Tin Oxide/Vertically Aligned Graphene Hybrid Electrodes Prepared by Sonication-Assisted Sequential Chemical Bath Deposition for High-Performance Supercapacitors
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC9948212 | biostudies-literature | 2023 Feb
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Tunable plasmonic structure at the nanometer scale presents enormous opportunities for various photonic devices. In this work, we present a hybrid plasmonic thin film platform: i.e., a vertically aligned Au nanopillar array grown inside a TiN matrix with controllable Au pillar density. Compared to single phase plasmonic materials, the presented tunable hybrid nanostructures attain optical flexibility including gradual tuning and anisotropic behavior of the complex dielectric function, resonant peak shifting and change of surface plasmon resonances (SPRs) in the UV-visible range, all confirmed by numerical simulations. The tailorable hybrid platform also demonstrates enhanced surface plasmon Raman response for Fourier-transform infrared spectroscopy (FTIR) and photoluminescence (PL) measurements, and presents great potentials as designable hybrid platforms for tunable optical-based chemical sensing applications.
| S-EPMC9473282 | biostudies-literature
Project description:Molybdenum disulfide (MoS2) got tremendous attention due to its atomically thin body, rich physics, and high carrier mobility. The controlled synthesis of large area and high crystalline monolayer MoS2 nanosheets on diverse substrates remains a challenge for potential practical applications. Synthesizing different structured MoS2 nanosheets with horizontal and vertical orientations with respect to the substrate surface would bring a configurational versatility with benefit for numerous applications, including nanoelectronics, optoelectronics, and energy technologies. Among the proposed methods, ambient pressure chemical vapor deposition (AP-CVD) is a promising way for developing large-scale MoS2 nanosheets because of its high flexibility and facile approach. Here, we show an effective way for synthesizing large-scale horizontally and vertically aligned MoS2 on different substrates such as flat SiO2/Si, pre-patterned SiO2 and conductive substrates (TaN) benefit various direct TMDs production. In particular, we show precise control of CVD optimization for yielding high-quality MoS2 layers by changing growth zone configuration and the process steps. We demonstrated that the influence of configuration variability by local changes of the S to MoO3 precursor positions in the growth zones inside the CVD reactor is a key factor that results in differently oriented MoS2 formation. Finally, we show the layer quality and physical properties of as-grown MoS2 by means of different characterizations: Raman spectroscopy, scanning electron microscopy (SEM), photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS). These experimental findings provide a strong pathway for conformally recasting AP-CVD grown MoS2 in many different configurations (i.e., substrate variability) or motifs (i.e., vertical or planar alignment) with potential for flexible electronics, optoelectronics, memories to energy storage devices.
| S-EPMC8949030 | biostudies-literature
Project description:Supercapacitors, which store electrical energy through reversible ion on the surface of conductive electrodes have gained enormous attention for variously portable energy storage devices. Since the capacitive performance is mainly determined by the structural and electrochemical properties of electrodes, the electrodes become more crucial to higher performance. However, due to the disordered microstructure and low electrochemical activity of electrode for ion tortuous migration and accumulation, the supercapacitors present relatively low capacitance and energy density. Here we report a high-performance supercapacitor based on polyaniline/vertical-aligned carbon nanotubes (PANI/VA-CNTs) nanocomposite electrodes where the vertical-aligned-structure is formed by the electrochemical-induction (0.75 V). The supercapacitor displays large specific capacitance of 403.3 F g-1, which is 6 times higher than disordered CNTs in HClO4 electrolyte. Additionally, the supercapacitor can also present high specific capacitance (314.6 F g-1), excellent cycling stability (90.2% retention after 3000 cycles at 4 A g-1) and high energy density (98.1 Wh kg-1) in EMIBF4 organic electrolyte. The key to high-performance lies in the vertical-aligned-structure providing direct path channel for ion faster diffusion and high electrochemical capacitance of polyaniline for ion more accommodation.
