution. Interestingly, PIFBTDA-PDA also presents a balanced strain recovery rate (SR = 91%) and mechanical robustness (0.051 MPa at 25% strain) and its pore structure maintains regularity after 10 compression-recovery cycles, mainly due to high rigidity of the chains. Furthermore, all the PIFs possess lightweight feature (15-20 kg∙m-3), good heat resistance (Tg at 270-340 °C), thermal stability (T5% at 480-530 °C), thermal insulation properties (λ = 0.046-0.053 W∙m-1K-1 at 20 °C, λ = 0.078-0.089 W∙m-1K-1 at 200 °C), and excellent flame retardancy (LOI > 40%). The reported monomer-mediated pore-structure control strategy can provide guidelines for the preparation of high-performance PIF and its industrial applications.

| S-EPMC10304918 | biostudies-literature

Microstructure induced dielectric loss in lightweight Fe3O4 foam for electromagnetic wave absorption.

Project description:Fe3O4 has been extensively applied in electromagnetic wave absorption field profiting from its advantageous magnetic loss, low cost and environmental benignity. Nevertheless, the inherent drawbacks of high density, low permittivity and easily magnetic aggregation are still the obstacles for pristine Fe3O4 becoming ideal absorbents. To overcome such limitations, a design mentality of constructing 3D structure shaped by curled 2D porous surface is proposed in this study. 3D structure overcomes the easy-agglomeration issue of 2D materials and meanwhile maintains their conductivity. The complex permittivity of samples is regulated by adjusting the microstructure of Fe3O4 to achieve optimum impedance matching. Defect induced polarization and interfacial polarization are the main loss mechanisms. Impressively, the density of S0.5 is only 0.05078 g/cm3 and the effective absorption bandwidth is up to 6.24 GHz (11.76-18 GHz) at 1.8 mm. This work provided a new insight for structurally improving the EMW absorption performance of pure magnetic materials.

| S-EPMC8889371 | biostudies-literature

Flexible solid-liquid bi-continuous electrically and thermally conductive nanocomposite for electromagnetic interference shielding and heat dissipation.

Project description:In the era of 5 G, the rise in power density in miniaturized, flexible electronic devices has created an urgent need for thin, flexible, polymer-based electrically and thermally conductive nanocomposites to address challenges related to electromagnetic interference (EMI) and heat accumulation. However, the difficulties in establishing enduring and continuous transfer pathways for electrons and phonons using solid-rigid conductive fillers within insulative polymer matrices limit the development of such nanocomposites. Herein, we incorporate MXene-bridging-liquid metal (MBLM) solid-liquid bi-continuous electrical-thermal conductive networks within aramid nanofiber/polyvinyl alcohol (AP) matrices, resulting in the AP/MBLM nanocomposite with ultra-high electrical conductivity (3984 S/cm) and distinguished thermal conductivity of 13.17 W m-1 K-1. This nanocomposite exhibits excellent EMI shielding efficiency (SE) of 74.6 dB at a minimal thickness of 22 μm, and maintains high EMI shielding stability after enduring various harsh conditions. Meanwhile, the AP/MBLM nanocomposite also demonstrates promising heat dissipation behavior. This work expands the concept of creating thin films with high electrical and thermal conductivity.

| S-EPMC11379691 | biostudies-literature

Thermally Switchable Electrically Conductive Thermoset rGO/PK Self-Healing Composites.

Project description:Among smart materials, self-healing is one of the most studied properties. A self-healing polymer can repair the cracks that occurred in the structure of the material. Polyketones, which are high-performance thermoplastic polymers, are a suitable material for a self-healing mechanism: a furanic pendant moiety can be introduced into the backbone and used as a diene for a temperature reversible Diels-Alder reaction with bismaleimide. The Diels-Alder adduct is formed at around 50 °C and broken at about 120 °C, giving an intrinsic, stimuli-responsive self-healing material triggered by temperature variations. Also, reduced graphene oxide (rGO) is added to the polymer matrix (1.6-7 wt%), giving a reversible OFF-ON electrically conductive polymer network. Remarkably, the electrical conductivity is activated when reaching temperatures higher than 100 °C, thus suggesting applications as electronic switches based on self-healing soft devices.

| S-EPMC7865638 | biostudies-literature

Flexible and ultra-lightweight polymer membrane lasers.

Project description:Organic semiconductors enable the fabrication of a range of lightweight and mechanically flexible optoelectronic devices. Most organic semiconductor lasers, however, have remained rigid until now, predominantly due to the need for a support substrate. Here, we use a simple fabrication process to make membrane-based, substrate-less and extremely thin (<500 nm) organic distributed feedback lasers that offer ultralow-weight (m/A<0.5 gm-2) and excellent mechanical flexibility. We show operation of the lasers as free-standing membranes and transfer them onto other substrates, e.g. a banknote, where the unique lasing spectrum is readily read out and used as security feature. The pump thresholds and emission intensity of our membrane lasers are well within the permissible exposures for ocular safety and we demonstrate integration on contact lenses as wearable security tags.

| S-EPMC5931618 | biostudies-literature

Structural Effect of Polyimide Precursors on Highly Thermally Conductive Graphite Films.

Project description:In this study, polyimide (PI) with high carbonization yield was used as a precursor to prepare graphite films with high thermal conductivity. The crystallinity, grain size, and thermal conductivity of the graphite films were characterized and found to vary according to the chemical structure of the PI precursor. Aromatic PIs containing ortho-substituted hydroxyl groups in the PI main chain (DHB-BPDA) were synthesized by the polycondensation reaction of 3,3'-dihydroxybenzidine (DHB) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA). The DHB-BPDA is converted to a polybenzoxazole (PBO) structure through thermolysis reaction during carbonization. The PBO containing a benzene ring and a heterocycle group can provide a strong main chain and high thermal stability due to its resonant structure. The graphite film prepared from DHB-BPDA exhibited a large grain size (63.727 nm) and a high thermal conductivity of 916 W/(mK).

| S-EPMC9330194 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data