Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Achieving Persistent Luminescence Performance Based on the Cation-Tunable Trap Distribution.

ABSTRACT: Deep-red persistent luminescence (PersL) materials have promising applications in fluorescence labeling and tracking. PersL spectral range and PersL duration are considered to be the key factors driving the development of high-performance deep-red PersL materials. To address these two key issues, the performance of PersL materials was continually optimized by doping with cations (Si⁴⁺ and Al³⁺ ions), relying on the material of Li₂ZnGe₃O₈:Cr³⁺ from the previous work of our group, and a 4.8-fold increase in PersL radiation spectrum intensity and more than twice the PersL duration was achieved (PersL duration up to 47 h). Ultimately, the obtained PersL materials are used to demonstrate their potential use in multi-level anti-counterfeiting, tracking and localization, respectively. This study provides a unique and novel entry point for achieving high-performance PersL materials by optimizing the PersL material host to modulate the electronic structure.

SUBMITTER: Wang T

PROVIDER: S-EPMC9782221 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Achieving Persistent Luminescence Performance Based on the Cation-Tunable Trap Distribution.

Wang Tao T Li Rui R Zhang Mengya M Li Panlai P Wang Zhijun Z

Materials (Basel, Switzerland) 20221219 24

Deep-red persistent luminescence (PersL) materials have promising applications in fluorescence labeling and tracking. PersL spectral range and PersL duration are considered to be the key factors driving the development of high-performance deep-red PersL materials. To address these two key issues, the performance of PersL materials was continually optimized by doping with cations (Si4+ and Al3+ ions), relying on the material of Li2ZnGe3O8:Cr< ...[more]

PMID: 36556890

Similar Datasets

Tunable long persistent luminescence in the second near-infrared window via crystal field control.

Project description:Construction of an active composite as a biomarker with deeper tissue penetration and higher signal-to-noise ratio (SNR) is of great importance for the application in bioimaging. Here, we report a strategy for tuning the emission bandwidth and intensity via crystal field control in long persistent phosphors (LPPs). Ni2+-doped Zn1+ySnyGa2-x-2yO4 phosphors, with a tunable emission band peaking from 1270 to 1430 nm in the second near-infrared (NIR) window, have been successfully prepared. Such featured materials have the advantages of low absorption and scattering as well as more efficient tissue penetration. The emission spectra can be controlled by tailoring the local crystal field around the activator precisely via substitution of Zn and Sn for Ga. Moreover, with high resolution and weak light disturbance, these developed multi-band afterglow phosphors exhibit great application potential in advanced optical imaging.

| S-EPMC5622036 | biostudies-literature

Achieving gas pressure-dependent luminescence from an AIEgen-based metal-organic framework.

Project description:Materials exhibiting aggregation-induced emission (AIE) behaviour enable strong emission in solid state and can respond to various external stimuli, which may facilitate the development of materials for optical sensing, bioimaging or optoelectronic devices. Herein, we use an AIE luminogen 2',5'-diphenyl-[1,1':4',1"-terphenyl]-4,4"-dicarboxylic acid as the ligand to prepare an AIEgen-based MOF (metal-organic framework) named FJI-H31. FJI-H31 exhibits bright luminescence under ambient conditions (under air and at room temperature), but almost no emission is observed under vacuum. Our investigation shows that the emission intensity displays a smooth and reversible enhancement with increased gas pressure, which may be attributed to the restriction of intramolecular motion brought by structural deformation under pressure stimulus. Unlike most pressure-responsive MOFs, the luminescence reverts to its original state once gas pressure recovers. By virtue of its unique optical properties, a luminescent MOF with sensing ability of gas-pressure is realized.

| S-EPMC9018843 | biostudies-literature

Tunable Luminescence in Sr2MgSi2O7:Tb3+, Eu3+Phosphors Based on Energy Transfer.

Project description:A series of Tb3+, Eu3+-doped Sr2MgSi2O7 (SMSO) phosphors were synthesized by high temperature solid-state reaction. X-ray diffraction (XRD) patterns, Rietveld refinement, photoluminescence spectra (PL), and luminescence decay curves were utilized to characterize each sample's properties. Intense green emission due to Tb3+ 5D4→7F5 transition was observed in the Tb3+ single-doped SMSO sample, and the corresponding concentration quenching mechanism was demonstrated to be a diople-diople interaction. A wide overlap between Tb3+ emission and Eu3+ excitationspectraresults in energy transfer from Tb3+ to Eu3+. This has been demonstrated by the emission spectra and decay curves of Tb3+ in SMSO:Tb3+, Eu3+ phosphors. Energy transfer mechanism was determined to be a quadrupole-quadrupole interaction. And critical distance of energy transfer from Tb3+ to Eu3+ ions is calculated to be 6.7 Å on the basis of concentration quenching method. Moreover, white light emission was generated via adjusting concentration ratio of Tb3+ and Eu3+ in SMSO:Tb3+, Eu3+ phosphors. All the results indicate that SMSO:Tb3+, Eu3+ is a promising single-component white light emitting phosphor.

| S-EPMC5503325 | biostudies-other

The trap bag concept of afterglow luminescence.

Project description:This article explains the behavior of afterglow luminescence using the trap bag concept, in which a constant phosphor dose contains a presumed bag with the ability to capture or release electrons through its opening. Luminescence is emitted as the bag releases the captured electrons. The electron-holding capacity is determined by the irradiation conditions, the width of the opening, and the electron activation; these factors are inherent properties of the long persistent luminescence (PLUM) dose and are affected by the thermal status. During the afterglow stage, higher temperatures may result in a wider opening and increased activation of electrons released from the bag, thus creating a higher light intensity and leading to the quicker exhaustion of the electrons within. In contrast, the opposite phenomenon will occur at lower temperatures. This article provides a detailed explanation of the trap bag concept at various thermal statuses and provides a method for delaying the afterglow peak profile through temperature change. Experimental tests were performed to confirm the proposed concept.

| S-EPMC5559600 | biostudies-other

Achieving EQE of 16,700% in P3HT:PC71BM based photodetectors by trap-assisted photomultiplication.

Project description:We report a trap-assisted photomultiplication (PM) phenomenon in solution-processed polymer photodetectors (PPDs) based on P3HT:PC71BM as the active layer, the maximum EQE of 16,700% is obtained for the PPDs with PC71BM doping weight ratio of 1%. The PM phenomenon is attributed to the enhanced hole tunneling injection assisted by trapped electrons in PC71BM near Al cathode, which can be demonstrated by the transient photocurrent curves and EQE spectra of PPDs with different PC71BM doping ratios. The positive effect of trapped electrons in PC71BM near Al cathode on the hole tunneling injection is further confirmed by the simulated optical field and exciton generation rate distributions in the active layer and the EQE spectra of PPDs with Al(1)/P3HT:PC71BM(100:1)/Al(2) device structure under forward and reverse biases. This discovery may open a new road for organic materials to be used in highly sensitive photodetectors while preserving the advantages of organic materials.

| S-EPMC4361887 | biostudies-literature

Bisphosphonium cation based metal halide glass scintillators with tunable melting points.

Project description:Organic-inorganic metal halide (OIMH) glass offers the advantages of large-scale production, high transparency, and minimal light scattering. However, undesired crystallization in OIMH glass can occur, leading to deteriorated transparency. Herein, a series of bisphosphonium organic cations were designed to construct Mn-based metal halide crystals with a photoluminescence quantum yield (PLQY) near unity, alongside the development of highly thermally stable OIMH glasses. Two strategies were employed to lower the melting point of OIMH: alkyl chain elongation and fluorine substitution. The (Hex-3,4-2F)MnBr4·MeOH (Hex-3,4-2F = hexane-1,6-diylbis((3,4-difluorobenzyl)diphenylphosphonium)) crystal delivers a glass transition temperature of 100 °C and the highest T g/T m ratio (0.82) among OIMHs. The resulting OIMH glass exhibits a PLQY of 47.6%, achieves an impressive resolution of 25 lp mm-1 in X-ray imaging, and remains transparent even after being heated at 90 °C for six weeks. These bisphosphonium-based OIMH glasses present a feasible design for the practical application of OIMH glasses in radiation detection.

| S-EPMC11409857 | biostudies-literature

Chiral europium halides with high-performance magnetic field tunable red circularly polarized luminescence at room temperature.

Project description:Chiral organic-inorganic hybrid metal halides as promising circularly polarized luminescence (CPL) emitter candidates hold great potential for high-definition displays and future spin-optoelectronics. The recent challenge lies primarily in developing high-performance red CPL emitters. Here, coupling the f-f transition characteristics of trivalent europium ions (Eu3+) with chirality, we construct the chiral Eu-based halides, (R/S-3BrMBA)3EuCl6, which exhibit strong and predictable red emission with large photoluminescence quantum yield (59.8%), narrow bandwidth (≈2 nm), long lifetime (≈2 ms), together with large dissymmetry factor |glum| of 1.84 × 10-2. Compared with the previously reported chiral metal halides, these chiral Eu-based halides show the highest red CPL brightness. Furthermore, the degree of photoluminescence polarization in (R/S-3BrMBA)3EuCl6 can be manipulated by the external magnetic field. Particularly, benefiting from the field-generated Zeeman splitting and spin mixing at exciton states, an anomalously positive magneto-photoluminescence was observed at room temperature. This work provides an efficient strategy for constructing both high-performance and pure-red CPL emitters. It also opens the door for chiral rare-earth halides toward chiral optoelectronic and spintronic applications.

| S-EPMC11906753 | biostudies-literature

Full shell coating or cation exchange enhances luminescence.

Project description:Core-shell structure is routinely used for enhancing luminescence of optical nanoparticles, where the luminescent core is passivated by an inert shell. It has been intuitively accepted that the luminescence would gradually enhance with the coverage of inert shell. Here we report an "off-on" effect at the interface of core-shell upconversion nanoparticles, i.e., regardless of the shell coverage, the luminescence is not much enhanced unless the core is completely encapsulated. This effect indicates that full shell coating on the luminescent core is critical to significantly enhance luminescence, which is usually neglected. Inspired by this observation, a cation exchange approach is used to block the energy transfer between core nanoparticle and surface quenchers. We find that the luminescent core exhibits enhanced luminescence after cation exchange creates an effective shell region. These findings are believed to provide a better understanding of the interfacial energy dynamics and subsequent luminescence changes.

| S-EPMC8548508 | biostudies-literature

Color-tunable persistent luminescence in 1D zinc-organic halide microcrystals for single-component white light and temperature-gating optical waveguides.

Project description:Information security of photonic communications has become an important societal issue and can be greatly improved when photonic signals are propagated through active waveguides with tunable wavelengths in different time and space domains. Moreover, the development of active waveguides that can work efficiently at extreme temperatures is highly desirable but remains a challenge. Herein, we report new types of low-dimensional Zn(ii)-organic halide microcrystals with fluorescence and room-temperature phosphorescence (RTP) dual emission for use as 1D color-tunable active waveguides. Benefiting from strong intermolecular interactions (i.e., hydrogen bonds and π-π interactions), these robust waveguide systems exhibit colorful photonic signals and structural stability at a wide range of extreme simulated temperatures (>300 K), that covers natural conditions on Earth, Mars, and the Moon. Both experimental and theoretical studies demonstrate that the molecular self-assembly can regulate the singlet and triplet excitons to allow thermally assisted spectral separation of fluorescence and RTP, in combination with the single-component standard white-light emission. Therefore, this work demonstrates the first use of metal-organic halide microcrystals as temperature-gating active waveguides with promising implications for high-security information communications and high-resolution micro/nanophotonics.

| S-EPMC9242015 | biostudies-literature

Highly stable color-tunable organic long-persistent luminescence from a single-component exciplex copolymer for in vitro antibacterial.

Project description:Developing exciplex-based organic long-persistent luminescence (OLPL) materials with high stability is very important but remains a formidable challenge in a single-component system. Here, we report a facile strategy to achieve highly stable OLPL in an amorphous exciplex copolymer system via through-space charge transfer (TSCT). The copolymer composed of electron donor and acceptor units can not only exhibit effective TSCT for intra/intermolecular exciplex emission but also construct a rigid environment to isolate oxygen and suppress non-radiative decay, thereby enabling stable exciplex-based OLPL emission with color-tunable feature for more than 100 h under ambient conditions. These single-component OLPL copolymers demonstrate robust antibacterial activity against Escherichia coli under visible light irradiation. These results provide a solid example to exploit highly stable exciplex-based OLPL in polymers, shedding light on how the TSCT mechanism may potentially contribute to OLPL in a single-component molecular system and broadening the scope of OLPL applications.

| S-EPMC11342159 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data