Cerium Oxide on a Fluorinated Carbon-Based Electrode as a Promising Catalyst for Hypochlorite Production
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC9608405 | biostudies-literature | 2022 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Hydroxylammonium nitrate (HAN) is an energetic ionic liquid which is fast emerging as a promising environmentally friendly, high performing monopropellant for space propulsion application. The high performance due to the higher adiabatic temperature for HAN based compositions also poses challenges as high temperature tolerant catalysts have to be developed for its decomposition. A novel cobalt doped cerium oxide based catalyst has been prepared by the co-precipitation route and characterized by SEM/EDS, XRD, and XPS. The effectiveness of the catalyst in decomposing HAN has been tested using thermo-analytical techniques. An evolved gas analysis (EGA) to examine decomposition products and the possible reaction mechanism was also performed using the hyphenated DTA-TG-FTIR technique. Formation of an in situ Ce3+/Ce4+ ion couple in ceria during co-precipitation was found to be critical in deciding the reactivity of HAN decomposition over the catalyst. The activity of the catalyst was also examined in a batch reactor for its longevity. The prepared catalyst was found to be more versatile and durable than a hitherto reported alumina supported iridium catalyst in the present studies.
| S-EPMC9081081 | biostudies-literature
Project description:Carbon composite is one of the most competitive electrode materials for supercapacitor, and improving its energy density remains a significant challenge. The copper oxide/carbon composites with high specific surface area were prepared from the cellulose aerogel loaded with copper salts. The copper oxide/carbon composite electrode material, deriving from copper sulfate, reached a specific capacitance of 1001 F g-1 at 2 A g-1, with an energy density of 139.0 W h kg-1. After 500 cycles, the capacitance retention rate is 98.06%. An asymmetric supercapacitor was assembled using this material as positive electrode material, activated carbon as negative electrode material, and 3.0 M KOH as electrolyte. It exhibited good reversible capacity and low voltage drop loss within a voltage window of 0-1.2 V, and its specific capacitance and energy density achieved 125 F g-1 and 6.3 W h kg-1 at a current density of 0.1 A g-1, respectively.
| S-EPMC11873543 | biostudies-literature
Project description:Pitch-based graphene oxide (p-GO) whose compositional/structural features are comparable to those of graphene oxide (GO) was firstly produced by chemical exfoliation of pitch-based carbon fiber rather than natural graphite. Incorporation of p-GO as nanofillers into poly(methyl methacrylate) (PMMA) as a matrix polymer resulted in excellent mechanical reinforcement. p-GO/PMMA nanocomposite (1 wt.-% p-GO) demonstrated 800% higher modulus of toughness of neat PMMA.
| S-EPMC4648413 | biostudies-literature
Project description:Four different nanoshapes of cerium dioxide have been prepared (polycrystals, rods, cubes, and octahedra) and have been decorated with different metals (Ru, Pd, Au, Pt, Cu, and Ni) by incipient wetness impregnation (IWI) and ball milling (BM) methods. After an initial analysis based on oxygen consumption from CO2 pulse chemisorption, Ni-like metal, and two forms of CeO2 cubes and rods were selected for further research. Catalysts were characterized using the Brunauer-Emmett-Teller formula (BET), X-ray spectroscopy (XRD), Raman spectroscopy, scanning electron microscopy (SEM), UV–visible spectrophotometry (UV-Vis), X-ray photoelectron spectroscopy (XPS), temperature programmed reduction (H2-TPR) and CO2 pulse chemisorption, and used to reduce of CO2 into CO (CO2 splitting). Adding metals to cerium dioxide enhanced the ability of CeO2 to release oxygen and concomitant reactivity toward the reduction of CO2. The effect of the metal precursor and concentration were evaluated. The highest CO2 splitting value was achieved for 2% Ni/CeO2-rods prepared by ball milling using Ni nitrate (412 µmol/gcat) and the H2 consumption (453.2 µmol/gcat) confirms the good redox ability of this catalyst.
| S-EPMC10095831 | biostudies-literature
Project description:The effect of oxide coating on the activity of a copper-zinc oxide-based catalyst for methanol synthesis via the hydrogenation of carbon dioxide was investigated. A commercial catalyst was coated with various oxides by a sol-gel method. The influence of the types of promoters used in the sol-gel reaction was investigated. Temperature-programmed reduction-thermogravimetric analysis revealed that the reduction peak assigned to the copper species in the oxide-coated catalysts prepared using ammonia shifts to lower temperatures than that of the pristine catalyst; in contrast, the reduction peak shifts to higher temperatures for the catalysts prepared using L(+)-arginine. These observations indicated that the copper species were weakly bonded with the oxide and were easily reduced by using ammonia. The catalysts prepared using ammonia show higher CO₂ conversion than the catalysts prepared using L(+)-arginine. Among the catalysts prepared using ammonia, the silica-coated catalyst displayed a high activity at high temperatures, while the zirconia-coated catalyst and titania-coated catalyst had high activity at low temperatures. At high temperature the conversion over the silica-coated catalyst does not significantly change with reaction temperature, while the conversion over the zirconia-coated catalyst and titania-coated catalyst decreases with reaction time. From the results of FTIR, the durability depends on hydrophilicity of the oxides.
| S-EPMC5458915 | biostudies-other
Project description:This paper presents perovskite solar cells employed with WO3 nanoparticles embedded carbon top electrode. WO3 nanoparticles works as an inorganic hole-transport material (HTM) to promote the hole-extraction in the perovskite/carbon interface as revealed by efficiency, electrochemical impedance and external quantum efficiency measurements. As a result, a 40% enhancement of energy conversion efficiency has been achieved compared to the reference devices with the energy conversion efficiency of 10.77% under standard conditions. In addition, the Li-TFSI can modify the interface between electron-transport material (ETM) and perovskite, which may inhibit the recombination at the ETM/perovskite interface. The VOC of devices upon the modification of Li-TFSI is increased from 887.9 to 934.2 mV. This work highlights about the enlightenment of the effective performance of carbon-based mesoscopic PSCs by the introduction of HTM and the modification of interfaces.
| S-EPMC6584654 | biostudies-literature
Project description:Stability of cathode catalyst support material is one of the big challenges of polymer electrolyte membrane fuel cells (PEMFC) for long term applications. Traditional carbon black (CB) supports are not stable enough to prevent oxidation to CO₂ under fuel cell operating conditions. The feasibility of a graphitized carbon (GC) as a cathode catalyst support for low temperature PEMFC is investigated herein. GC and CB supported Pt electrocatalysts were prepared via an already developed polyol process. The physical characterization of the prepared catalysts was performed using transmission electron microscope (TEM), X-ray Powder Diffraction (XRD) and inductively coupled plasma optical emission spectrometry (ICP-OES) analysis, and their electrochemical characterizations were conducted via cyclic voltammetry(CV), rotating disk electrode (RDE) and potential cycling, and eventually, the catalysts were processed using membrane electrode assemblies (MEA) for single cell performance tests. Electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SEM) have been used as MEA diagonostic tools. GC showed superior stability over CB in acid electrolyte under potential conditions. Single cell MEA performance of the GC-supported catalyst is comparable with the CB-supported catalyst. A correlation of MEA performance of the supported catalysts of different Brunauer⁻Emmett⁻Teller (BET) surface areas with the ionomer content was also established. GC was identified as a promising candidate for catalyst support in terms of both of the stability and the performance of fuel cell.
| S-EPMC6025507 | biostudies-other
Project description:A novel signal-amplified electrochemical assay for the determination of fenitrothion was developed, based on the redox behaviour of organophosphorus pesticides on a glassy carbon working electrode. The electrode was modified using graphene oxide dispersion. The electrochemical response of fenitrothion at the modified electrode was investigated using cyclic voltammetry, current-time curves, and square-wave voltammetry. Experimental parameters, namely the accumulation conditions, pH value, and volume of dispersed material, were optimised. Under the optimum conditions, a good linear relationship was obtained between the oxidation peak current and the fenitrothion concentration. The linear range was 1-400 ng·mL(-1), with a detection limit of 0.1 ng·mL(-1) (signal-to-nose ratio = 3). The high sensitivity of the sensor was demonstrated by determining fenitrothion in pakchoi samples.
| S-EPMC4802211 | biostudies-literature
Project description:Side effect of radiation therapy (RT) remains the most challenging issue for pancreatic cancer treatment. In this report we determined whether and how cerium oxide nanoparticles (CONPs) sensitize pancreatic cancer cells to RT. CONP pretreatment enhanced radiation-induced reactive oxygen species (ROS) production preferentially in acidic cell-free solutions as well as acidic human pancreatic cancer cells. In acidic environments, CONPs favor the scavenging of superoxide radical over the hydroxyl peroxide resulting in accumulation of the latter whereas in neutral pH CONPs scavenge both. CONP treatment prior to RT markedly potentiated the cancer cell apoptosis both in culture and in tumors and the inhibition of the pancreatic tumor growth without harming the normal tissues or host mice. Taken together, these results identify CONPs as a potentially novel RT-sensitizer as well as protectant for improving pancreatic cancer treatment.Pancreatic tumors remain some of the most notoriously treatment-unresponsive malignancies. Cerium oxide nanoparticles may be capable of sensitizing such cells to radiotherapy, as demonstrated in this study.
| S-EPMC3606274 | biostudies-literature
Project description:We present a simple, low-cost method for producing activated-carbon materials from sugarcane tips (ST) via two-step pre-carbonization and KOH activation treatment. After optimizing the amount of KOH, the resulting ST-derived activated carbon prepared with a KOH to PC-ST mass ratio of 2 (ACST-2) contained 17.04 wt% oxygen and had a large surface area of 1206.85 m2 g-1, which could be attributed to the large number of micropores in ACST-2. In a three-electrode system, the ACST-2 electrode exhibited a high specific capacitance of 259 F g-1 at 0.5 A g-1 and good rate capability with 82.66% retention from 0.5 to 10 A g-1. In addition, it displayed a high capacitance retention of 89.6% after 5000 cycles at a current density of 3 A g-1, demonstrating excellent cycling stability. Furthermore, the ACST-2//ACST-2 symmetric supercapacitor could realize a high specific energy density of 7.93 W h kg-1 at a specific power density of 100 W kg-1 in 6 M KOH electrolyte. These results demonstrate that sugarcane tips, which are inexpensive and easily accessible agricultural waste, can be used to create a novel biomass precursor for the production of low-cost activated carbon materials for high-performance supercapacitors.
| S-EPMC9038012 | biostudies-literature