Dataset Information

Crystallization Behavior of Poly(ε-Caprolactone)-Hollow Glass Microspheres Composites for Rotational Molding Technology.

ABSTRACT: Composites suitable for rotational molding technology based on poly(ε-caprolactone) (PCL) and filled with hollow glass microspheres (HGM) or functionalized hollow glass microspheres (HGMf) were prepared via melt-compounding. The functionalization of glass microspheres was carried out by a silanization treatment in order to improve the compatibility between the inorganic particles and the polymer matrix and achieve a good dispersion of glass microspheres in the matrix and an enhanced filler-polymer adhesion. The crystallization behavior of materials was studied by DSC under isothermal and non-isothermal conditions and the nucleating effect of the glass microspheres was proven. In particular, the presence of silanized glass microspheres promoted faster crystallization rates and higher nucleation activity, which are enhanced by 75% and 50%, respectively, comparing neat PCL and the composite filled with 20 wt% HGMf. The crystalline and supermolecular structure of PCL and composites crystallized from the melt was evaluated by WAXD and SAXS, highlighting differences in terms of crystallinity index and structural parameters as a function of the adopted crystallization conditions.

SUBMITTER: Vignali A

PROVIDER: S-EPMC9609941 | biostudies-literature | 2022 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Crystallization Behavior of Poly(ε-Caprolactone)-Hollow Glass Microspheres Composites for Rotational Molding Technology.

Vignali Adriano A Utzeri Roberto R Canetti Maurizio M Bertini Fabio F

Polymers 20221014 20

Composites suitable for rotational molding technology based on poly(ε-caprolactone) (PCL) and filled with hollow glass microspheres (HGM) or functionalized hollow glass microspheres (HGMf) were prepared via melt-compounding. The functionalization of glass microspheres was carried out by a silanization treatment in order to improve the compatibility between the inorganic particles and the polymer matrix and achieve a good dispersion of glass microspheres in the matrix and an enhanced filler-polym ...[more]

PMID: 36297902

Similar Datasets

Project description:The design and development of thermal insulation materials is very important for the treatment of offshore oil pipelines. Understanding thermal energy transport in thermal insulation materials and predicting their thermal conductivities have important theoretical and practical value for the design of thermal insulation materials. In this work, lightweight and thermally insulated (LWTI) composites with the desired mechanical strength for offshore oil pipelines applications were prepared using epoxy resin (EP) as the matrix and hollow glass microspheres (HGMs) as the filler. The morphology, density, and mechanical properties of HGM/EP LWTI composites were studied first. The flexural strength and the flexural modulus of HGM/EP LWTI composites could still be as high as 22.34 ± 2.75 Mpa and 1.34 ± 0.03 GPa, respectively, while the density was only 0.591 g/cm3. The relationship between the effective thermal conductivity of HGM/EP LWTI composites and material parameters (sizes and contents together) has been studied systematically. A three-phase prediction model was built using the self-consistent approximation method to predict the effective thermal conductivity of HGM/EP LWTI composites, and the resin matrix, the wall thickness, the HGM particle size, and other parameters (such as air) were fully considered during the derivation of this three-phase thermal conductivity model. Finally, the insulation mechanism of HGM/EP LWTI composites was systematically analyzed. The thermal conductivities of HGM/EP LWTI composites with different diameters and HGM contents calculated by the three-phase prediction model agreed well with the experimental test results, with a minimum error of only 0.69%. Thus, this three-phase thermal conductivity model can be used to theoretically simulate the thermal conductivity of epoxy resin-based LWTI composites and can be the theoretical basis for the design and prediction of the thermal conductivity of other similar hollow spheres filled materials.

Project description:Vascular endothelial growth factor (VEGF) is the major regulating factor for the formation of new blood vessels, also known as angiogenesis. VEGF is often incorporated in synthetic scaffolds to promote vascularization and to enhance the survival of cells that have been seeded in these devices. Such applications require sustained local delivery of VEGF of around 4 weeks for stable blood vessel formation. Most delivery systems for VEGF only provide short-term release for a couple of days, followed by a release phase with very low VEGF release. We now have developed VEGF-loaded polymeric microspheres that provide sustained release of bioactive VEGF for 4 weeks. Blends of two swellable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone)-b-poly(l-lactide) ([PCL-PEG-PCL]-b-[PLLA])-based multiblock copolymers with different PEG content and PEG molecular weight were used to prepare the microspheres. Loading of the microspheres was established by a solvent evaporation-based membrane emulsification method. The resulting VEGF-loaded microspheres had average sizes of 40-50 μm and a narrow size distribution. Optimized formulations of a 50:50 blend of the two multiblock copolymers had an average VEGF loading of 0.79 ± 0.09%, representing a high average VEGF loading efficiency of 78 ± 16%. These microspheres released VEGF continuously over 4 weeks in phosphate-buffered saline pH 7.4 at 37 °C. This release profile was preserved after repeated and long-term storage at -20 °C for up to 9 months, thereby demonstrating excellent storage stability. VEGF release was governed by diffusion through the water-filled polymer matrix, depending on PEG molecular weight and PEG content of the polymers. The bioactivity of the released VEGF was retained within the experimental error in the 4-week release window, as demonstrated using a human umbilical vein endothelial cells proliferation assay. Thus, the microspheres prepared in this study are suitable for embedment in polymeric scaffolds with the aim of promoting their functional vascularization.

Dataset Information

Crystallization Behavior of Poly(ε-Caprolactone)-Hollow Glass Microspheres Composites for Rotational Molding Technology.

Publications

Crystallization Behavior of Poly(ε-Caprolactone)-Hollow Glass Microspheres Composites for Rotational Molding Technology.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets