Effect of Fe(III) Species on the Stability of a Water-Model Oil Emulsion with an Anionic Sulfonate Surfactant as an Emulsifier
Ontology highlight
ABSTRACT:
SUBMITTER: Zheng C
PROVIDER: S-EPMC9583334 | biostudies-literature | 2022 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Emulsion technology is widely used in the preparation of cosmetics, pharmaceuticals, drug delivery, and other daily necessities, and surfactants are frequently used to prepare these emulsions because of the lack of reliable surfactant-free emulsification techniques. This is disadvantageous because some surfactants pose health hazards, cause environmental pollution, have costly components, and place limitations on process development. In this paper, an efficient method for surfactant-free nano-emulsification is presented. In addition, we discuss the effects of different operating parameters on the oil particle size, as well as the effect of the particle size on the emulsion stability. Specifically, we compared three surfactant-free ultrasonic emulsification technologies (horn, bath, and focused ultrasonic systems). The focused ultrasonic system, which concentrates sound energy at the center of the dispersion system, showed the best performance, producing emulsions with a particle size distribution of 60-400 nm at 400 kHz. In addition, phase separation did not occur despite the lack of surfactants and thickeners, and the emulsion remained stable for seven days. It is expected to be widely used in eco-friendly emulsification processes.
| S-EPMC9101067 | biostudies-literature
Project description:The design and fabrication of advanced membrane materials for versatile oil/water separation are major challenges. In this work, a superwetting stainless steel mesh (SSM) modified with in situ-grown TiO2 was successfully prepared via one-pot hydrothermal synthesis at 180 °C for 24 h. The modified SSM was characterized by means of scanning electron microscopy, energy spectroscopy, and X-ray photoelectron spectroscopy analysis. The resultant SSM membrane was superhydrophilic/superoleophilic in air, superoleophobic underwater, with an oil contact angle (OCA) underwater of over 150°, and superhydrophobic under oil, with a water contact angle (WCA) as high as 158°. Facile separation of immiscible light oil/water and heavy oil/water was carried out using the prewetting method with water and oil, respectively. For both "oil-blocking" and "water-blocking" membranes, the separation efficiency was greater than 98%. Also, these SSMs wrapped in TiO2 nanoparticles broke emulsions well, separating oil-in-water and oil-in-water emulsions with an efficiency greater than 99.0%. The as-prepared superwetting materials provided a satisfactory solution for the complicated or versatile oil/water separation.
| S-EPMC10608510 | biostudies-literature
Project description:Irreversible colloidal asphaltene adsorption layers are formed on formation rock surfaces due to long-term contact with crude oil, and large amounts of crude oil adhere to these oil-wet layers to form residual oil films. This oil film is difficult to peel off due to the strong oil-solid interface effect, which seriously restricts further improvement in oil recovery. In this paper, the novel anionic-nonionic surfactant sodium laurate ethanolamide sulfonate (HLDEA) exhibiting strong wetting control was synthesized by introducing sulfonic acid groups into the nonionic surfactant laurate diethanolamide (LDEA) molecule through the Williamson etherification reaction. The introduction of the sulfonic acid groups greatly improved the salt tolerance and the absolute value of the zeta potential of the sand particles. The experimental results showed that HLDEA altered the wettability of the rock surface from oleophilic to strongly hydrophilic, and the underwater contact angle increased substantially from 54.7 to 155.9°. In addition, compared with LDEA, HLDEA exhibited excellent salt tolerance and enhanced oil recovery performance (the oil recovery was improved by 19.24% at 2.6 × 104 mg/L salinity). Based on nanomechanical experimental results, HLDEA was efficiently adsorbed on the core surfaces and regulated microwetting. Moreover, HLDEA effectively reduced the adhesion force between the alkane chains and the core surface, which facilitated residual oil stripping and oil displacement. This new anionic-nonionic surfactant affording great oil-solid interface wetting control has practical significance for the efficient development of residual oil.
