Dataset Information

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition.

ABSTRACT: Burning rate of solid propellants can be effectively improved by adding catalysts and using smaller size ammonium perchlorate (AP). Although few reports, the exploration of changing the size of AP primary particles by catalysts is of great significance for improving combustion performance. Here, taking Co-bipy as an example, the potential advantages of such materials as AP decomposition catalysts are reported. Due to the existence of NO₃ ^- combined with oxygen rich environment provided by AP, the structural self-transformation from micronrods to nanoparticles can be quickly realized during the heating process. More importantly, when Co-bipy decomposes, it can play the role of "scalpel" and in situ cut AP particles. Results show that high-temperature decomposition of Co-bipy/AP occurs at 305.8 °C, which is 137.5 °C lower than that of pure AP. Catalytic mechanism is discussed by in situ IR and TG-IR, CoO can effectively increase the content of reactive oxygen species and weaken the N-H bond, realizing the rapid oxidation of NH₃ . Eventually, the behavior of Co-bipy cutting AP particles is tested. This interesting catalyst structure self-transformation behavior can not only realize the influence on AP, but also perform a positive function in the combustion process of solid propellants, such as opening the adhesive AP interface.

SUBMITTER: Zhou P

PROVIDER: S-EPMC9762298 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition.

Zhou Peng P Zhang Siwei S Ren Zhuoqun Z Tang Xiaolin X Zhang Kuan K Zhou Rui R Wu Dan D Liao Jun J Zhang Yifu Y Huang Chi C

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20221030 35

Burning rate of solid propellants can be effectively improved by adding catalysts and using smaller size ammonium perchlorate (AP). Although few reports, the exploration of changing the size of AP primary particles by catalysts is of great significance for improving combustion performance. Here, taking Co-bipy as an example, the potential advantages of such materials as AP decomposition catalysts are reported. Due to the existence of NO<sub>3</sub> <sup>-</sup> combined with oxygen rich environm ...[more]

PMID: 36310148

Similar Datasets

Project description:Cu nanoparticles are more active catalytically than CuO nanoparticles, which have been widely studied as catalysts for organic synthesis, electrochemistry, and optics. However, Cu nanoparticles are easily agglomerated and oxidized in air. In this research, columnar, flower-like, bubble-like and teardrop-shaped Cu/GO nanocomposites were fabricated via a water-solvent thermal method and high temperature calcination technique using deionized water (H2O), methanol (CH3OH), ethanol (CH3CH2OH) and ethylene glycol (EG) as the solvent, respectively. The structures, the morphology and the catalytic performance and catalytic mechanism for thermal decomposition of ammonium perchlorate (AP) of the Cu/GO nanocomposites have been studied by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), nitrogen adsorption tests (BET), simultaneous thermogravimetry-differential scanning calorimetry (TGA/DSC) and thermogravimetric couplet with Fourier transform infrared spectroscopy (TGA-FTIR), respectively. The experimental results show that the morphology of the Cu/GO nanocomposites has a significant effect on the surface area and the teardrop-shaped Cu/GO nanocomposites have the largest specific surface area and the best catalytic performance among them. When 5 wt% of the Cu/GO nanocomposites was added, the decomposition temperature of AP decreased from 426.3 °C to 345.5 °C and the exothermic heat released from the decomposition of AP increased from 410.4 J g-1 to 4159.4 J g-1. In addition, the four morphological Cu/GO nanocomposites exhibited good stability, their catalytic performance for thermal decomposition of AP remained stable after 1 month in air. Excellent catalytic performance and stability were attributed to the strong catalytic activity of pure metal nanoparticles, and GO can accelerate electron movement and inhibit the agglomeration of nanoparticles, as well as the multiple effects of inhibiting the oxidation of Cu nanoparticles in air. Therefore, it has important application potential in high-energy solid propellant.

Dataset Information

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition.

Publications

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets