Dataset Information

Novel Concept, Design and Feasibility Test of Hybrid Temporal Bone and Sheep Head Holder.

ABSTRACT: We present a first feasibility and usability assessment of a novel commercial hybrid temporal and sheep head holder. Feasibility tests were conducted on human cadaveric and sheep temporal bone based on common otologic procedures. Overall practicality of using this device for cadaveric temporal bone dissections was evaluated. Beneficial aspects included ease of usage, handling, fixing and stability, inbuilt irrigation system, compartments for instrument placement, ergonomics and overall satisfaction. The novel hybrid Temporal and sheep bone holder bears the potential to provide benefits for cadaveric and sheep bone dissections.

Supplementary information

The online version contains supplementary material available at 10.1007/s12070-021-02612-x.

SUBMITTER: Parab SR

PROVIDER: S-EPMC9895667 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Novel Concept, Design and Feasibility Test of Hybrid Temporal Bone and Sheep Head Holder.

Parab Sapna Ramkrishna SR Khan Mubarak Muhamed MM Rana Amit Kumar AK

Indian journal of otolaryngology and head and neck surgery : official publication of the Association of Otolaryngologists of India 20210511 Suppl 3

We present a first feasibility and usability assessment of a novel commercial hybrid temporal and sheep head holder. Feasibility tests were conducted on human cadaveric and sheep temporal bone based on common otologic procedures. Overall practicality of using this device for cadaveric temporal bone dissections was evaluated. Beneficial aspects included ease of usage, handling, fixing and stability, inbuilt irrigation system, compartments for instrument placement, ergonomics and overall satisfact ...[more]

PMID: 36742638

Similar Datasets

Project description:UnlabelledThe well established techniques in tympanoplasty are routinely performed with operating microscopes for many decades now. Endoscopic ear surgeries provide minimally invasive approach to the middle ear and evolving new science in the field of otology. The disadvantage of endoscopic ear surgeries is that it is one-handed surgical technique as the non-dominant left hand of the surgeon is utilized for holding and manipulating the endoscope. This necessitated the need for development of the endoscope holder which would allow both hands of surgeon to be free for surgical manipulation and also allow alternate use of microscope during tympanoplasty. To report the preliminary utility of our designed and developed endoscope holder attachment gripping to microscope for two handed technique of endoscopic tympanoplasty. Prospective Non Randomized Clinical Study. Our endoscope holder attachment for microscope was designed and developed to aid in endoscopic ear surgery and to overcome the disadvantage of single handed endoscopic surgery. It was tested for endoscopic Tympanoplasty. The design of the endoscope holder attachment is described in detail along with its manipulation and manoeuvreing. A total of 78 endoholder assisted type 1 endoscopic cartilage tympanoplasties were operated to evaluate its feasibility for the two handed technique and to evaluate the results of endoscopic type 1 cartilage tympanoplasty. In early follow up period ranging from 6 to 20 months, the graft uptake was seen in 76 ears with one residual perforation and 1 recurrent perforations giving a success rate of 97.435 %. Our endocsope holder attachment for gripping microscope is a good option for two handed technique in endoscopic type 1 cartilage tympanoplasty. The study reports the successful application and use of our endoscope holder attachment for gripping microscope in two handed technique of endoscopic type 1 cartilage tympanoplasty and comparable results with microscopic techniques.Level of evidenceIV.

Project description:Deep semen deposition, avoiding retrograde flow, lesions and stress, has proved to be very important in the success of sheep AI. The objective of the present study was to develop a new, suitable anti-retrograde flow device for sheep cervical AI (DARIO) that enables deep deposition of semen into the cervix without any modifications to the procedures currently used, and to compare the fertility, fecundity, and prolificacy rates between DARIO and a traditional catheter. Field tests were performed on 16 farms actively participating in the non-profit National Association of Rasa Aragonesa Breeders´ genetic selection scheme and where sheep management was similar. A total of 242 AI lots were considered, including 1,299 ewes; 126 lots (662 ewes) were inseminated using DARIO, and 116 lots (637 ewes) using a traditional commercially-available catheter (control group). Several factors affecting AI results were included in the model for mean comparison between DARIO and control groups (farm and ram as random factors; catheter, year and photoperiod as fixed effects; catheter × photoperiod interaction). The type of catheter had a significant effect on fertility ( < 0.01) and fecundity rates ( < 0.01) but no significant effect was detected on the prolificacy rate ( = 0.45). For fertility rate (percentage of ewes lambing after AI), means ± SE for DARIO and control groups were 59.44 ± 2.13% and 49.60 ± 2.48%, respectively; for fecundity rates, means ± SE for DARIO and control groups were 0.99 ± 0.04 and 0.82 ± 0.05 lambs/inseminated ewe, respectively, and, for prolificacy rates, means ± SE for DARIO and control groups were 1.68 ± 0.04 and 1.63 ± 0.04 lambs/ewe lambing, respectively. Fertility rate was greater in the decreasing photoperiod ( = 0.01). Significant effects were found for both year ( < 0.05) and farm ( < 0.01) on fertility, fecundity, and prolificacy rates. Neither ram nor catheter × photoperiod showed any significant effects on the variables investigated ( > 0.05). Overall, the use of DARIO instead of the traditional commercially-available catheter increased both fertility and fecundity rates; the marginal mean differences were 9.05 pregnant ewes per 100 inseminated and 0.15 lambs per inseminated ewe, respectively.

Project description:PurposeThe purpose of this paper was to design, manufacture, and evaluate a tissue equivalent, dual magnetic resonance/computed tomography (MR/CT) visible anthropomorphic head and neck (H&N) phantom. This phantom was specially designed as an end-to-end quality assurance (QA) tool for MR imaging guided radiotherapy (MRIgRT) systems participating in NCI-sponsored clinical trials.MethodThe MRIgRT H&N phantom was constructed using a water-fillable acrylic shell and a custom insert that mimics an organ at risk (OAR) and target structures. The insert consists of a primary and secondary planning target volume (PTV) manufactured of a synthetic Clear Ballistic gel, an acrylic OAR and surrounding tissue fabricated using melted Superflab. Radiochromic EBT3 film and thermoluminescent detectors (TLDs) were used to measure the dose distribution and absolute dose, respectively. The phantom was evaluated by conducting an end-to-end test that included: imaging on a GE Lightspeed CT simulator, planning on Monaco treatment planning software (TPS), verifying treatment setup with MR, and irradiating on Elekta's 1.5 T Unity MR linac system. The phantom was irradiated three times using the same plan to determine reproducibility. Three institutions, equipped with either ViewRay MRIdian 60 Co or ViewRay MRIdian Linac, were used to conduct a feasibility study by performing independent end-to-end studies. Thermoluminescent detectors were evaluated in both reproducibility and feasibility studies by comparing ratios of measured TLD to reported TPS calculated values. Radiochromic film was used to compare measured planar dose distributions to expected TPS distributions. Film was evaluated by using an in-house gamma analysis software to measure the discrepancies between film and TPS.ResultsThe MRIgRT H&N phantom on the Unity system resulted in reproducible TLD doses (SD < 1.5%). The measured TLD to calculated dose ratios for the Unity system ranged from 0.94 to 0.98. The Viewray dose result comparisons had a larger range (0.95-1.03) but these depended on the TPS dose calculations from each site. Using a 7%/4 mm gamma analysis, Viewray institutions had average axial and sagittal passing rates of 97.3% and 96.2% and the Unity system had average passing rates of 97.8% and 89.7%, respectively. All of the results were within the Imaging and Radiation Oncology Core in Houston (IROC-Houston) standard credentialing criteria of 7% on TLDs, and >85% of pixels passing gamma analysis using 7%/4 mm on films.ConclusionsAn MRIgRT H&N phantom that is tissue equivalent and visible on both CT and MR was developed. The results from initial reproducibility and feasibility testing of the MRIgRT H&N phantom using the tested MGIgRT systems suggests the phantom's potential utility as a credentialing tool for NCI-clinical trials.

