Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of a Montmorillonite-Modified Chitosan Film-Loaded Palladium Heterogeneous Catalyst and its Application in the Preparation of Biphenyl Compounds.

ABSTRACT: The natural polymer chitosan was modified with polyvinyl alcohol to enhance the mechanical properties of the membrane, and then, the montmorillonite-modified chitosan-loaded palladium catalyst was prepared using the excellent coordination properties of montmorillonite. The results showed that the catalyst has good tensile strength, thermal stability, catalytic activity, and recycling performance and is a green catalytic material with industrial application potential.

SUBMITTER: Meng Z

PROVIDER: S-EPMC9782881 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation of a Montmorillonite-Modified Chitosan Film-Loaded Palladium Heterogeneous Catalyst and its Application in the Preparation of Biphenyl Compounds.

Meng Zhifei Z Wang Zijian Z Li Yu Y Li Wei W Zheng Kewang K Xiao Zufeng Z Wang Wei W Caiqin Qin Q

Molecules (Basel, Switzerland) 20221216 24

The natural polymer chitosan was modified with polyvinyl alcohol to enhance the mechanical properties of the membrane, and then, the montmorillonite-modified chitosan-loaded palladium catalyst was prepared using the excellent coordination properties of montmorillonite. The results showed that the catalyst has good tensile strength, thermal stability, catalytic activity, and recycling performance and is a green catalytic material with industrial application potential. ...[more]

PMID: 36558118

Similar Datasets

Preparation of alginate-chitosan-cyclodextrin micro- and nanoparticles loaded with anti-tuberculosis compounds.

Project description:This paper describes the synthesis and application of alginate-chitosan-cyclodextrin micro- and nanoparticulate systems loaded with isoniazid (INH) and isoconazole nitrate (ISN) as antimycobacterial compounds. Preparation and morphology of the obtained particles, as well as antimycobacterial activity data of the obtained systems are presented. Docking of isoconazole into the active site of enoyl-acyl carrier protein reductase (InhA) of Mycobacetrium tuberculosis was carried out in order to predict the binding affinity and non-covalent interactions stabilizing the InhA-isoconazole complex. To assess these interactions, frontier molecular orbital calculations were performed for the active site of InhA and isoconazole obtained from docking. Isoconazole was predicted to be an active inhibitor of InhA with the analysis of the molecular docking and electron density distribution. It has been detected that alginate-chitosan-cyclodextrin microparticulate systems loaded with INH and ISN are as effective as pure INH applied in higher dosages.

| S-EPMC5082317 | biostudies-literature

Polyethyleneimine-Modified Polymer as an Efficient Palladium Scavenger and Effective Catalyst Support for a Functional Heterogeneous Palladium Catalyst.

Project description:The polyethyleneimine-modified polymers, polystyrene-divinylbenzene-based (TAs) and polymethacrylate-based polymers (TAm), were used as palladium scavengers to eliminate residual palladium species after palladium on carbon-catalyzed Sonogashira-type coupling reaction. Since both TAs and TAm indicated relatively favorable elimination abilities toward residual palladium species in the reaction mixture, the affinities of TAs and TAm for palladium species were used as supports for palladium catalysts. The TAm-supported palladium catalyst (Pd/TAm) indicated better catalyst properties for the chemoselective hydrogenation compared to those of the corresponding TAs-supported palladium catalyst (Pd/TAs). Aromatic benzyl ethers; aromatic and aliphatic N-Cbzs; and aromatic carbonyl groups were smoothly hydrogenated in the presence of 1-5 mol % of Pd/TAm in MeOH or 2-PrOH. In contrast, the hydrogenation of aromatic ketones was selectively suppressed in morpholine which act as appropriate catalyst poison and solvent. Furthermore, Pd/TAm-catalyzed chemoselective hydrogenation was applicable to continuous-flow reaction.

| S-EPMC6649293 | biostudies-literature

Exploring the Preparation of Albendazole-Loaded Chitosan-Tripolyphosphate Nanoparticles.

Project description:The objective of this study was to improve the solubility of albendazole and optimize the preparation of an oral nanoparticle formulation, using β-cyclodextrin (βCD) and chitosan-tripolyphosphate (TPP) nanoparticles. The solubility of albendazole in buffers, surfactants, and various concentrations of acetic acid solution was investigated. To determine drug loading, the cytotoxic effects of the albendazole concentration in human hepatocellular carcinoma cells (HepG2) were investigated. The formulations were prepared by mixing the drug solution in Tween 20 with the chitosan solution. TPP solution was added dropwise with sonication to produce a nanoparticle through ionic crosslinking. Then the particle size, polydispersity index, and zeta potential of the nanoparticles were investigated to obtain an optimal composition. The solubility of albendazole was greater in pH 2 buffer, Tween 20, and βCD depending on the concentration of acetic acid. Drug loading was determined as 100 µg/mL based on the results of cell viability. The optimized ratio of Tween 20, chitosan/hydroxypropyl βCD, and TPP was 2:5:1, which resulted in smaller particle size and proper zeta positive values of the zeta potential. The chitosan-TPP nanoparticles increased the drug solubility and had a small particle size with homogeneity in formulating albendazole as a potential anticancer agent.

| S-EPMC5455285 | biostudies-other

Preparation and Characterization of Chitosan-Alginate Microspheres Loaded with Quercetin.

