Dataset Information

Operando analysis of electronic band structure in an all-solid-state thin-film battery.

ABSTRACT: Material characterization that informs research and development of batteries is generally based on well-established ex situ and in situ experimental methods that do not consider the band structure. This is because experimental extraction of structural information for liquid-electrolyte batteries is extremely challenging. However, this hole in the available experimental data negatively affects the development of new battery systems. Herein, we determined the entire band structure of a model thin-film solid-state battery with respect to an absolute potential using operando hard X-ray photoelectron spectroscopy by treating the battery as a semiconductor device. We confirmed drastic changes in the band structure during charging, such as interfacial band bending, and determined the electrolyte potential window and overpotential location at high voltage. This enabled us to identify possible interfacial side reactions, for example, the formation of the decomposition layer and the space charge layer. Notably, this information can only be obtained by evaluating the battery band structure during operation. The obtained insights deepen our understanding of battery reactions and provide a novel protocol for battery design.

SUBMITTER: Hikima K

PROVIDER: S-EPMC9814885 | biostudies-literature | 2022 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Operando analysis of electronic band structure in an all-solid-state thin-film battery.

Hikima Kazuhiro K Shimizu Keisuke K Kiuchi Hisao H Hinuma Yoyo Y Suzuki Kota K Hirayama Masaaki M Matsubara Eiichiro E Kanno Ryoji R

Communications chemistry 20220412 1

Material characterization that informs research and development of batteries is generally based on well-established ex situ and in situ experimental methods that do not consider the band structure. This is because experimental extraction of structural information for liquid-electrolyte batteries is extremely challenging. However, this hole in the available experimental data negatively affects the development of new battery systems. Herein, we determined the entire band structure of a model thin- ...[more]

PMID: 36697852

Similar Datasets

Project description:The substitution of an organic liquid electrolyte with lithium-conducting solid materials is a promising approach to overcome the limitations associated with conventional lithium-ion batteries. These constraints include a reduced electrochemical stability window, high toxicity, flammability, and the formation of lithium dendrites. In this way, all-solid-state batteries present themselves as ideal candidates for improving energy density, environmental friendliness, and safety. In particular, all-solid-state configurations allow the introduction of compact, lightweight, high-energy-density batteries, suitable for low-power applications, known as thin-film batteries. Moreover, solid electrolytes typically offer wide electrochemical stability windows, enabling the integration of high-voltage cathodes and permitting the fabrication of higher-energy-density batteries. A high-voltage, all-solid-state lithium-ion thin-film battery composed of LiNi0.5Mn1.5O4 cathode, a LiPON solid electrolyte, and a lithium metal anode has been deposited layer by layer on low-cost stainless-steel current collector substrates. The structural and electrochemical properties of each electroactive component of the battery had been analyzed separately prior to the full cell implementation. In addition to a study of the internal solid-solid interface, comparing them was done with two similar cells assembled using conventional lithium foil, one with thin-film solid electrolyte and another one with thin-film solid electrolyte plus a droplet of LP30 liquid electrolyte. The thin-film all-solid state cell developed in this work delivered 80.5 mAh g-1 in the first cycle at C/20 and after a C-rate test of 25 cycles at C/10, C/5, C/2, and 1C and stabilized its capacity at around 70 mAh g-1 for another 12 cycles prior to the start of its degradation. This cell reached gravimetric and volumetric energy densities of 333 Wh kg-1 and 1,212 Wh l-1, respectively. Overall, this cell showed a better performance than its counterparts assembled with Li foil, highlighting the importance of the battery interface control.

Dataset Information

Operando analysis of electronic band structure in an all-solid-state thin-film battery.

Publications

Operando analysis of electronic band structure in an all-solid-state thin-film battery.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets