Dataset Information

Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials.

ABSTRACT: This research focuses on the mechanical properties of polypropylene (PP) blended with recycled PP (rPP) at various concentrations. The rPP can be added at up to 40 wt% into the PP matrix without significantly affecting the mechanical properties. MFI of blended PP increased with increasing rPP content. Modulus and tensile strength of PP slightly decreased with increased rPP content, while the elongation at break increased to up to 30.68% with a 40 wt% increase in rPP content. This is probably caused by the interfacial adhesion of PP and rPP during the blending process. The electrical conductivity of materials was improved by adding carbon black into the rPP matrices. It has a significant effect on the mechanical and electrical properties of the composites. Stress-strain curves of composites changed from ductile to brittle behaviors. This could be caused by the poor interfacial interaction between rPP and carbon black. FTIR spectra indicate that carbon black did not have any chemical reactions with the PP chains. The obtained composites exhibited good performance in the electrical properties tested. Finally, DSC results showed that rPP and carbon black could act as nucleating agents and thus increase the degree of crystallinity of PP.

SUBMITTER: Jamnongkan T

PROVIDER: S-EPMC9781673 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials.

Jamnongkan Tongsai T Intraramongkol Nitchanan N Samoechip Wesarach W Potiyaraj Pranut P Mongkholrattanasit Rattanaphol R Jamnongkan Porntip P Wongwachirakorn Piyada P Sugimoto Masataka M Ito Hiroshi H Huang Chih-Feng CF

Polymers 20221214 24

This research focuses on the mechanical properties of polypropylene (PP) blended with recycled PP (rPP) at various concentrations. The rPP can be added at up to 40 wt% into the PP matrix without significantly affecting the mechanical properties. MFI of blended PP increased with increasing rPP content. Modulus and tensile strength of PP slightly decreased with increased rPP content, while the elongation at break increased to up to 30.68% with a 40 wt% increase in rPP content. This is probably cau ...[more]

PMID: 36559849

Similar Datasets

Project description:The impact of degradation on plastics is a critical factor influencing their properties and behavior, particularly evident in polyethylene (PE) and polypropylene (PP) and their blends. However, the effect of photoaging and thermal degradation, specifically within recycled polyethylene (rPE) and recycled polypropylene (rPP), on the thermo-mechanical and thermostability aspects of these blends remains unexplored. To address this gap, a range of materials, including virgin polyethylene (vPE), recycled polyethylene (rPE), virgin polypropylene (vPP), recycled polypropylene (rPP), and their blends with different ratios, were comprehensively investigated. Through a systematic assessment encompassing variables such as melting flow index (MFI), functional groups, mechanical traits, crystallization behavior, microscopic morphology, and thermostability, it was found that thermo-oxidative degradation generated hydroxyl and carboxyl functional groups in rPE and rPP. Optimal mechanical properties were achieved with a 6:4 mass ratio of rPE to rPP, as validated by FTIR spectroscopy and microscopic morphology. By establishing the chemical model, the changes in the system with an rPE-rPP ratio of 6:4 and 8:2 were monitored by the molecular simulation method. When the rPE-rPP ratio was 6:4, the system's energy was lower, and the number of hydrogen bonds was higher, which also confirmed the above experimental results. Differential scanning calorimetry revealed an increased crystallization temperature in rPE, a reduced crystallization peak area in rPP, and a diminished crystallization capacity in rPE/rPP blends, with rPP exerting a pronounced influence. This study plays a pivotal role in enhancing recycling efficiency and reducing production costs for waste plastics, especially rPE and rPP-the primary components of plastic waste. By uncovering insights into the degradation effects and material behaviors, our research offers practical pathways for more sustainable waste management. This approach facilitates the optimal utilization of the respective performance characteristics of rPE and rPP, enabling the development of highly cost-effective rPE/rPP blend materials and promoting the efficient reuse of waste materials.

Dataset Information

Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials.

Publications

Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets