Characterization Method for the Swelling Effect of an Insulating Washing Agent on Silicone Rubber in Power Systems
Ontology highlight
ABSTRACT:
SUBMITTER: Wu T
PROVIDER: S-EPMC9685778 | biostudies-literature | 2022 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In view of the development direction of high power and miniaturization of high-voltage power supply, higher requirements are put forward for the breakdown strength, thermal conductivity of packaging materials for its high voltage output module. An electric-insulated heat-conducted material with aluminium nitride as heat conducting filler and addition-cure liquid silicone rubber (ALSR) as matrix for high voltage power encapsulation has been studied. Initially, the thermal conductivity and breakdown strength of composites were explored at different filler fractions. With increase of filler fraction, the thermal conductivity increased and the breakdown strength decreased. Then, with the packaging module volume as the optimization objective and the working temperature as the optimization condition, the temperature distribution of high voltage power supply was studied by using the finite element method, and 40wt% filling fraction was selected as the optimal ratio. Finally, the actual packaging experiment of the high voltage module is carried out. and the variation of the output voltage and temperature with the working time is obtained. According to the experimental results, the output voltage of the high voltage module is basically stable, and the maximum surface temperature is 40.4°C. The practicability of the electric-insulated heat-conducted material has been proved.
| S-EPMC8168877 | biostudies-literature
Project description:WO3 and silicone rubber (SR)-based gasochromic composites were fabricated to detect hydrogen leaks at room temperature. WO3 rod-like nanostructures were uniformly distributed in the SR matrix, with a particle size of 60-100 nm. The hydrogen permeability of these composites reached 1.77 cm3·cm/cm2·s·cmHg. At a 10% hydrogen concentration, the visible light reflectance of the composite decreased 49% during about 40 s, with a color change rate of 6.4% s-1. Moreover, the composite detected hydrogen concentrations as low as 0.1%. And a color scale was obtained for easily assessing hydrogen concentrations in the environment based on the color of composites. Finally, the composite materials as disposable sensors underwent testing at several Sinopec hydrogen refueling stations.
| S-EPMC11314044 | biostudies-literature
Project description:ObjectiveTo investigate the usefulness of addition type liquid silicone rubber (ATLSR) as injectable implant after evisceration to maintain the eyeball volume in an animal experiment.MethodsTwelve adult New Zealand white rabbits were included. One eye of each rabbit was randomly selected for evisceration with the fellow eye as control. ATLSR was injected to fill the eyeball socket after evisceration. In vivo observation and photographs were performed up to 24 weeks post-op. Two rabbits were sacrificed respectively at post-operative week 1, 2, 4, 8, 12 and 24. After enucleation, the vertical, horizontal and sagittal diameters of the experimental eyeballs were measured and compared with the control eyes. Histopathological studies were performed to evaluate signs of inflammation.ResultsCornea remained clear throughout the observation period despite mild epithelial edema and neovascularization. Compared to the control eyes, the experimental eyes were significantly smaller in vertical diameter (17.00±1.17 vs. 17.54±1.11 mm, P<0.001), but larger in sagittal diameter (16.85±1.48 vs. 16.40±1.38 mm, P = 0.008), and had no significant difference in horizontal diameter (17.49±1.53 vs. 17.64±1.21 mm, P = 0.34). Postoperative inflammation was observed at one week after surgery, which peaked at 2-3 weeks, then regressed gradually. At week 12 and week 24, most of the inflammatory cells disappeared with some residual plasma cells and eosinophils.ConclusionInjectable addition type silicon rubber may be a good choice for ocular implantation after evisceration, maintaining eyeball volume and cosmetically satisfactory when compared to the fellow eye. Spontaneous regression of inflammation implied good biocompatibility for at least 24 weeks.
| S-EPMC5866100 | biostudies-literature
Project description:In this paper, dynamic fatigue crack propagation properties of natural rubber/silicone rubber (NR/VMQ) composites are studied under constant tearing energy (G) input. Through dynamic fatigue crack growth testing, it is found that with the increase of VMQ fraction, NR/VMQ exhibits a lower crack growth rate (dc/dN). The viscoelastic parameters have been recorded in real-time during crack propagation, including the storage modulus E', loss factor tan δ, and loss compliance modulus J'', and their relationships with crack propagation behaviour have been established. The improved crack propagation resistance is attributed to the reduced J'', resulting from the synergistic effect of increased E' and decreased tan δ, and thus more energy dissipation occurred in the linear viscoelastic region in front of the crack tip, which consumed part of the energy for crack growth. Finally, good correlation between dc/dN and J'' could be successfully established.
| S-EPMC9088555 | biostudies-literature
Project description:Asymmetric hybrid nanoparticles are at the forefront of colloidal chemistry as building blocks for novel structures and applications, as well as for exploring fundamental ways of breaking symmetry in physical systems. Current methods of synthesis have significant limitations in terms of control over synthesis, particle size ranges and polydispersity. We report a facile and scalable synthesis based on the anisotropic swelling of rubber to obtain metal-(polymer rubber) hybrid nanoparticles. Initial Au nanoparticle (NP) seeds are grown larger by reducing HAuCl4 with divinyl benzene (DVB), while simultaneous radical polymerization of DVB forms a cross-linked rubber layer of PDVB on the Au NP surface. The propensity of rubber to swell nonlinearly in the presence of DVB monomers amplifies initial asymmetries to break the symmetry of the PDVB shell, causing growth of asymmetric protrusions on one side of the core-shell particles, which are fixed by further polymerization. Plasmonic absorption of Au allows us to follow the Au reduction reaction and also suggests potential applications of some of the asymmetric particles in plasmon-enhanced sensing. The polydispersity, determined statistically from TEM and SEM images, of the resulting particles is low (<10%) and their sizes, shapes and metal-polymer ratios are easily tunable.
| S-EPMC4894071 | biostudies-literature
Project description:How to effectively enhance the antitracking performance of silicone rubber is a huge challenge in the field of high-voltage insulation. In this contribution, amine-containing MQ silicone resin (A-MQ) was prepared to enhance the tracking and erosion resistance of addition-cure liquid silicone rubber (ALSR). The results showed that A-MQ imparted ALSR with excellent tracking and erosion resistance. When A-MQ content was 4 phr, all test samples passed the inclined plane test at 4.5 kV, and the erosion mass decreased by 67.8%. In addition, the tensile strength and tear strength increased by 13.2 and 13.6%, respectively, compared with that of ALSR without A-MQ. The suppression mechanism was further investigated in the aspects of heat attack and plasma bombardment by laser Raman spectroscopy, thermogravimetry, thermogravimetry-Fourier transform infrared spectrometry, scanning electron microscopy, attenuated total reflection-Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. This revealed that at the elevated temperature caused by arc discharge, A-MQ promoted crosslinking of the polysiloxane molecules and suppressed the generation of cyclic oligomers, which reduced the intensity of the electrical arc. Moreover, when suffering from plasma bombardment, which was also produced by arc discharge, A-MQ protected the silicone chains from degradation and eliminated the carbon deposited on the surface.
| S-EPMC6641718 | biostudies-literature
Project description:This study explores the impact of butadiene rubber (BR) crystallization on the low-temperature properties of butadiene/silicone (VMQ) rubber blends (BR/VMQ) designed for Martian applications. Two types of BR, semi-crystalline high-cis Buna CB24 and amorphous Buna CB550, were blended with VMQ, and their mechanical and thermal properties were evaluated. Kinetics of vulcanization, static mechanical properties, dynamical mechanical analysis, thermal shrinkage, and differential scanning calorimetry were utilized. The research demonstrates that the semi-crystalline BR improves mechanical properties but induces greater shrinkage at low temperatures. Conversely, using amorphous BR provided more consistent mechanical properties across the Martian temperature range and reduced material shrink by 6.71% for samples with carbon black, by 8.36% for samples with silica, and by 11.63% for unfilled samples. Future research will be required to evaluate the impact of volume change on the sealing properties of the BR/VMQ blends.
| S-EPMC11478136 | biostudies-literature
Project description:The ablative properties of epoxy-modified vinyl silicone rubber (EMVSR) composites containing hexaphenoxycyclotriphosphonitrile (HPCTP) have been systematically studied. The strength of the ablation char layer was greatly enhanced with the addition of HPCTP, which induced the formation of a more complete, denser, and thicker char during oxyacetylene ablation tests. Moreover, the HPCTP-containing EMVSR composites demonstrated lower thermal conductivity and pyrolysis rate when compared with those without HPTCP. At the same time, the thermal insulation properties of HPCTP-filled composites were improved under low heat flow ablation scenarios. The reduction of graphitic carbon content, the formation of phosphate-like crystals as well as the increase of SiC content contributed to strengthening the char layer, which was critical for improving the ablation properties. The optimum char layer strength and thermal insulation properties were achieved when the content of HPCTP was 15 phr, whereas an optimum ablation resistance was achieved at 25 phr HPCTP. This suggests that HPCTP-modified EMVSR composites can be used for thermal protection purposes, especially in the fields of aerospace and aeronautics.
| S-EPMC9920970 | biostudies-literature
Project description:Biomedical devices are indispensable in modern medicine yet offer surfaces that promote bacterial attachment and biofilm formation, resulting in acute and chronic healthcare-associated infections. We have developed a simple method to graft acrylates to silicone rubber, polydimethylsiloxane (PDMS), a commonly used device material that is often colonized by bacteria. We demonstrate a novel method whereby nontoxic bacteria attachment-resistant polymers can be readily grafted from and grafted to the surface using thiol-ene chemistry, substantially reducing bacterial colonization. With use of this approach, bacterial biofilm coverage can be reduced by 99% compared with standard PDMS in an in vitro assay. This grafting approach offers significant advantages over commonly used physisorbed coatings, especially in areas of high shear or mechanical stress. Furthermore, the approach is versatile such that the grafted material properties can be tailored for the desired final application.
| S-EPMC5138009 | biostudies-literature
Project description:Development of biofilm associated candidemia for patients with implanted biomaterials causes an urgency to develop antimicrobial and biofilm inhibitive coatings in the management of recalcitrant Candida infections. Recently, there is an increase in the number of patients with biofilm formation and resistance to antifungal therapy. Therefore, there is a growing interest to use essential oils as coating agents in order to prevent biomaterial-associated Candida infections. Often high costs, complicated and laborious technologies are used for both applying the coating and determination of the antibiofilm effects hampering a rapid screening of essential oils. In order to determine biofilm formation of Candida on essential oil coated surfaces easier, cheaper and faster, we developed an essential oil (lemongrass oil) coated surface (silicone-rubber) by using a hypromellose ointment/essential oil mixture. Furthermore, we modified the "crystal violet binding assay" to quantify the biofilm mass of Candida biofilm formed on the lemongrass oil coated silicone rubber surface. The essential oil coating and the biomass determination of biofilms on silicone rubber can be easily applied with simple and accessible equipment, and will therefore provide rapid information about whether or not a particular essential oil is antiseptic, also when it is used as a coating agent.
| S-EPMC8005879 | biostudies-literature