Photoregenerative I⁻/I₃⁻ couple as a liquid cathode for proton exchange membrane fuel cell.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu Z
PROVIDER: S-EPMC4210939 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Proton exchange membrane fuel cells have been recently developed at an increasing pace as clean energy conversion devices for stationary and transport sector applications. High platinum cathode loadings contribute significantly to costs. This is why improved catalyst and support materials as well as catalyst layer design are critically needed. Recent advances in nanotechnologies and material sciences have led to the discoveries of several highly promising families of materials. These include platinum-based alloys with shape-selected nanostructures, platinum-group-metal-free catalysts such as metal-nitrogen-doped carbon materials and modification of the carbon support to control surface properties and ionomer/catalyst interactions. Furthermore, the development of advanced characterization techniques allows a deeper understanding of the catalyst evolution under different conditions. This review focuses on all these recent developments and it closes with a discussion of future research directions in the field.
| S-EPMC8514433 | biostudies-literature
Project description:In this study, a sulfonated poly(ether sulfone) having cardo-type fluorenyl groups (FL-SPES) was investigated as a cathodic binder to improve fuel cell performance via increased the oxygen diffusion in the cathode. The maximum power density achieved by using the membrane electrode assembly (MEA) prepared with FL-SPES with a low ion exchange capacity (IEC) of 1.31 meq g-1 was 520 mW cm-2, which is more than twice as high as that of BP-SPES (210 mW cm-2) having typical biphenyl groups with a similar IEC. At high IEC of 1.55 meq g-1, the power density obtained by using BP-SPES was improved to 454 mW cm-2 but remained lower than that of FL-SPES. In addition, although the IEC, swelling degree, and specific resistance were similar to each other, the gas permeability of FL-SPES was improved by approximately three times compared to that of BP-SPES. The steric structure of cardo-type FL-SPES increased the free volume between the polymer backbones, leading to an increase in gas transfer. Consequently, oxygen diffusion was promoted at the cathode, resulting in improved fuel cell performance.
| S-EPMC9386007 | biostudies-literature
Project description:The cathode microporous layer (MPL), as one of the key components of the proton exchange membrane fuel cell (PEM-FC), requires specialized carbon materials to ensure the two-phase flow and interfacial effects. In this respect, we designed a novel MPL based on highly hydrophobic carbon nanowalls (CNW). Employing plasma-assisted chemical vapor deposition techniques directly on carbon paper, we produced high-quality microporous layers at a competitive yield-to-cost ratio with distinctive MPL properties: high porosity, good stability, considerable durability, high hydrophobicity, and substantial conductivity. The specific morphological and structural properties were determined by scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. Thermo-gravimetric analysis was employed to study the nanostructures' thermal stability and contact angle measurements were performed on the CNW substrate to study the hydrophobic character. Platinum ink, serving as a fuel cell catalyst, was sprayed directly onto the MPLs and incorporated in the FC assembly by hot-pressing against a polymeric membrane to form the membrane-electrode assembly and gas diffusion layers. Single-fuel-cell testing, at moderate temperature and humidity, revealed improved power performance comparable to industrial quality membrane assemblies (500 mW cm-2 mg-1 of cathodic Pt load at 80 °C and 80% RH), with elevated working potential (0.99 V) and impeccable fuel crossover for a low-cost system.
| S-EPMC9698599 | biostudies-literature
Project description:Proton exchange membrane fuel cells (PEMFCs) are promising clean energy conversion devices in residential, transportation, and portable applications. Currently, a high-pressure tank is the state-of-the-art mode of hydrogen storage; however, the energy cost, safety, and portability (or volumetric hydrogen storage capacity) presents a major barrier to the widespread dissemination of PEMFCs. Here we show an 'all-polymer type' rechargeable PEMFC (RCFC) that contains a hydrogen-storable polymer (HSP), which is a solid-state organic hydride, as the hydrogen storage media. Use of a gas impermeable SPP-QP (a polyphenylene-based PEM) enhances the operable time, reaching up to ca. 10.2 s mgHSP-1, which is more than a factor of two longer than that (3.90 s mgHSP-1) for a Nafion NRE-212 membrane cell. The RCFCs are cycleable, at least up to 50 cycles. The features of this RCFC system, including safety, ease of handling, and light weight, suggest applications in mobile, light-weight hydrogen-based energy devices.
| S-EPMC9814259 | biostudies-literature
Project description:The lack of efficient and durable proton exchange membrane fuel cell electrocatalysts for the oxygen reduction reaction is still restraining the present hydrogen technology. Graphene-based carbon materials have emerged as a potential solution to replace the existing carbon black (CB) supports; however, their potential was never fully exploited as a commercial solution because of their more demanding properties. Here, a unique and industrially scalable synthesis of platinum-based electrocatalysts on graphene derivative (GD) supports is presented. With an innovative approach, highly homogeneous as well as high metal loaded platinum-alloy (up to 60 wt %) intermetallic catalysts on GDs are achieved. Accelerated degradation tests show enhanced durability when compared to the CB-supported analogues including the commercial benchmark. Additionally, in combination with X-ray photoelectron spectroscopy Auger characterization and Raman spectroscopy, a clear connection between the sp 2 content and structural defects in carbon materials with the catalyst durability is observed. Advanced gas diffusion electrode results show that the GD-supported catalysts exhibit excellent mass activities and possess the properties necessary to reach high currents if utilized correctly. We show record-high peak power densities in comparison to the prior best literature on platinum-based GD-supported materials which is promising information for future application.
| S-EPMC9361283 | biostudies-literature
Project description:Proton Exchange Membrane Fuel Cells (PEMFCs) offer a clean and sustainable alternative to traditional engines. PEMFCs play a vital role in progressing hydrogen-based energy solutions. Accurate modeling of PEMFC performance is essential for enhancing their efficiency. This paper introduces a novel reinforcement learning (RL) approach for estimating PEMFC parameters, addressing the challenges of the complex and nonlinear dynamics of the PEMFCs. The proposed RL method minimizes the sum of squared errors between measured and simulated voltages and provides an adaptive and self-improving RL-based Estimation that learns continuously from system feedback. The RL-based approach demonstrates superior accuracy and performance compared with traditional metaheuristic techniques. It has been validated through theoretical and experimental comparisons and tested on commercial PEMFCs, including the Temasek 1 kW, the 6 kW Nedstack PS6, and the Horizon H-12 12 W. The dataset used in this study comes from experimental data. This research contributes to the precise modeling of PEMFCs, improving their efficiency, and developing wider adoption of PEMFCs in sustainable energy solutions.
| S-EPMC11551159 | biostudies-literature
Project description:Hydrogen is a promising energy vector for storing renewable energies: obtained from water-splitting, in electrolysers or photoelectrochemical cells, it can be turned back to electricity on demand in fuel cells (FCs). Proton exchange membrane (PEM) devices with low internal resistance, high compactness and stability are an attractive technology optimized over decades, affording fast start-up times and low operating temperatures. However, they rely on the powerful catalytic properties of noble metals such as platinum, while lower cost, more abundant materials would be needed for economic viability. Replacing these noble metals at both electrodes has long proven to be a difficult task, so far incompatible with PEM technologies. Here we take advantage of newly developed bio-inspired molecular H2 oxidation catalysts and noble metal-free O2-reducing materials, to fabricate a noble metal-free PEMFC, with an 0.74 V open circuit voltage and a 23 μW cm-2 output power under technologically relevant conditions. X-ray absorption spectroscopy measurements confirm that the catalysts are stable and retain their structure during turnover.
| S-EPMC5654240 | biostudies-literature
Project description:Proton exchange membrane fuel cells, consuming hydrogen and oxygen to generate clean electricity and water, suffer acute liquid water challenges. Accurate liquid water modelling is inherently challenging due to the multi-phase, multi-component, reactive dynamics within multi-scale, multi-layered porous media. In addition, currently inadequate imaging and modelling capabilities are limiting simulations to small areas (<1 mm2) or simplified architectures. Herein, an advancement in water modelling is achieved using X-ray micro-computed tomography, deep learned super-resolution, multi-label segmentation, and direct multi-phase simulation. The resulting image is the most resolved domain (16 mm2 with 700 nm voxel resolution) and the largest direct multi-phase flow simulation of a fuel cell. This generalisable approach unveils multi-scale water clustering and transport mechanisms over large dry and flooded areas in the gas diffusion layer and flow fields, paving the way for next generation proton exchange membrane fuel cells with optimised structures and wettabilities.
| S-EPMC9929041 | biostudies-literature
Project description:Precise models predicting fuel cell performance under different operating conditions require accurate parameter identification in a proton exchange membrane fuel cell (PEMFC). Most traditional parameter estimation methodologies depend on optimization algorithms which are limited in their efficiency, convergence speed, and robustness. Typically, existing algorithms fail to achieve a balance between precision and computational efficiency, leading to suboptimal modeling of the complex, nonlinear behavior of PEMFCs. In this paper, we present the two-stage differential evolution (TDE) algorithm, which fills these gaps by using a new mutation strategy that improves solution diversity and speeds up convergence. Seven critical unknown parameters ([Formula: see text] and λ) in PEMFC models are identified by using the proposed TDE algorithm. The optimization process is to minimize the sum of squared errors (SSE) between the experimentally measured and predicted cell voltages. TDE resulted in a 41% reduction in SSE (minimum SSE of 0.0255 compared to 0.0432), a 92% improvement in maximum SSE, and over 99.97% reduction in standard deviation compared to the HARD-DE algorithm. Furthermore, TDE was shown to be 98% more efficient than HARD-DE, with a runtime of 0.23 s, compared to HARD-DE's runtime of 11.95 s. Extensive testing of these advancements was performed on six commercially available PEMFC stacks over twelve case studies, and I/V and P/V characteristics were confirmed to be consistent with experimental data. The results show that TDE has better accuracy, robustness and computational efficiency than the other methods, and therefore TDE can be used as a real time PEMFC parameter estimation tool.
| S-EPMC11825906 | biostudies-literature
Project description:Operation of proton-exchange membrane fuel cells is highly deteriorated by mass transfer loss, which is a result of spatial and temporal interaction between airflow, water flow, channel geometry, and its wettability. Prediction of two-phase flow dynamics in gas channels is essential for the optimization of the design and operating of fuel cells. We propose a mechanistic discrete particle model (DPM) to delineate dynamic water distribution in fuel cell gas channels and optimize the operating conditions. Similar to the experimental observations, the model predicts seven types of flow regimes from isolated, side wall, corner, slug, film, and plug flow droplets for industrial temporal and spatial scales. Consequently, two-phase flow regime maps are proposed. The results suggest that an increase in water accumulation in the channel is related to the increase in the water cluster density emerging from the gas diffusion layer rather than the increased water flow rate through constant water pathways. From a modeling perspective, the DPM replicated well volume-of-fluid channel simulation results in terms of saturation, water coverage ratio, and interface locations with an estimated 5 orders of magnitude increase in calculation speed.
| S-EPMC8552217 | biostudies-literature