| S-EPMC10268617 | biostudies-literature
Project description:The objective of this study was to evaluate the removal of linear alkylbenzene sulfonate (LAS) associated with Fe(III) supplementation using an expanded granular sludge bed (EGSB) reactor. The reactor was inoculated with a granular sludge obtained from a full scale UASB plant that treated effluent from a poultry slaughterhouse and fed with synthetic wastewater containing a specific LAS loading rate (SLLR) of 1.5 mg.gVS-1.d-1 (~ 16.4 mgLAS L-1 influent) and supplied with 7.276 µMol L-1 (~ 410 mgFe L-1) of Fe(III). The biomasses from the inoculum and at the end of the EGSB-Fe operation (127 days) were characterized using 16S rRNA Ion Tag sequencing. An increase of 20 % in the removal efficiency was observed compared to reactors without Fe(III) supplementation that was reported in the literature, and the LAS removal was approximately 84 %. The Fe(III) reduction was dissimilatory (the total iron concentration in the influent and effluent were similar) and reached approximately 64 %. The higher Fe(III) reduction and LAS removal were corroborated by the enrichment of genera, such as Shewanella (only EGSB-Fe - 0.5 %) and Geobacter (1 % - inoculum 18 % - EGSB-Fe). Furthermore, the enrichment of genera that degrade LAS and/or aromatic compounds (3.8 % - inoculum 29.6 % – EGSB-Fe of relative abundance) was observed for a total of 20 different genera.
| PRJEB15116 | ENA
Project description:The use of artificial neural networks (ANNs) is proposed to optimize the formulation of stable oil-in-water emulsions (oil 6% w/w) with a flour made from orange by-products (OBF), rich in pectins (21 g/100 g fresh matter), in different concentrations (0.95, 2.38, and 3.40% w/w), combined with or without soy proteins (0.3 and 0.6% w/w). Emulsions containing OBF were stable against coalescence and flocculation (with 2.4 and 3.4% OBF) and creaming (3.4% OBF) for 24 h; the droplets’ diameter decreased up to 44% and the viscosity increased up to 37% with higher concentrations of OBF. With the protein addition, the droplets’ diameter decreased by up to 70%, and flocculation increased. Compared with emulsions produced with purified citrus pectins (0.2 and 0.5% w/w), OBF emulsions exhibited up to 32% lower viscosities, 129% larger droplets, and 45% smaller Z potential values. Optimization solved with ANNs minimizing the droplet size and the emulsion instability resulted in OBF and protein concentrations of 3.16 and 0.14%, respectively. The experimental characteristics of the optimum emulsion closely matched those predicted by ANNs demonstrating the usefulness of the proposed method.
| S-EPMC9739075 | biostudies-literature
Project description:This study investigates the antioxidant behaviors of a hazelnut tetrapeptide, FSEY (Phe-Ser-Glu-Tyr), in an oil-in-water emulsion. The emulsion was prepared with stripped hazelnut oil at a ratio of 10%. O/W emulsions, both with and without antioxidants (FSEY and TBHQ), were incubated at 37 °C. The chemical stabilities, including those of free radicals and primary and secondary oxidation productions, along with the physical stabilities, which include particle size, zeta-potential, color, pH, and ΔBS, were analyzed. Consequently, FSEY displayed excellent antioxidant behaviors in the test system by scavenging free lipid radicals. Both primary and secondary oxidation products were significantly lower in the FSEY groups. Furthermore, FSEY assisted in stabilizing the physical structure of the emulsion. This antioxidant could inhibit the increase in particle size, prevent the formation of creaming, and stabilize the original color and pH of the emulsion. Consequently, FSEY may be an effective antioxidant additive to use in emulsion systems.
| S-EPMC8234661 | biostudies-literature
Project description:How to maintain the physicochemical stability of oil emulsion has been one of the major challenges in food industry. Previously we reported the demulsification effects of catalase in the fish oil emulsion. In comparison, the influences of other two metal ion-containing oxidoreductases, horseradish peroxidase (HRP) and copper/zinc superoxide dismutase (SOD), on the emulsion's stability were investigated. Submicron fish oil-in-water emulsion stabilized by polysorbate 80 was prepared by high-speed homogenization. Its physical stability was evaluated by visual and microscopic observation, turbidity and light scattering measurements, while chemical stability by the hydroperoxide content and lipid peroxidation. HRP demulsified the emulsion in a concentration-responsive manner after 3-7 days' incubation, resulting in a decreased turbidity and significant delamination. The enlargement of oil-polysorbate droplets and protein precipitates were confirmed by size distribution and TEM observation. HRP initially elevated the emulsion's hydroperoxide then decreased it while raising TBARS levels during 7-Day incubation. In contrary, SOD stabilized the emulsion physically and chemically. The demulsification was correspondingly attributed to the oxidation catalyzing activity of the peroxidase and the electrostatic and hydrophobic interaction between lipids and proteins. This study adds new insight to the influences of the two oxidoreductases on the stability, lipids and peroxides of food emulsions, proposes an exciting subject of elucidating the underlying mechanism.
| S-EPMC9226006 | biostudies-literature
Project description:Foams are widely used to remove liquid loading at the bottom of gas wells to improve natural gas production. However, it becomes ineffective when a gas well contains a large amount of hydrocarbon condensate because oil will rupture the foams. In this work, condensate oil-tolerant foams were developed and stabilized by a mixture of cocamidopropyl hydroxyl sulfobetaine (CHSB) and sodium dodecyl sulfate (SDS). The foam properties are examined at different temperatures under atmospheric conditions and high pressures with various contents of condensate oil. It is found that the foam stability is improved when the oil content is increased; in addition, high temperature, high salinity, and high pressure are beneficial for foam stabilizing. To reveal the mechanism of stable foam in the presence of high content of oil, a confocal microscope was employed to visualize oil-foam interactions. It was observed that the high stability of the SDS-CHSB foams is ascribed to the formation of stable pseudoemulsion between oil droplets and the gas-liquid interface. Such condensate oil-tolerant foams show promising potential to be used in the foam-assisted lift process during natural gas production.
| S-EPMC6647952 | biostudies-literature
Project description:BackgroundExplosive puffing can induce changes in the chemical, nutritional, and sensory quality of red ginseng. The antioxidant properties of ethanolic extracts of red ginseng and puffed red ginseng were determined in bulk oil and oil-in-water (O/W) emulsions.MethodsBulk oils were heated at 60°C and 100°C and O/W emulsions were treated under riboflavin photosensitization. In vitro antioxidant assays, including 2,2-diphenyl-1-picrylhudrazyl, 2,2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid, ferric reducing antioxidant power, total phenolic content, and total flavonoid content, were also performed.ResultsThe total ginsenoside contents of ethanolic extract from red ginseng and puffed red ginseng were 42.33 mg/g and 49.22 mg/g, respectively. All results from above in vitro antioxidant assays revealed that extracts of puffed red ginseng had significantly higher antioxidant capacities than those of red ginseng (p < 0.05). Generally, extracts of puffed red and red ginseng had high antioxidant properties in riboflavin photosensitized O/W emulsions. However, in bulk oil systems, extracts of puffed red and red ginseng inhibited or accelerated rates of lipid oxidation, depending on treatment temperature and the type of assay used.ConclusionAlthough ethanolic extracts of puffed red ginseng showed stronger antioxidant capacities than those of red ginseng when in vitro assays were used, more pro-oxidant properties were observed in bulk oils and O/W emulsions.
| S-EPMC6026360 | biostudies-literature
Project description:Despite the widespread application of ultrasmall nanosilica, solving its aggregation problem during the preparation process remains a challenge. In this paper, ultrasmall nanosilica with a controllable size and aggregates were prepared through the water-in-oil (W/O) emulsion method by using polyisobutylene succinic anhydride-type polymeric surfactants (PIBSA-X) as an isolating agent. PIBSA-X polymeric surfactants with different hydrophilic groups were prepared using industrial-grade PIBSA, which can form stable W/O-type emulsions well. Subsequently, the W/O-type emulsion droplets were used as reactors and tetraethyl orthosilicate was hydrolyzed under ammonia alkaline conditions to synthesize ultrasmall nanosilica (10 nm). Furthermore, the morphological evolution of nanosilica aggregates can be tuned by varying the oil/water ratio, which controls the emulsion droplets. A possible mechanism is proposed to explain why the emulsion method approach affords nanosilica aggregates with various morphologies and pellet size in water-in-oil (W/O-type) emulsion droplets. This study provides a precise and simple synthetic method for the development of ultrasmall nanosilica, which has good potential to be industrialized.
| S-EPMC10688208 | biostudies-literature