Incremental Utility of 3D Printing to Guide the Surgical Management of Apical Aneurysm.
Ontology highlight
ABSTRACT:
SUBMITTER: Layoun H
PROVIDER: S-EPMC9434645 | biostudies-literature | 2022 Aug
REPOSITORIES: biostudies-literature
Publications
Incremental Utility of 3D Printing to Guide the Surgical Management of Apical Aneurysm.
Layoun Habib H Akintoye Emmanuel E Guler Erhan E O'Sullivan Katie K Krywanczyk Alison A Tong Michael Z Y MZY Harb Serge C SC
JACC. Case reports 20220817 16
A 24-year-old man presented with a nonischemic cardiomyopathy of unknown etiology, apical aneurysm, and a secondary mitral regurgitation. Computer tomography-derived 3-dimensional model of the patient's heart was an essential step in guiding the surgical management for an optimal outcome. (<b>Level of Difficulty: Advanced.</b>). ...[more]
Similar Datasets
Project description:IntroductionMicrotia, a congenital anomaly of the auricle with a wide spectrum of presentation with challenging reconstruction. Management depends on its severity with variable reconstructive options. Preoperative planning is crucial to achieve better results and decrease operative time. In this article, we aim to show the utility of an affordable technology with the use of a smartphone, an open-source computer-aided design (CAD) software, and a desktop 3D printer in planning future ear location for unilateral microtia reconstruction in step-by-step fashion.MethodologyFacial 3D scanning was done using a smartphone that has a three-dimensional capture system. The scan was then used in an open-sourced CAD software. A mirror image mask was created by reflecting normal side anatomic features to the abnormal side. The mask constitutes the desired area for reconstruction given the ear anthropometrics. Finally, the model was 3D printed and fitted to the patient in which incision marking and framework location was planned.DiscussionEar reconstruction requires careful assessment and specific technicality in its anthropometric measures. One important aspect in surgical planning resides in future ear location that varies between person to person. This variability makes the reconstructive option more customized based on the patient's needs. The utility of CAD software in the measurement and planning can help predict and optimize postoperative results as possible; however, it has major technical demands and added surgical fees.ConclusionHerein, we demonstrate the efficacy of an easy-to-use system beneficial for preoperative planning that is affordable, time-saving, and cost effective.
| S-EPMC8321891 | biostudies-literature
Project description:Tissue expansion with subsequent adjacent tissue transfer is often the preferred and sometimes the only option for reconstruction of large and giant congenital melanocytic nevi. Successful reconstruction with maximal efficiency and optimal aesthetic outcome requires careful planning of the tissue transfer, which itself requires careful selection of the tissue expander size and positioning. Unfortunately, there is little opportunity to gain experience in these skills due to the rarity of this condition. In situations where there is a rare condition that requires a complex technical procedure with much interoperative decision-making, surgical experience can be supplemented with the use of surgical simulation. In this article, we report on the use of three-dimensional patient imaging, three-dimensional printing, and surgical simulation for planning the reconstruction of large and giant congenital melanocytic nevi. We describe how this technology allows us to simulate multiple different approaches to expander placement and adjacent tissue transfer. We also describe how these simulations can be used to create cutting guides to guide final incision design and reduce intraoperative decision-making. Finally, we discuss how these models can be used to educate patients and families about the process and outcomes of nevus excision and reconstruction.
| S-EPMC10545266 | biostudies-literature
Project description:Stereolithography (SLA) is a form of 3D printing that is based on the curing of resin under UV light. There are a wide variety of 3D resin printers on the market that all follow the same general procedure. First, a slicing program is used to slice the model in a sequence of thin layers. The model will be printed in this sequence of layers after it is exported in a format recognizable by a 3D printer. In addition to this main function, slicing programs offer additional features to manipulate the model, adjust print settings, and add model supports. Next, after the printer is set up, the sliced model is loaded onto the printer and fabricated. Once the print is complete, the model can be washed, cured and sanded/polished to the desired finish. In this work, we utilize SLA 3D printing to print geological macromodels, to be utilized in flooding experiments. Images captured from the flooding experiments were then incorporated in a set of visual learning exercises for undergraduate students to enhance the study of immiscible fluid flow in porous media. SLA printing was selected in this use case as it provides important advantages over other common 3D printing technologies (e.g. Fused Depositional Modelling: FDM), such as high print resolvability of sub-millimeter scale pore geometry and a high degree of transparency within the resultant printed models. Overall, this method was found to:• Provide an engaging learning experience for undergraduate students, as the captured flooding experiment image time series allowed students to directly visualize often obtuse fluid flow processes in porous media.• Be easily reproducible: after completing an initial print the method can be reproduced for many different pore networks, allowing for a wide array of comparative studies and learning exercises to be developed. Graphical abstract Image, graphical abstract
| S-EPMC9513601 | biostudies-literature
Project description:Background3D-printing, or additive manufacturing has become increasingly popular across scientific and engineering fields. The same trend has been observed in the medical field, with the main users being the dentists and the neurosurgeons. Within orthopaedic surgery, usage has been limited by accessibility and costs. The benefits of a 3D printed model in surgical planning and education in orthopaedic surgery is obvious, especially in fields like deformity correction and fracture fixation.MethodsAn in-house 3D-printing facility was set up, with workflow processes defined. We utilised the described workflow to 3D-print models for four paediatric orthopaedic patients with differing pathologies.ResultsThese case examples show how 3D-printing of surgical models was easily performed, and they are useful in various clinical scenarios within paediatric orthopaedics. The steps involved in the process are accurately detailed, and are reproducible by any orthopaedic surgeon. The benefits of the application of 3D models in the deformity assessment and surgical planning of these cases are discussed individually.ConclusionsAn in-house 3D-printing facility is useful in paediatric orthopaedics due to the variety of complex pathologies and anatomy. We have shown that it is easy to set up with a defined work process. We advocate the application of this emerging technology into every orthopaedic practice.
| S-EPMC8039782 | biostudies-literature
Project description:Aneurisms of the splenic artery are rare clinical findings. Surgeons and interventional radiologists should co-operate in the management of this challenging disease; we describe here a surgical option.
| S-EPMC4856251 | biostudies-other
Project description:In minimally invasive surgery, maneuverability is usually limited and a large number of degrees of freedom (DOF) is highly demanded. However, increasing the DOF usually means increasing the complexity of the surgical instrument leading to long fabrication and assembly times. In this work, we propose the first fully 3D printed handheld, multi-steerable device. The proposed device is mechanically actuated, and possesses five serially controlled segments. We designed a new compliant segment providing high torsion and axial stiffness as well as a low bending stiffness by merging the functions of four helicoids and a continuum backbone. Compliant segments were combined to form the compliant shaft of the new device. In order to control this compliant shaft, a control handle was designed that mimics the shaft structure. A prototype called the HelicoFlex was built using only three 3D printed parts. HelicoFlex, with its 10 degrees of freedom, showed a fluid motion in performing single and multi-curved paths. The multi-steerable instrument was 3D printed without any support material in the compliant shaft itself. This work contributes to enlarge the body of knowledge regarding how additive manufacturing could be used in the production of multi-steerable surgical instruments for personalized medicine.
| S-EPMC7224500 | biostudies-literature
Project description:Pediatric idiopathic aortic aneurysm is rare. Single saccular malformation can complicate native or recurrent aortic coarctation; however, multiloculated dilatations of the descending thoracic aorta, associated with aortic coarctation, have so far never been described in literature. In our case, printed 3D model technology was crucial in planning transcatheter treatment. (Level of Difficulty: Intermediate.) Central Illustration
| S-EPMC9969546 | biostudies-literature
Project description:IntroductionElbow stiffness is an uncommon condition that significantly impacting a patient's daily activities. Trauma is the most frequent cause of elbow stiffness. However, capitellum fractures are rare, accounting for approximately 1 % of elbow fractures. They are often misdiagnosed due to nonspecific symptoms and the complex anatomy of the elbow joint.Case presentationWe report the case of a 54-year-old female who presented with left elbow stiffness eight months after a traumatic incident. On physical examination, her left elbow extension was +10°, and flexion was restricted to 65°, with no limitation in pronation or supination. Imaging studies revealed a malunited capitellum with osteophytes at the posterolateral site of the olecranon. A 3D-printed model of her elbow was created based on a CT scan to aid surgical planning. She underwent capsulectomy and osteotomy and was stabilized with two bioabsorbable P(L/DL)LA pins. Six months postoperatively, the patient's elbow range of motion was fully restored, and no complications were observed.Clinical discussionElbow stiffness resulting from the malunion of a capitellum fracture typically necessitates surgical intervention to restore functional movement in the elbow.ConclusionCapitellum fractures are uncommon and frequently underdiagnosed, leading to complications such as elbow stiffness and reduced functionality. Early detection is crucial, as delayed diagnosis can result in complex management due to malunion. 3D printing from CT scans helps surgeons accurately evaluate malunions and plan precise surgical interventions.
| S-EPMC11562399 | biostudies-literature
Project description:BackgroundRecent literature highlights the importance of treating hallux valgus (HV) as a 3-dimensional (3D) deformity. Although 3D printing may enhance visualization of the multiplanar aspects of HV, its influence on surgical planning remains unclear. This study assessed changes in surgical plans when surgeons sequentially reviewed 2D radiographs, 3D weightbearing computed tomography (WBCT), and 3D-printed models, hypothesizing that 3D printing would have the greatest impact.MethodsA single HV case (a 40-year-old woman, intermetatarsal angle [IMA] 21 degrees, HV angle [HVA] 47 degrees) was evaluated by 30 surgeons in a masked, stepwise manner. Surgical plans were recorded at each stage. Surgeons rated the influence of WBCT and 3D printing using a 5-point Likert scale. A follow-up survey examined the effect of these technologies on correction amplitudes.ResultsThe participants were mostly early career surgeons (median age 35.5 years, 2 years in practice). WBCT was accessible to 43.3% and used in 30% of HV cases, whereas 3D printing was accessible to 23.3% and used in 6.6%. Changes in the treatment algorithm occurred in 30% of cases after WBCT and in 43.3% after 3D printing. Significant differences (P < .05) were observed for the Lapicotton procedure between radiography and WBCT, and between WBCT and 3D printing. Surgeons performing <50 HV cases annually or with >70% Foot and Ankle specialization were more influenced by WBCT. Follow-up data (n = 23) indicated that WBCT and 3D printing influenced correction amplitudes, particularly for pronation and distal metatarsal articular angle (DMAA), more than for the IMA.DiscussionBoth WBCT and 3D printing influenced surgical planning, mostly explained by changes in first ray tarsometatarsal procedures. The rotational components (pronation and DMAA) were perceived as the most significantly affected. Future studies should explore cost-effectiveness, patient outcomes, and the utility of combining WBCT and 3D printing in other deformities requiring multiplanar corrections.Level of Evidence: Level IV, cross-sectional survey.
| S-EPMC11915313 | biostudies-literature
Project description:During the past 5 years, the body of literature surrounding the utilization of three-dimensional (3D) printing in the field of urology has grown exponentially. Incentivized by work hour restrictions, patient safety initiatives, and inspired by technical advances in biomaterials and rapid printing strategies, this emerging, and fascinating area of research has begun to make headway into clinical practice. However, concerns about cost, limited understanding of the technical processes involved, and lack of its potential uses remain barriers to its widespread adoption. We examined existing published literature on how 3D printing technologies have been utilized in the field of Urology to enhance pre-operative planning, revitalize surgical training, and modernize patient education, with particular focus on, robotic surgery. To date, 3D-printed models have been used and studied most commonly in the preoperative planning for nephron-sparing surgeries during the treatment of renal masses, where the challenges of complex renal anatomy and benefits of reducing renal ischemic injury create the most intuitive value. Prostate models are the second most common, particularly in the planning of nerve-sparing procedures. Early studies have demonstrated sufficient realism and educational effectiveness. Subsequent studies demonstrated improved surgeon confidence, operative performance, and optimized patient outcomes including high levels of patient satisfaction. Realistic, accurate, and reasonably priced models can currently be generated within hours using standard desktop 3D printers. While primarily utilized as anatomic replicas of diseased organs that restore a sense of haptic feedback lost in robotic procedures, innovations in polymers, improvements in 3D printer host and modeling software, and upgrades in printer hardware allow this technology to serve as a comprehensive, interactive, simulation platform that can be a critical surgical decision making as well as an effective teaching tool. As Urologists continue to rapidly diversify and iterate upon this adaptive modality, the benefits in patient outcomes will likely outpace the diminishing drawbacks, and we may well see the next revolution in surgical education, robotic techniques, and personalized medicine concurrently.
| S-EPMC7214988 | biostudies-literature