Project description:The aim of this paper was to formulate microspheres based on biodegradable polymers (chitosan and sodium alginate), using the complex coacervation technique. Subsequently, the prepared microspheres were loaded with quercetin (QUE), a pharmacological active ingredient insoluble in water and unstable to light, temperature and air. After preparation, the loaded microspheres underwent several studies for physical chemical characterization (performed by scanning electron microscopy-SEM, laser 3D scanning, and thermal analysis-TA). Furthermore, they were analyzed in order to obtain information regarding swelling index, drug entrapment, and in vitro release capacity. The obtained experimental data demonstrated 86.07% entrapment of QUE into the microspheres, in the case of the one with the highest Ch concentration. Additionally, it was proved that such systems allow the controlled release of the active drug over 24 h at the intestinal level. SEM micrographs proved that the prepared microspheres have a wrinkled surface, with compact structures and a large number of folds. On the basis of the TA analysis, it was concluded that the obtained microspheres were thermally stable, facilitating their usage at normal physiological temperatures as drug delivery systems.

| S-EPMC8839549 | biostudies-literature

Preparation of CdS-TiO2-Based Palladium Heterogeneous Nanocatalyst by Solvothermal Route and Its Catalytic Activity for Reduction of Nitroaromatic Compounds.

Project description:In this study, bare CdS nanoparticles (NPs) were prepared by solvothermal method using CdCl2(3-methylbenzaldehyde thiosemicarbazone)2 as a single-source molecular precursor in the presence of ethylene glycol. Further, these CdS NPs were used for the preparation of binary (CdS-TiO2) and ternary (CdS-TiO2/Pd) heterogeneous nanocatalysts. Characterization of the as-prepared nanocatalysts has been carried out using different techniques such as powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy, and photoluminescence studies. The peak observed at 2θ = 39.5° in XRD confirms the successful doping of noble metal (Pd) on the surface of CdS-TiO2 nanocatalyst, which is well supported by Raman analysis. From FESEM and TEM analyses, mixed morphology has been observed and elemental composition was confirmed by energy-dispersive X-ray spectroscopy elemental mapping. Furthermore, the as-prepared bare CdS NPs, binary CdS-TiO2, and ternary CdS-TiO2/Pd heterogeneous nanocatalysts were used for the reductive transformation of various nitroaromatic compounds to their corresponding aromatic amines at room temperature. It has been observed that among all of the catalysts, ternary CdS-TiO2/Pd heterogeneous nanocatalyst has excellent catalytic property to reduce all nitroaromatic compounds in very short time span.

| S-EPMC6751702 | biostudies-literature

Preparation, characterization and application of chitosan/thyme essential oil composite film.

Project description:In order to prepare a chitosan-based antibacterial film with excellent mechanical properties and study its properties, the tape casting method was used to prepare the composite film from chitosan, glycerin and thyme essential oil. Through single factor test and response surface optimization test, the tensile strength and elongation at break were used as response indicators to prepare the composite film with better mechanical properties, and the physical properties, water vapor permeability, solubility and bacteriostasis of the composite film were measured, and the characterization of the microstructure of the composite films. The results showed that the optimized composite film ratio was 1.5% chitosan, 0.5% glycerol, 0.5% thyme essential oil, 18.69 MPa tensile strength, 19.01% elongation at break, 2.52 g/h·m2 water vapor permeability, and 23.78% solubility. The composite film had a good antibacterial effect and increased the DPPH radical scavenging rate to 52.4%. Its overall performance was superior to that of chitosan single film. The chitosan/thyme essential oil composite film can reduce the weight loss rate, hardness loss rate and POD activity of blueberry fruits during storage. Additionally, it effectively inhibits the decline of soluble solids content, anthocyanin content, and Vc content, while slowing the increase of MDA content, thereby maintaining fruit quality and enhancing the fresh-keeping effect. Adding thyme essential oil to prepare composite film provides a reference for the fresh-keeping research of freshly cut fruits and vegetables.

| S-EPMC11885837 | biostudies-literature

Silver-Triggered Activity of a Heterogeneous Palladium Catalyst in Oxidative Carbonylation Reactions.