Project description:Scaffolds for bone regeneration have been engineered by a plethora of manufacturing technologies and biomaterials. However, the performance of these systems is often limited by lack of robustness in the process design, that hampers their scalability to clinical application. In the present study, Design of Experiment (DoE) was used as statistical tool to design the biofabrication of hybrid hydroxyapatite (HA)/collagen scaffolds for bone regeneration and optimize their integration in a multilayer osteochondral device. The scaffolds were synthesized via a multi-step bioinspired process consisting in HA nano-crystals nucleation on the collagen self-assembling fibers and ribose glycation was used as collagen cross-linking method to modulate the mechanical and physical properties. The process design was performed by selecting hydrogel concentration, HA/collagen ratio and cross-linker content as key variables and the fabrication was carried out basing on a full factorial design. Scaffold performances were tested by evaluating porosity, swelling ratio, degradation rate and mechanical behavior as model output responses while physicochemical properties of the constructs were evaluated by TGA, ICP, FT-IR spectroscopy, and XRD analysis. Physicochemical characterizations confirmed the nucleation of a biomimetic inorganic phase and the interaction of the HA and collagenic components. The DoE model revealed a significant interaction between HA content and collagen cross-linking in determining porosity, swelling and mechanical properties of the scaffolds. The combined effect of hydrogel concentration and mineral phase played a key role on porosity and swelling while degradation resulted to be mainly affected by the HA loading and ribose content. The model was then used to determine the suitable input parameters for the synthesis of multi-layer scaffolds with graded mineralization rate, that can be used to mimic the whole cartilage-bone interface. This work proved that experimental design applied to complex biofabrication processes represents an effective and reliable way to design hybrid constructs with standardized and tunable properties for osteochondral tissue engineering.

Project description:BackgroundIncorporating physical movement in the teaching of academic content (active learning) is a promising approach to improve children's health and academic performance. Despite documented benefits, implementation of active learning remains challenging for schools. The aims of this study are to develop an implementation strategy to support the delivery of active learning in elementary schools and examine the impact of the developed implementation strategy on the implementation and effectiveness of active learning.MethodsAim 1 will use Implementation Mapping, which is a multi-step approach that guides the use of theory, stakeholder input, and existing literature to develop a scientifically based implementation strategy for active learning in elementary schools. Aim 2 will feature a feasibility study to examine the impact of the implementation strategy on both implementation and effectiveness outcomes, consistent with a Hybrid Type 2 design. Acceptability and implementation fidelity will be the primary implementation outcomes, and student physical activity levels will be the primary effectiveness outcome. We will recruit two elementary schools within our partner district, and one will be randomly assigned to receive usual support while the other will receive the newly developed implementation strategy. Participants from each school will complete baseline, 6-, and 12-month assessments. Bayesian statistical approaches will quantitatively examine preliminary effectiveness outcomes. We will also use an embedded mixed methods approach to triangulate findings.DiscussionThis study's innovative overarching conceptual framework (centered on Implementation Mapping) will inform the development and testing of the implementation strategy. This study also uses methodological approaches optimal for feasibility studies, including mixed methods and Bayesian statistics. As a result, we will be able to gain a thorough understanding about the feasibility and preliminary effectiveness of the implementation strategy, which will inform subsequent research and practice for implementing active learning in schools.Trial registrationClinicalTrials.gov, NCT05048433 , registered on September 8, 2021.

Dataset Information

Novel Concept, Design and Feasibility Test of Hybrid Temporal Bone and Sheep Head Holder.

Supplementary information

Publications

Novel Concept, Design and Feasibility Test of Hybrid Temporal Bone and Sheep Head Holder.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets