Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Amazing epsilon-shaped trend for fretting fatigue characteristics in AM60 magnesium alloy under stress-controlled cyclic conditions at bending loads with zero mean stress

ABSTRACT: In the present article, fatigue properties (pure and fretting) of magnesium alloys (AM60) under cyclic bending loading were compared. For this objective, a rotary fatigue testing device was utilized with a fretting module on standard cylindrical samples under bending loads with zero means stress. The fretting fatigue condition decreased fatigue lifetime compared with pure fatigue but in an amazing Epsilon-shaped trend. Comparatively speaking to the state of pure fatigue, the fatigue lifetime of the fretting fatigue condition reduced by 91.0% and 44.8%, respectively, between the lowest level of stress (80 MPa) and the greatest level of stress (120 MPa). To study the fracture behavior and the fractography analysis, field-emission scanning electron microscopy (FESEM) was utilized. In general, since both quasi-cleavage and cleavage were seen; therefore, the fracture behavior for all samples was brittle. In both test conditions (fretting fatigue and pure fatigue), at higher stress levels, the average crack length was higher than at low-stress levels. In addition, the number of cracks (in high- and low-stress levels) was observed to be less in fretting fatigue conditions than in pure fatigue conditions, but the average crack length in fretting fatigue conditions in high-stress levels and low-stress levels was 212.82% and 259.47% higher than the average crack length under the pure fatigue condition, respectively.

SUBMITTER: Rezanezhad S

PROVIDER: S-EPMC9904491 | biostudies-literature | 2023 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fretting and Fretting Corrosion Processes of Ti6Al4V Implant Alloy in Simulated Oral Cavity Environment.

Project description:The paper presents the results of in vitro studies of fretting and fretting corrosion processes of Ti6Al4V implant alloy in the environment of natural saliva and self-made mucin-based artificial saliva solutions. The study was performed on a specially designed fretting pin-on-disc tester, which was combined with a set used for electrochemical research. The open circuit potential measurements and potentiodynamic method were used for corrosion tests. The worn surfaces were subjected to microscopic observations and an evaluation of wear. Results were interpreted using the dissipated energy and third-body approaches. The X-ray diffraction analysis showed that titanium oxides constitute over 80% of the friction products. Special attention was paid to the role of saliva and its substitutes, which in certain cases can lead to the intensification of fretting wear. On the basis of the received results, a new phenomenological model of fretting corrosion processes was proposed. This model involves the formation of an abrasive paste that is a combination of metal oxides and the organic components of saliva.

| S-EPMC7177599 | biostudies-literature

Thermo-optic epsilon-near-zero effects.

Project description:Nonlinear epsilon-near-zero (ENZ) nanodevices featuring vanishing permittivity and CMOS-compatibility are attractive solutions for large-scale-integrated systems-on-chips. Such confined systems with unavoidable heat generation impose critical challenges for semiconductor-based ENZ performances. While their optical properties are temperature-sensitive, there is no systematic analysis on such crucial dependence. Here, we experimentally report the linear and nonlinear thermo-optic ENZ effects in indium tin oxide. We characterize its temperature-dependent optical properties with ENZ frequencies covering the telecommunication O-band, C-band, and 2-μm-band. Depending on the ENZ frequency, it exhibits an unprecedented 70-93-THz-broadband 660-955% enhancement over the conventional thermo-optic effect. The ENZ-induced fast-varying large group velocity dispersion up to 0.03-0.18 fs2nm-1 and its temperature dependence are also observed for the first time. Remarkably, the thermo-optic nonlinearity demonstrates a 1113-2866% enhancement, on par with its reported ENZ-enhanced Kerr nonlinearity. Our work provides references for packaged ENZ-enabled photonic integrated circuit designs, as well as a new platform for nonlinear photonic applications and emulations.

| S-EPMC10817958 | biostudies-literature

Microscopic Response Mechanism of Epsilon-Negative and Epsilon-Near-Zero Metacomposites.

Project description:Metals have traditionally served as the primary functional phase in the development of metamaterials exhibiting epsilon-near-zero (ENZ) and epsilon-negative (EN) responses, albeit with persisting ambiguities regarding their response mechanisms. This paper presents the tunable ENZ (ε' ~ 0) and EN (ε' < 0) parameters at the 20-MHz to 1-GHz region based on Cu/CaCu3Ti4O12 (Cu/CCTO) metacomposites. By means of first-principles calculations and multi-physics simulations, the underlying mechanisms governing ENZ and EN responses are unveiled. The intricate pathways through which metacomposites achieve 2 dielectric response mechanisms are delineated: At low Cu content, a weak EN response (|ε'| < 200) was excited by electric dipole resonance, accompanied by ENZ effect; conversely, at high Cu content, due to the increase in effective electron concentration, plasmonic oscillation behavior occurs in the constructed 3-dimensional Cu network, resulting in strong EN response (|ε'| ~ 1,000) in the radio frequency band. These phenomena are explicated through 2 distinct Cu/CCTO models: Cu in an isolated state and a connected network state. This study not only comprehensively elucidates the 2 EN response mechanisms achieved by typical metacomposites with metals as functional phases but also delves into their associated electromagnetic shielding and thermal properties, providing a theoretical basis for their practical applications.

| S-EPMC11694408 | biostudies-literature

Performing calculus with epsilon-near-zero metamaterials.

Project description:Calculus is a fundamental subject in mathematics and extensively used in physics and astronomy. Performing calculus operations by analog computing has received much recent research interest because of its high speed and large data throughput; however, current analog calculus frameworks suffer from bulky sizes and relatively low integration densities. In this work, we introduce the concept of an epsilon-near-zero (ENZ) metamaterial processing unit (MPU) that performs differentiation and integration on analog signals to achieve extreme miniaturization at the subwavelength scale by generating desired dispersions of the ENZ metamaterials with photonic doping. To show the feasibility of this proposal, we further build an experimental analog image edge extraction system with a differentiating ENZ-MPU as its compute core. With a computing density theoretically analyzed to be several tera-operations per second and square micrometer, the proposed ENZ-MPU is scalable and configurable for more complex computations, providing an effective solution for analog calculus operators with extreme computing density and data throughput.

| S-EPMC9328691 | biostudies-literature

Fretting properties of biodegradable Mg-Nd-Zn-Zr alloy in air and in Hank's solution.

Project description:Fretting is a significant cause for the failure of orthopedic implants. Currently, since magnesium and its alloys have been developed as promising biodegradable implant materials, the fretting behavior of the Mg alloys is of great research significance. In this study, a Mg-Nd-Zn-Zr alloy (hereafter, denoted as JDBM alloy) was selected as experimental material, and its fretting behaviors were evaluated under 5 N, 10 N and 20 N normal loads with a displacement of 200 μm under the frequency of 10 Hz at 37 °C in air and in Hank's solution, respectively. The results indicated that while the friction coefficient decreased with the increment of the normal load, the wear volume of the alloy increased with the increment of the normal load both in air and in Hank's solution. Both the friction coefficients and the wear volume of the fretting in Hank's solution were much lower than those in air environment. The evolution trend of friction coefficients with time had different performance in air environment and the Hank's solution group. Although oxidation occurred during the fretting tests in Hank's solution, the damage of JDBM alloy was still reduced due to the lubrication effects of Hank's solution. Moreover, the addition of Fetal bovine serum (FBS) could act as lubrication and result in the reduction of the fretting damage.

| S-EPMC5095712 | biostudies-literature

Non-Hermitian doping of epsilon-near-zero media.

Project description:In solid-state physics, "doping" is a pivotal concept that allows controlling and engineering of the macroscopic electronic and optical properties of materials such as semiconductors by judiciously introducing small concentrations of impurities. Recently, this concept has been translated to two-dimensional photonic scenarios in connection with host media characterized by vanishingly small relative permittivity ("epsilon near zero"), showing that it is possible to obtain broadly tunable effective magnetic responses by introducing a single, nonmagnetic doping particle at an arbitrary position. So far, this phenomenon has been studied mostly for lossless configurations. In principle, the inevitable presence of material losses can be compensated via optical gain. However, taking inspiration from quantum (e.g., parity-time) symmetries that are eliciting growing attention in the emerging fields of non-Hermitian optics and photonics, this suggests considering more general gain-loss interactions. Here, we theoretically show that the photonic doping concept can be extended to non-Hermitian scenarios characterized by tailored distributions of gain and loss in either the doping particles or the host medium. In these scenarios, the effective permeability can be modeled as a complex-valued quantity (with the imaginary part accounting for the gain or loss), which can be tailored over broad regions of the complex plane. This enables a variety of unconventional optical responses and waveguiding mechanisms, which can be, in principle, reconfigured by varying the optical gain (e.g., via optical pumping). We envision several possible applications of this concept, including reconfigurable nanophotonics platforms and optical sensing, which motivate further studies for their experimental validation.

| S-EPMC7322020 | biostudies-literature

Intracavity Epsilon-Near-Zero Dual-Range Frequency Switch

Project description: Not available

| S-EPMC11926959 | biostudies-literature

Electrically Tunable Epsilon-Near-Zero (ENZ) Metafilm Absorbers.

Project description:Enhancing and spectrally controlling light absorption is of great practical and fundamental importance. In optoelectronic devices consisting of layered semiconductors and metals, absorption has traditionally been manipulated with the help of Fabry-Pérot resonances. Even further control over the spectral light absorption properties of thin films has been achieved by patterning them into dense arrays of subwavelength resonant structures to form metafilms. As the next logical step, we demonstrate electrical control over light absorption in metafilms constructed from dense arrays of actively tunable plasmonic cavities. This control is achieved by embedding indium tin oxide (ITO) into these cavities. ITO affords significant tuning of its optical properties by means of electrically-induced carrier depletion and accumulation. We demonstrate that particularly large changes in the reflectance from such metafilms (up to 15% P) can be achieved by operating the ITO in the epsilon-near-zero (ENZ) frequency regime where its electrical permittivity changes sign from negative to positive values.

| S-EPMC4637893 | biostudies-literature

35 Hz shape memory alloy actuator with bending-twisting mode.

Project description:Shape Memory Alloy (SMA) materials are widely used as an actuating source for bending actuators due to their high power density. However, due to the slow actuation speed of SMAs, there are limitations in their range of possible applications. This paper proposes a smart soft composite (SSC) actuator capable of fast bending actuation with large deformations. To increase the actuation speed of SMA actuator, multiple thin SMA wires are used to increase the heat dissipation for faster cooling. The actuation characteristics of the actuator at different frequencies are measured with different actuator lengths and results show that resonance can be used to realize large deformations up to 35 Hz. The actuation characteristics of the actuator can be modified by changing the design of the layered reinforcement structure embedded in the actuator, thus the natural frequency and length of an actuator can be optimized for a specific actuation speed. A model is used to compare with the experimental results of actuators with different layered reinforcement structure designs. Also, a bend-twist coupled motion using an anisotropic layered reinforcement structure at a speed of 10 Hz is also realized. By increasing their range of actuation characteristics, the proposed actuator extends the range of application of SMA bending actuators.

| S-EPMC4759690 | biostudies-literature

Marginal mean models for zero-inflated count data.

Project description:Zero-inflated regression models have emerged as a popular tool within the parametric framework to characterize count data with excess zeros. Despite their increasing popularity, much of the literature on real applications of these models has centered around the latent class formulation where the mean response of the so-called at-risk or susceptible population and the susceptibility probability are both related to covariates. While this formulation in some instances provides an interesting representation of the data, it often fails to produce easily interpretable covariate effects on the overall mean response. In this article, we propose two approaches that circumvent this limitation. The first approach consists of estimating the effect of covariates on the overall mean from the assumed latent class models, while the second approach formulates a model that directly relates the overall mean to covariates. Our results are illustrated by extensive numerical simulations and an application to an oral health study on low income African-American children, where the overall mean model is used to evaluate the effect of sugar consumption on caries indices.

| S-EPMC4988952 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data