Project description:A silver-triggered heterogeneous Pd-catalyzed oxidative carbonylation has been developed. This heterogeneous process exhibits high efficiency and good recyclability, and was utilized for the one-pot construction of polycyclic compounds with multiple chiral centers. AgOTf was used to remove chloride ions in the heterogeneous catalyst Pd-AmP-CNC, thereby generating highly active PdII , which results in high efficiency of the heterogeneous catalytic system.

| S-EPMC7463174 | biostudies-literature

Preparation and characterization of a ciprofloxacin-loaded nanoparticles incorporated polymeric film dressing.

Project description:In an effort to prepare a modern polysaccharide-based dressing for sustained/prolonged delivery of the antibacterial agent to prevent and control skin wound infection, ciprofloxacin (CP)-loaded sodium alginate (SA)-chitosan (CS) nanoparticles (NPs) were incorporated into novel arabinoxylan (AX)-pectin (PC) blended polymeric films by solvent casting. The CP-NPs were prepared by a two-step ionic interaction method with < 300 nm size, about 25 mV zeta potential, 74% CP-loading efficiency, and approximately round shape. The CP-NPs were incorporated in optimized AX-PC polymeric film prepared by using 2% AX and 2% PC with a plasticizer (2% glycerol) and then these films were characterized for suitability as a film dressing. The transparency, improved mechanical strength, thermal stability, water transmission, and exudate uptake characteristics indicated that CP-NPs incorporated AX-PC polymeric films were suitable for dressing applications. The CP-NPs incorporated AX-PC films exhibited sustained CP release (90% release in 36 h) and better antibacterial susceptibility as compared to free CP-containing AX-PC films. Thus, CP-NPs incorporated AX-PC films are promising dressing materials to prevent and control wound infection with prolonged antibiotic release.

| S-EPMC11361098 | biostudies-literature

Pd-Loaded Cellulose NanoSponge as a Heterogeneous Catalyst for Suzuki-Miyaura Coupling Reactions.

Project description:The (eco)design and synthesis of durable heterogeneous catalysts starting from renewable sources derived from biomass waste represents an important step for reducing environmental impacts of organic transformations. Herein, we report the efficient loading of Pd(II) ions on an eco-safe cellulose-based organic support (CNS), obtained by thermal cross-linking between TEMPO-oxidized cellulose nanofibers and branched polyethyleneimine in the presence of citric acid. A 22.7% w/w Pd-loading on CNS was determined by the ICP-OES technique, while the metal distribution on the xerogel was evidenced by SEM-EDS analysis. XPS analysis confirmed the direct chelation of Pd(II) ions by means of the high number of amino groups present in the network, so that further functionalization of the support with specific ligands was not necessary. The new composite turned to be an efficient heterogeneous pre-catalyst for promoting Suzuki-Miyaura coupling reactions between aryl halides and phenyl boronic acid in water, obtaining yields higher than 90% in 30 min, by operating in a microwave reactor at 100 °C and with just 2% w/w of CNS-Pd catalyst with respect to aryl halides (4.5‱ for Pd). At the end of first reaction cycle, Pd(II) ions on the support resulted in being reduced to Pd(0) while maintaining the same catalytic efficiency. In fact, no leaching was observed at the end of reactions, and five cycles of recycling and reusing of CNS-Pd catalyst provided excellent results in terms of yields and selectivity in the desired products.

| S-EPMC9778444 | biostudies-literature

Preparation and Evaluation of Novel Emodin-loaded Stearic Acid-g-chitosan Oligosaccharide Nanomicelles.

Project description:The purpose of this study was to prepare and characterize emodin-loaded stearic acid-g-chitosan oligosaccharide (CSO-SA/EMO) and to evaluate its antitumor activity in vitro. In this study, stearic acid-g-chitosan oligosaccharide was used as a carrier and its physicochemical properties were determined by different methods. Cell uptake behavior was examined using FITC-labeled stearic acid-g-chitosan oligosaccharide. CSO-SA/EMO was prepared using ultrasonication and dialysis. Particle size, surface potential, entrapment efficiency, and drug release behavior were studied in vitro. The effects of CSO-SA/EMO on gastric cancer cells were investigated using MTT assay and flow cytometry. Results showed CSO-SA/EMO particle size was larger and potential was smaller than that of stearic acid-g-chitosan oligosaccharide. The 12 h micellar uptake by MGC803 and BGC823 cells was sufficient, and the micelles were able to abundantly accumulate at lesion sites in mice thus achieving good passive EPR targeting. MTT and cell cycle arrest assays showed CSO-SA/EMO-enhanced antitumor activity significantly towards MGC803 and BGC823 cells compared with that of free emodine. Tumor volume, hematoxylin and eosin staining, and terminal deoxynucleotide transferase dUTP nick-end labeling assay proved CSO-SA/EMO had a significant antitumor effect on tumor tissues in vivo. In conclusion, the ultrasonication-dialysis method provided a simple and effective method for preparing CSO-SA/EMO. The delivery of emodine using a micelle system improved its antitumor effects effectively.

| S-EPMC7183521 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data