Dataset Information

Subaxial Cervical Pedicular Screw Insertion via the Nonanatomic Axis: Identification of Entry Point and Trajectory Based on a Radiographic Study and Workshop.

ABSTRACT:

Study design

A radiological study and workshop.

Objective

To propose a novel technique for subaxial cervical pedicle screw (CPS) insertion via the nonanatomic axis (nAA) and identify a new entry point (EP) and trajectory based on a radiological study.

Methods

The new EP was determined to be the center of the upper half of the lateral mass, and the nAA was defined as the line connecting the EP and center of the pedicle. CT images of 493 subaxial cervical pedicles from 51 adults were utilized. The pedicle axis length (PAL/nPAL), pedicle transverse angle (PTA/nPTA), sagittal and transverse pedicle screw depth ratio (S-DO, T-DO), and sagittal and transverse angles (S-angle, T-angle) were measured in the anatomical axis (AA) and nAA. nAA-CPS insertions were conducted on dry specimens, and the positions of the screws were graded.

Results

The nPTA (22.35° ± 1.57°), nPAL (23.75 ± 2.07 mm), T-DO (45.61% ± 3.10%), and S-DO (70.46% ± 4.44%) of the nAA-CPS were significantly different from the PTA (41.86° ± 2.77°), PAL (31.98 ± 2.40 mm), T-DO and S-DO of the AA-CPS (both 100% in ideal conditions), respectively (P < .05). The T-angle and S-angle were 92.78° ± 3.07° and 92.18° ± 3.78°, respectively. A constant EP and consistent trajectory of the nAA-CPS identified by 2 perpendicular angles were summarized and utilized as the manipulation protocols of the workshop, and a perfect position was achieved in 80.00% (24/30) of screws.

Conclusion

The nAA-CPS is a novel alternative to the classic CPS technique. A constant entry point and 2 perpendicular angles in the sagittal and transverse planes for identifying the trajectory of the nAA-CPS should be taken into account in the establishment of a manipulation protocol.

SUBMITTER: Wang Y

PROVIDER: S-EPMC9972273 | biostudies-literature | 2023 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Subaxial Cervical Pedicular Screw Insertion via the Nonanatomic Axis: Identification of Entry Point and Trajectory Based on a Radiographic Study and Workshop.

Wang Yingbo Y Hu Bo B Wu Jian J Chen Wei W Wang Zhong Z Zhu Jun J Fan Weili W Liu Mingyong M Zhao Jianhua J Liu Peng P

Global spine journal 20210223 2

<h4>Study design</h4>A radiological study and workshop.<h4>Objective</h4>To propose a novel technique for subaxial cervical pedicle screw (CPS) insertion via the nonanatomic axis (nAA) and identify a new entry point (EP) and trajectory based on a radiological study.<h4>Methods</h4>The new EP was determined to be the center of the upper half of the lateral mass, and the nAA was defined as the line connecting the EP and center of the pedicle. CT images of 493 subaxial cervical pedicles from 51 adu ...[more]

PMID: 33618552

Similar Datasets

Project description:BackgroundPosterior cervical pedicle screw (CPS) internal fixation has better biomechanical stability than other posterior cervical fixation methods. However, this technique is limited in clinical practice due to the complex anatomical structure and the adjacent relationship of the cervical pedicle, and the high risk of neurovascular injury. The purpose of this study was to describe a novel subaxial CPS insertion technique assisted by a special angular scale using lateral mass as a reference marker and to evaluate the accuracy of CPS placement and the distribution characteristics of CPS misplacement.MethodsA total of 36 patients with subaxial cervical spine diseases who underwent posterior CPS fixation were consecutively selected. The optimal entry point on the posterior surface of the lateral mass was identified on the three-dimensional cervical model reconstructed from preoperative computed tomography (CT) images. The pedicle transverse angle (PTA) and pedicle-lateral mass angle (PLMA) were measured on the transverse and sagittal CT images respectively. The pedicle screws were inserted according to the preoperatively planned entry point and angles. We analysed the postoperative CT images for CPS misplacement rates and perforation directions following the Lee classification.ResultsOverall, 177 pedicle screws were inserted, of which 119 (67.2%) were classified as grade 0, 43 (24.3%) as grade 1, 12 (6.8%) as grade 2 and 3 (1.7%) as grade 3 by the postoperative CT images. The accuracy rate of CPS placement was 91.5%. Of the 15 misplaced pedicle screws (grades 2 and 3), 11 were lateral pedicle perforations, 3 were superior perforations and 1 was an inferior perforation. There were no neurovascular injuries related to CPS misplacement.ConclusionsWith our technique, the optimal entry point and two angles (PTA and PLMA) were identified for CPS insertion. The novel CPS insertion technique assisted by a special angular scale provides high accuracy and few complications.

Project description:To determine the entry for the dorsal pedicular screw in relation to the notch present at the junction of base of the lateral margin of superior articular process with superior border of transverse process in dorsal spine. The advantage of this technique is a constant and easily identifiable entry point which does not involve partial resection of the inferior facet, thus maintaining stability and maintaining the well defined transverse and sagittal screw angles and decreasing the incidence of medial and inferior pedicle violation.The study was carried out using ten cadavers (four male and six female). Spinal column was dissected completely from cadavers. Before the experiment, normal anatomy was confirmed on all cadavers excluding cases of spinal deformity. Dissection was done by the spine surgeons taking care to preserve all the bony landmarks near the entry point. This study was carried out bilaterally on pedicles between the first and twelfth thoracic (T) vertebrae.The relation of the superior articular notch and transverse process to the thoracic spine pedicles was studied. It was found that superior third of the pedicle was related to the superior articular notch and the transverse process in the first five thoracic vertebrae. The relation of these structures to the pedicle of the sixth thoracic vertebra was somewhat equally distributed between the superior and middle third of the pedicle. From the 7th to 12th thoracic vertebrae the superior articular process and transverse process were related to the middle third of the pedicle in almost all the cases. It is important to note that the inferior 1/3rd of the pedicle was not related to these landmarks at any of the levels.We conclude that the ideal pedicle entry point described here should be considered by surgeons during thoracic pedicle screw instrumentation. The notch at the base of the superior articular process will always remain constant and therefore an important anatomical landmark in guiding the screw toward the entry of the pedicle.

Project description:Study designGlobal cross-sectional survey.ObjectiveThe aim of this study was to validate the AO Spine Subaxial Cervical Spine Injury Classification by examining the perceived injury severity by surgeon across AO geographical regions and practice experience.Summary of background dataPrevious subaxial cervical spine injury classifications have been limited by subpar interobserver reliability and clinical applicability. In an attempt to create a universally validated scheme with prognostic value, AO Spine established a subaxial cervical spine injury classification involving four elements: injury morphology, facet injury involvement, neurologic status, and case-specific modifiers.MethodsA survey was sent to 272 AO Spine members across all geographic regions and with a variety of practice experience. Respondents graded the severity of each variable of the classification system on a scale from zero (low severity) to 100 (high severity). Primary outcome was to assess differences in perceived injury severity for each injury type over geographic regions and level of practice experience.ResultsA total of 189 responses were received. Overall, the classification system exhibited a hierarchical progression in subtype injury severity scores. Only three subtypes showed a significant difference in injury severity score among geographic regions: F3 (floating lateral mass fracture, P = 0.04), N3 (incomplete spinal cord injury, P = 0.03), and M2 (critical disk herniation, P = 0.04). When stratified by surgeon experience, pairwise comparison showed only two morphological subtypes, B1 (bony posterior tension band injury, P = 0.02) and F2 (unstable facet fracture, P = 0.03), and one neurologic subtype (N3, P = 0.02) exhibited a significant difference in injury severity score.ConclusionThe AO Spine Subaxial Cervical Spine Injury Classification System has shown to be reliable and suitable for proper patient management. The study shows this classification is substantially generalizable by geographic region and surgeon experience, and provides a consistent method of communication among physicians while covering the majority of subaxial cervical spine traumatic injuries.Level of Evidence: 4.

Dataset Information

Subaxial Cervical Pedicular Screw Insertion via the Nonanatomic Axis: Identification of Entry Point and Trajectory Based on a Radiographic Study and Workshop.

Study design

Objective

Methods

Results

Conclusion

Publications

Subaxial Cervical Pedicular Screw Insertion via the Nonanatomic Axis: Identification of Entry Point and Trajectory Based on a Radiographic Study and Workshop.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets