On a new efficient Steffensen-like iterative class by applying a suitable self-accelerator parameter.
Ontology highlight
ABSTRACT:
SUBMITTER: Lotfi T
PROVIDER: S-EPMC3960562 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Laser-plasma wakefield accelerators have seen tremendous progress, now capable of producing quasi-monoenergetic electron beams in the GeV energy range with few-femtoseconds bunch duration. Scaling these accelerators to the nanocoulomb range would yield hundreds of kiloamperes peak current and stimulate the next generation of radiation sources covering high-field THz, high-brightness X-ray and γ-ray sources, compact free-electron lasers and laboratory-size beam-driven plasma accelerators. However, accelerators generating such currents operate in the beam loading regime where the accelerating field is strongly modified by the self-fields of the injected bunch, potentially deteriorating key beam parameters. Here we demonstrate that, if appropriately controlled, the beam loading effect can be employed to improve the accelerator's performance. Self-truncated ionization injection enables loading of unprecedented charges of ∼0.5 nC within a mono-energetic peak. As the energy balance is reached, we show that the accelerator operates at the theoretically predicted optimal loading condition and the final energy spread is minimized.Higher beam quality and stability are desired in laser-plasma accelerators for their applications in compact light sources. Here the authors demonstrate in laser plasma wakefield electron acceleration that the beam loading effect can be employed to improve beam quality by controlling the beam charge.
| S-EPMC5591198 | biostudies-literature
Project description:As iterative reconstruction in Computed Tomography (CT) is an ill-posed problem, additional prior information has to be used to get a physically meaningful result (close to ground truth if available). However, the amount of influence of the regularisation prior is crucial to the outcome of the reconstruction. Therefore, we propose a scheme for tuning the strength of the prior via a certain image metric. In this work, the parameter is tuned for minimal histogram entropy in selected regions of the reconstruction as histogram entropy is a very basic approach to characterise the information content of data. We performed a sweep over different regularisation parameters showing that the histogram entropy is a suitable metric as it is well behaved over a wide range of parameters. The parameter determination is a feedback loop approach we applied to numerically simulated FORBILD phantom data and verified with an experimental measurement of a micro-CT device. The outcome is evaluated visually and quantitatively by means of root mean squared error (RMSE) and structural similarity (SSIM) for the simulation and visually for the measured sample (no ground truth available). The final reconstructed images exhibit noise-suppressed iterative reconstruction. For both datasets, the optimisation is robust where its initial value is concerned. The parameter tuning approach shows that the proposed metric-driven feedback loop is a promising tool for finding a suitable regularisation parameter in statistical iterative reconstruction.
| S-EPMC6461679 | biostudies-literature
Project description:Azanucleosides, sugar-modified nucleoside analogues containing a 4' nitrogen atom, have shown a lot of therapeutic potential, e.g. as anti-cancer and antiviral agents. We report the synthesis of a series of 2'-homoazanucleosides, in which the nucleobase is attached to the 2'-position of the pyrrolidine ring via a methylene linker. A suitable orthogonally protected iminosugar was synthesized by ring closing metathesis and dihydroxylation as key steps and further converted to a series of 8 nucleoside analogues through Mitsunobu reaction with suitably protected nucleobases. The 5' position of the adenine analogue was then further derivatized with thiols to afford 2 additional compounds. The final compounds were evaluated for biological activity.
| S-EPMC7111761 | biostudies-literature
Project description:Chemical reaction optimization (RO) is an iterative process that results in large, high-dimensional datasets. Current tools allow for only limited analysis and understanding of parameter spaces, making it hard for scientists to review or follow changes throughout the process. With the recent emergence of using artificial intelligence (AI) models to aid RO, another level of complexity has been added. Helping to assess the quality of a model's prediction and understand its decision is critical to supporting human-AI collaboration and trust calibration. To address this, we propose CIME4R-an open-source interactive web application for analyzing RO data and AI predictions. CIME4R supports users in (i) comprehending a reaction parameter space, (ii) investigating how an RO process developed over iterations, (iii) identifying critical factors of a reaction, and (iv) understanding model predictions. This facilitates making informed decisions during the RO process and helps users to review a completed RO process, especially in AI-guided RO. CIME4R aids decision-making through the interaction between humans and AI by combining the strengths of expert experience and high computational precision. We developed and tested CIME4R with domain experts and verified its usefulness in three case studies. Using CIME4R the experts were able to produce valuable insights from past RO campaigns and to make informed decisions on which experiments to perform next. We believe that CIME4R is the beginning of an open-source community project with the potential to improve the workflow of scientists working in the reaction optimization domain. SCIENTIFIC CONTRIBUTION: To the best of our knowledge, CIME4R is the first open-source interactive web application tailored to the peculiar analysis requirements of reaction optimization (RO) campaigns. Due to the growing use of AI in RO, we developed CIME4R with a special focus on facilitating human-AI collaboration and understanding of AI models. We developed and evaluated CIME4R in collaboration with domain experts to verify its practical usefulness.
| S-EPMC11636728 | biostudies-literature
Project description:BackgroundPatients who undergo accelerator-based (AB) boron neutron capture therapy (BNCT) for head and neck cancer in the sitting position are generally uncomfortably immobilized, and patient motion during this treatment may be greater than that in other radiotherapy techniques. Furthermore, the treatment time of BNCT is relatively long (up to approximately 1 h), which increases the possibility of patient movement during treatment. As most BNCT irradiations are performed in a single fraction, the dosimetric error due to patient motion is of greater consequence and needs to be evaluated and accounted for. Several treatment parameters are required for BNCT dose calculation.PurposeTo investigate the dosimetric impacts (DIs) against position errors using a simple cylindrical phantom for an AB-BNCT system under different treatment parameter settings.MethodsThe treatment plans were created in RayStation and the dose calculation was performed using the NeuCure® dose engine. A cylindrical phantom (16 cm diameter × 20 cm height) made of soft tissue was modeled. Dummy tumors in the form of a 3-cm-diameter sphere were arranged at depths of 2.5 and 6.5 cm (denoted by T2.5 and T6.5 , respectively). Reference plans were created by setting the following parameters: collimator size = 10, 12, or 15 cm in diameter, collimator-to-surface distance (CSD) = 4.0 or 8.0 cm, tumor-to-blood ratio (T/B ratio) using 18 F-fluoro-borono-phenylalanine = 2.5 or 5.0, and 10 B concentration in blood = 20, 25, or 30 ppm. The prescribed dose was D95% ≥ 20 Gy-eq for both T2.5 and T6.5 . Based on the reference plans, phantom-shifted plans were created in 26 directions [all combinations of left-right (LR), anterior-posterior (AP), and superior-inferior (SI) directions) and three distances (1.0, 2.0, and 3.0 cm). The DIs were evaluated at D80% of the tumors. The shift direction dependency of the DI in the LR, AP, and SI directions was evaluated by conducting a multiple regression analysis (MRA) and other analyses where required.ResultsThe coefficients of the MRA of the DIs for LR, AP, and SI shifts were -0.08, 2.16, and -0.04 (p-values = 0.084, <0.01, and 0.334) for T2.5 and -0.05, 2.08, and 0.15 (p-values = 0.526, <0.01, and 0.065) for T6.5 , respectively. The analysis of variance showed that DIs due to the AP shift were significantly greater for smaller collimator sizes on T2.5 and smaller CSD on T6.5 . Dose reduction due to SI or LR (lateral) shifts was significantly greater for smaller collimator sizes on both T2.5 and T6.5 and smaller CSD on T2.5 , according to the Student's t-test. There were no significant differences in the DIs against both the AP shift and the lateral shift between the different T/B ratios and 10 B concentrations.ConclusionThe DIs were largely affected by the shift in the AP direction and were influenced by the different treatment parameters.
| S-EPMC9541895 | biostudies-literature
Project description:Pickering emulsions offer important advantages over conventional surfactant-stabilized emulsions, including enhanced long-term stability, more reproducible formulations and reduced foaming problems. The recent development of polymerization-induced self-assembly (PISA) offers considerable scope for the design of a wide range of block copolymer nanoparticles with tunable surface wettability that may serve as bespoke Pickering emulsifiers. In the present study, we exploit PISA to design a series of model framboidal ABC triblock copolymer vesicles with exquisite control over surface roughness. Transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) were utilized to characterize these nanoparticles, which were subsequently used to stabilize n-dodecane emulsion droplets in water. The adsorption efficiency, Aeff, of the nanoparticles at the n-dodecane/water interface was determined as a function of increasing vesicle surface roughness using a turbidimetry assay. A strong correlation between surface roughness and Aeff was observed, with Aeff increasing from 36% up to 94%. This is a significant improvement in Pickering emulsifier efficiency compared to that reported previously for similar vesicles with smooth surfaces. In summary, nanoparticles with appreciable surface roughness are much more effective Pickering emulsifiers and this parameter can be readily fine-tuned using a highly efficient PISA formulation.
| S-EPMC6054058 | biostudies-literature
Project description:BackgroundClustering is one of the most commonly used methods for discovering hidden structure in microarray gene expression data. Most current methods for clustering samples are based on distance metrics utilizing all genes. This has the effect of obscuring clustering in samples that may be evident only when looking at a subset of genes, because noise from irrelevant genes dominates the signal from the relevant genes in the distance calculation.ResultsWe describe an algorithm for automatically detecting clusters of samples that are discernable only in a subset of genes. We use iteration between Minimal Spanning Tree based clustering and feature selection to remove noise genes in a step-wise manner while simultaneously sharpening the clustering. Evaluation of this algorithm on synthetic data shows that it resolves planted clusters with high accuracy in spite of noise and the presence of other clusters. It also shows a low probability of detecting spurious clusters. Testing the algorithm on some well known micro-array data-sets reveals known biological classes as well as novel clusters.ConclusionsThe iterative clustering method offers considerable improvement over clustering in all genes. This method can be used to discover partitions and their biological significance can be determined by comparing with clinical correlates and gene annotations. The MATLAB programs for the iterative clustering algorithm are available from http://linus.nci.nih.gov/supplement.html
| S-EPMC520744 | biostudies-literature
Project description:The onset and progression of pathological heart conditions, such as cardiomyopathy or heart failure, affect its mechanical behaviour due to the remodelling of the myocardial tissues to preserve its functional response. Identification of the constitutive properties of heart tissues could provide useful biomarkers to diagnose and assess the progression of disease. We have previously demonstrated the utility of efficient AI-surrogate models to simulate passive cardiac mechanics. Here, we propose the use of this surrogate model for the identification of myocardial mechanical properties and intra-ventricular pressure by solving an inverse problem with two novel AI-based approaches. Our analysis concluded that: (i) both approaches were robust toward Gaussian noise when the ventricle data for multiple loading conditions were combined; and (ii) estimates of one and two parameters could be obtained in less than 9 and 18 s, respectively. The proposed technique yields a viable option for the translation of cardiac mechanics simulations and biophysical parameter identification methods into the clinic to improve the diagnosis and treatment of heart pathologies. In addition, the proposed estimation techniques are general and can be straightforwardly translated to other applications involving different anatomical structures.
| S-EPMC8551833 | biostudies-literature
Project description:The preservation of emittance of the accelerating beam is the next challenge for plasma-based accelerators envisioned for future light sources and colliders. The field structure of a highly nonlinear plasma wake is potentially suitable for this purpose but has not been yet measured. Here we show that the longitudinal variation of the fields in a nonlinear plasma wakefield accelerator cavity produced by a relativistic electron bunch can be mapped using the bunch itself as a probe. We find that, for much of the cavity that is devoid of plasma electrons, the transverse force is constant longitudinally to within ±3% (r.m.s.). Moreover, comparison of experimental data and simulations has resulted in mapping of the longitudinal electric field of the unloaded wake up to 83 GV m(-1) to a similar degree of accuracy. These results bode well for high-gradient, high-efficiency acceleration of electron bunches while preserving their emittance in such a cavity.
| S-EPMC4990705 | biostudies-literature
Project description:Photonic integrated circuits have been extensively explored for optical processing with the aim of breaking the speed and energy efficiency bottlenecks of digital electronics. However, the input/output (IO) bottleneck remains one of the key barriers. Here we report a photonic iterative processor (PIP) for matrix-inversion-intensive applications. The direct reuse of inputted data in the optical domain unlocks the potential to break the IO bottleneck. We demonstrate notable IO advantages with a lossless PIP for real-valued matrix inversion and integral-differential equation solving, as well as a coherent PIP with optical loops integrated on-chip, enabling complex-valued computation and a net inversion time of 1.2 ns. Furthermore, we estimate at least an order of magnitude enhancement in IO efficiency of a PIP over photonic single-pass processors and the state-of-the-art electronic processors for reservoir training tasks and multiple-input and multiple-output (MIMO) precoding tasks, indicating the huge potential of PIP technology in practical applications.
| S-EPMC11251023 | biostudies-literature