| S-EPMC5341108 | biostudies-literature
Project description:MXenes, such as Ti3C2Tx, are promising materials for electrodes of supercapacitors (SCs). Colloidal techniques have potential for the fabrication of advanced Ti3C2Tx composites with high areal capacitance (CS). This paper reports the fabrication of Ti3C2TX-Fe3O4-multiwalled carbon nanotube (CNT) electrodes, which show CS of 5.52 F cm-2 in the negative potential range in 0.5 M Na2SO4 electrolyte. Good capacitive performance is achieved at a mass loading of 35 mg cm-2 due to the use of Celestine blue (CB) as a co-dispersant for individual materials. The mechanisms of CB adsorption on Ti3C2TX, Fe3O4, and CNTs and their electrostatic co-dispersion are discussed. The comparison of the capacitive behavior of Ti3C2TX-Fe3O4-CNT electrodes with Ti3C2TX-CNT and Fe3O4-CNT electrodes for the same active mass, electrode thickness and CNT content reveals a synergistic effect of the individual capacitive materials, which is observed due to the use of CB. The high CS of Ti3C2TX-Fe3O4-CNT composites makes them promising materials for application in negative electrodes of asymmetric SC devices.
| S-EPMC8199491 | biostudies-literature
Project description:A novel binder-free graphene - carbon nanotubes - SnO2 (GCNT-SnO2) aerogel with vertically aligned pores was prepared via a simple and efficient directional freezing method. SnO2 octahedrons exposed of {221} high energy facets were uniformly distributed and tightly anchored on multidimensional graphene/carbon nanotube (GCNT) composites. Vertically aligned pores can effectively prevent the emersion of "closed" pores which cannot load the active SnO2 nanoparticles, further ensure quick immersion of electrolyte throughout the aerogel, and can largely shorten the transport distance between lithium ions and active sites of SnO2. Especially, excellent electrical conductivity of GCNT-SnO2 aerogel was achieved as a result of good interconnected networks of graphene and CNTs. Furthermore, meso- and macroporous structures with large surface area created by the vertically aligned pores can provide great benefit to the favorable transport kinetics for both lithium ion and electrons and afford sufficient space for volume expansion of SnO2. Due to the well-designed architecture of GCNT-SnO2 aerogel, a high specific capacity of 1190 mAh/g with good long-term cycling stability up to 1000 times was achieved. This work provides a promising strategy for preparing free-standing and binder-free active electrode materials with high performance for lithium ion batteries and other energy storage devices.
| S-EPMC4980600 | biostudies-literature
Project description:Metal nanoparticle exsolution from metal oxide hosts has recently garnered great attention to improve the performance of energy conversion and storage devices. In this study, the nickel exsolution mechanisms in a vertically aligned nanostructure (VAN) thin film of heteroepitaxial (Sr0.9Pr0.1)0.9Ti0.9Ni0.1O3-δ-Ce0.9Gd0.1O1.95 with a columnar architecture was investigated for the first time. Experimental results and Density Functional Theory (DFT) calculations reveal that the multiple vertical interphases in a VAN with a hierarchical arrangement provide faster and more selective Ni diffusion pathways to the surface than traditional bulk diffusion in epitaxial films. Kinetic studies conducted at different temperatures and times indicate that the nucleation process of the exsolved metal nanoparticles primarily takes place at the surface through the phase boundaries of the columns. The vertical strain is crucial in preserving the film's microstructure, yielding a robust heteroepitaxial architecture after reduction. This innovative heteromaterial opens up new possibilities for designing efficient devices through advanced structural engineering to achieve controlled nanoparticle formation.
| S-EPMC11487182 | biostudies-literature
Project description:The increasing demand for flexible electronic devices has risen due to the high interest in electronic textiles (e-textiles). Consequently, the urge to power e-textiles has sparked enormous interest in flexible energy storage devices. One-dimensional (1D) configuration supercapacitors are the most promising technology for textile applications, but often their production involves complex synthesis techniques and expensive materials. This work unveils the use of the novel electrospray deposition (ESD) technique for the deposition of poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS). This deposition methodology on conductive carbon yarns creates flexible electrodes with a high surface area. The deposition conditions of PEDOT:PSS were optimized, and their influence on the electrochemical performance of a 1D symmetric supercapacitor with a cellulose-based gel as an electrolyte and a separator was evaluated. The tests herein reported show that these capacitors exhibited a high specific capacitance of 72 mF g-1, an excellent cyclability of more than 85% capacitance retention after 1500 cycles, and an outstanding capability of bending.
| S-EPMC10316332 | biostudies-literature
Project description:UnlabelledThe structure of vertically aligned carbon nanotubes (CNTs) severely depends on the properties of pre-prepared catalyst films. Aiming for the preparation of precisely controlled catalyst film, atomic layer deposition (ALD) was employed to deposit uniform Fe(2)O(3) film for the growth of CNT arrays on planar substrate surfaces as well as the curved ones. Iron acetylacetonate and ozone were introduced into the reactor alternately as precursors to realize the formation of catalyst films. By varying the deposition cycles, uniform and smooth Fe(2)O(3) catalyst films with different thicknesses were obtained on Si/SiO(2) substrate, which supported the growth of highly oriented few-walled CNT arrays. Utilizing the advantage of ALD process in coating non-planar surfaces, uniform catalyst films can also be successfully deposited onto quartz fibers. Aligned few-walled CNTs can be grafted on the quartz fibers, and they self-organized into a leaf-shaped structure due to the curved surface morphology. The growth of aligned CNTs on non-planar surfaces holds promise in constructing hierarchical CNT architectures in future.Electronic supplementary materialThe online version of this article (doi:10.1007/s11671-010-9676-0) contains supplementary material, which is available to authorized users.
| S-EPMC2956049 | biostudies-literature
Project description:Inverted colloidal-nanocrystal-based LEDs (NC-LEDs) are highly interesting and invaluable for large-scale display technology and flexible electronics. Semiconductor nanorods (NRs), in addition to the tunable wavelengths of the emitted light (achieved, for example, by the variation of the NR diameter or the diameter of core in a core-shell configuration), also exhibit linearly polarized emission, a larger Stokes shift, faster radiative decay, and slower bleaching kinetics than quantum dots (QDs). Despite these advantages, it is difficult to achieve void-free active NR layers using simple spin-coating techniques. Herein, we employ electrophoretic deposition (EPD) to make closely packed, vertically aligned CdSe/CdS core/shell nanorods (NRs) as the emissive layer. Following an inverted architecture, the device fabricated yields an external quantum efficiency (EQE) of 6.3% and a maximum luminance of 4320 cd/m2 at 11 V. This good performance can be attributed to the vertically aligned NR layer, enhancing the charge transport by reducing the resistance of carrier passage, which is supported by our finite element simulations. To the best of our knowledge, this is the first time vertically aligned NR layers made by EPD have been reported for the fabrication of NC-LEDs and the device performance is one of the best for inverted red NR-LEDs. The findings presented in this work bring forth a simple and effective technique for making vertically aligned NRs, and the mechanism behind the NR-LED device with enhanced performance using these NRs is illustrated. This technique may prove useful to the development of a vast class of nanocrystal-based optoelectronics, including solar cells and laser devices.
| S-EPMC10910441 | biostudies-literature
Project description:This study introduces a method of patterning carbon nanotube (CNTs) forests that is both fast and simple. We found that, as commercially available oil-based markers undergo nanotube synthesis, a thin film forms that prevents the catalyst, ferrocene, from coming into contact with the surface of the test sample. This, thus, blocks CNT growth. Through further deduction, we used styrene maleic anhydride (SMA) to conduct CNT patterning, in addition to analyzing the relationship between the weight percent concentration of the SMA and the extent to which it blocked CNT growth. We developed two separate methods for applying ink to soft and hard substrates: one method involved ink printing and the other laser stripping. In the CNT pattern we produced, a minimum line width of around 10 µm was attained.
| S-EPMC6781085 | biostudies-literature