Dataset Information

A precise TIN clipping algorithm for the digital mining design of the opencast coal mine.

ABSTRACT: The triangulated irregular network (TIN) clipping algorithm is one of the vital algorithms for the digital mining design of opencast coal mines based on the geological digital elevation model (DEM) described by TIN. This paper gives a precise TIN clipping algorithm applied in the digital mining design of the opencast coal mine. To improve the algorithm's efficiency, a spatial grid index is built and utilized to embed the Clipping Polygon (CP) into the Clipped TIN (CTIN) by interpolating the CP's vertices' elevation and solving the intersections of the CP and the CTIN. After that, the topology of the triangles situated within (outside of) the CP is reconstructed, and then the boundary polygon of those triangles is obtained based on the reconstructed topology. Finally, a new boundary TIN between the CP and the boundary polygon of the triangles situated within (outside of) the CP is generated by applying the one-time edge-prior constrained Delaunay triangulation (CDT) growth algorithm, and the TIN to be clipped out is separated from the CTIN by topology modification. At that point, CTIN clipping is accomplished with the local details remaining. The algorithm has been programmed in C# and.NET. Additionally, it is also applied to the opencast coal mine digital mining design practice, and it is robust and highly efficient.

SUBMITTER: Zhao J

PROVIDER: S-EPMC9934458 | biostudies-literature | 2023

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A precise TIN clipping algorithm for the digital mining design of the opencast coal mine.

Zhao Jingchang J Wang Xiangbo X Wang Dong D Liu Guangwei G

PloS one 20230216 2

The triangulated irregular network (TIN) clipping algorithm is one of the vital algorithms for the digital mining design of opencast coal mines based on the geological digital elevation model (DEM) described by TIN. This paper gives a precise TIN clipping algorithm applied in the digital mining design of the opencast coal mine. To improve the algorithm's efficiency, a spatial grid index is built and utilized to embed the Clipping Polygon (CP) into the Clipped TIN (CTIN) by interpolating the CP's ...[more]

PMID: 36795793

Similar Datasets

Project description:Heavy metals contaminations in mining areas aroused wide concerns globally. Efficient evaluation of its pollution status is a basis for further soil reclamation. Visible and near-infrared reflectance (Vis-NIR) spectroscopy has been diffusely used for retrieving heavy metals concentrations. However, the reliability and feasibility of calibrated models were still doubtful. The present study estimated zinc (Zn) concentrations via the random forest (RF) and partial least squares regression (PLSR) using ground in-situ Zn concentrations as well as soil spectral reflectance at an Opencast Coal Mine of Ordos, China in February 2020. The coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE), and the ratio of performance to deviation (RPD) were selected to assess the robustness of the methods in estimating Zn contents. Moreover, the characteristic bands were chosen by Pearson correlation analysis and Boruta Algorithm. Finally, the comparison between RF and PLSR combined with eight spectral reflectance transformation methods was conducted for four concentration groups to determine the optimal model. The results indicated that: (1) Zn contents represented a skewed distribution (coefficient of variation (CV) = 33%); (2) the spectral reflectance tended to decrease with the increase of Zn contents during 580-1850 nm based on Savitzky-Golay smoothing (SG); (3) the continuous wavelet transform (CWT) demonstrated higher effectiveness than other spectral reflectance transformation methods in enhancing spectral responses, the R2 between Zn contents and the soil spectral reflectance achieved the highest (R2 = 0.71) by using CWT; (4) the RF combined with CWT exhibited the best performance than other methods in the current study (R2 = 0.97, RPD = 3.39, RMSE = 1.05 mg kg-1, MAE = 0.79 mg kg-1). The current study supplied a scientific scheme and theoretical support for predicting heavy metals concentrations via the Vis-NIR spectral method in possible contaminated areas such as coal mines and metallic mineral deposit areas.

Project description:Air pollution in opencast coal mine areas is a critical issue, resulting in harmful severe effects on human health. Therefore, it is essential to understand the air pollution factors and to assess the risks to humans. This study evaluated the potential risks (carcinogen and non-carcinogen) of inhalation exposure to PM10-bound heavy metals and Polycyclic Aromatic Hydrocarbons (PAHs) in an open pit mine in northern Colombia. During February-May 2022, PM10 samples were collected at eight sites. Heavy metals (i.e., Al, Cr(VI), Mn, Cu, Zn, As, Pb) and PAHs (thirteen priority PAHs, and one non-priority PAH) levels linked to PM10 were analyzed by X-ray fluorescence and gas chromatography-mass spectrometry, respectively. PM10 concentrations were found to range between 4.70 and 59.90 µg m-3. Out of the three different zones of the study area (i.e., North Zone, South Zone, and Populated Zone), the North Zone recorded the highest daily average concentrations of Cr(VI) (104.16 ng m-3), Mn (28.39 ng m-3), Cu (33.75 ng m-3), Zn (57.99 ng m-3), As (44.92 ng m-3), and Pb (27.13 ng m-3). The fraction of the analyzed heavy metals at all monitoring sites was 82%-89% for Al, followed by Cr(VI) with 3%-6%. Cr(VI) was the major contributor to the carcinogenic risk values, while Cu, Cr(VI), and As were the main drivers for the non-carcinogenic risk. The average cancer risk range for heavy metals was 3.30 × 10-04 -5.47 × 10-04. On the other hand, the cancer risk for PAHs exposure was acceptable. The average incremental lifetime cancer risk (ILCR) values varied between 2.87 × 10-07 and 4.21 × 10-07. Benzo[a]pyrene contributed to 54%-56% of the total risk from inhalation of PM10-bound PAHs, while Indeno[1,2,3-cd]pyrene contributed to 16%-19%. Based on the Monte Carlo sensitivity analysis, exposure to Cr(VI) was the main factor affecting cancer risk in the North, South, and Populated Zones. A suitable risk assessment and management plan requires understanding PM10-bound heavy metals and PAHs concentration levels as well as their potential health risks, mainly in open-cast coal mine zones. Our study found that people living near open-pit mines face potential health risks, so it is crucial to establish policies and regulations to control emission sources.

Project description:BackgroundThe Xilingol grassland ecosystem has abundant superficial coal reserves. Opencast coal mining and burning of coal for electricity have caused a series of environmental challenges. Biogenic generation of methane from coal possesses the potential to improve economic and environmental outcomes of clean coal utilization. However, whether the microbes inhabiting the grassland soil have the functional potential to convert coal into biomethane is still unclear.ResultsMicrobial communities in an opencast coal mine and in grassland soil covering and surrounding this mine and their biomethane production potential were investigated by Hiseq sequencing and anaerobic cultivation. The microbial communities in covering soil showed high similarity to those in the surrounding soil, according to the pairwise weighted UniFrac distances matrix. The majority of bacterial communities in coal and soil samples belonged to the phyla Firmicutes, Bacteroidetes, Actinobacteria and Proteobacteria. The dominant bacterial genera in grassland soil included Gaiella, Solirubrobacter, Sphingomonas and Streptomyces; whereas, the most abundant genus in coal was Pseudarthrobacter. In soil, hydrogenotrophic Methanobacterium was the dominant methanogen, and this methanogen, along with acetoclastic Methanosarcina and methylotrophic Methanomassiliicoccus, was detected in coal. Network-like Venn diagram showed that an average of 28.7% of microbial communities in the samples belonged to shared genera, indicating that there is considerable microbial overlap between coal and soil samples. Potential degraders and methanogens in the soil efficiently stimulated methane formation from coal samples by the culturing-based approach. The maximum biogenic methane yields from coal degradation by the microbial community cultured from grassland soil reached 22.4 μmol after 28 day.ConclusionThe potential microbial coal degraders and methanogenic archaea in grassland soil were highly diverse. Significant amounts of biomethane were generated from coal by the addition of grassland soil microbial communities. The unique species present in grassland soil may contribute to efficient methanogenic coal bioconversion. This discovery not only contributes to a better understanding of global microbial biodiversity in coal mine environments, but also makes a contribution to our knowledge of the synthetic microbiology with regard to effective methanogenic microbial consortia for coal degradation.

Dataset Information

A precise TIN clipping algorithm for the digital mining design of the opencast coal mine.

Publications

A precise TIN clipping algorithm for the digital mining design of the opencast coal mine.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets