Direct Growth and Controlled Coalescence of Thick AlN Template on Micro-circle Patterned Si Substrate.
Ontology highlight
ABSTRACT:
SUBMITTER: Tran BT
PROVIDER: S-EPMC4593966 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Interconnected pathways in 3D bioartificial organs are essential to retaining cell activity in thick functional 3D tissues. 3D bioprinting methods have been widely explored in biofabrication of functionally patterned tissues; however, these methods are costly and confined to thin tissue layers due to poor control of low-viscosity bioinks. Here, cell-laden hydrogels that could be precisely patterned via water-soluble gelatin templates are constructed by economical extrusion 3D printed plastic templates. Tortuous co-continuous plastic networks, designed based on triply periodic minimal surfaces (TPMS), serve as a sacrificial pattern to shape the secondary sacrificial gelatin templates. These templates are eventually used to form cell-encapsulated gelatin methacryloyl (GelMA) hydrogel scaffolds patterned with the complex interconnected pathways. The proposed fabrication process is compatible with photo-crosslinkable hydrogels wherein prepolymer casting enables incorporation of high cell populations with high viability. The cell-laden hydrogel constructs are characterized by robust mechanical behavior. In vivo studies demonstrate a superior cell ingrowth into the highly permeable constructs compared to the bulk hydrogels. Perfusable complex interconnected networks within cell-encapsulated hydrogels may assist in engineering thick and functional tissue constructs through the permeable internal channels for efficient cellular activities in vivo.
| S-EPMC8986588 | biostudies-literature
Project description:Micro- and nanostructures in vapor-phase-grown AlN on face-to-face annealed sputtered AlN (FFA Sp-AlN) templates formed on nanopatterned sapphire substrates (NPSS) were comprehensively analyzed using transmission electron microscopy. The comparison between metal-organic vapor-phase epitaxy-grown AlN/FFA Sp-AlN/hole-type NPSS (Sample MOH) and hydride vapor-phase epitaxy-grown AlN/FFA Sp-AlN/cone-type NPSS (Sample HVC) showed apparent differences in the morphology of dislocation propagation, presence of voids, shape of polarity inversion boundaries, and crystal structure on the slope region of NPSS. Notably, cross-sectional and plan-view observations revealed that the quality of FFA Sp-AlN significantly affects the threading dislocation density in the vapor-phase-grown layer. At the slope region of the AlN/NPSS interface, γ-AlON was observed in the MOH sample, while highly misaligned AlN grains were observed in the HVC sample. These characteristic crystal structures affect the occurrence of dislocations via different mechanisms in each sample. This study provides practical information for strategically controlling the micro- and nanostructures formed in AlN/NPSS structures for high-performance AlGaN-based deep-ultraviolet emitters.Supplementary informationThe online version contains supplementary material available at 10.1007/s11664-023-10348-3.
| S-EPMC10054194 | biostudies-literature
Project description:We have demonstrated for the first time the hybrid development of next-generation 3-D hierarchical GaN/InGaN multiple-quantum-well nanowires on a patterned Si nanowire-template. The patterned Si nanowire-template is fabricated using metal-assisted chemical-etching, and the conformal growth of the GaN/InGaN multiple-quantum-well (MQW) coaxial nanowires is conducted using metal-organic-chemical-vapor-deposition by the two-step growth approach of vapor-liquid-solid for the GaN core and vapor-solid for the GaN/InGaN MQW shells. The growth directions of the GaN nanowires are confirmed by transmission electron microscopy and selected area electron diffraction patterns. The emission of the GaN/InGaN MQW nanowire is tuned from 440 nm to 505 nm by increasing the InGaN quantum-well thickness. The carrier dynamics were evaluated by performing temperature-dependent time-resolved photoluminescence measurement, and the radiative lifetime of photogenerated electron-hole pairs was found to range from 30 to 35 ps. A very high IQE of 56% was measured due to the suppressed quantum-confined Stark effect which was enabled by the semi-polar growth facet of the GaN/InGaN MQWs. The demonstration of the growth of the hybrid 3-D hierarchical GaN/InGaN MQW nanowires provides a seamless platform for a broad range of multifunctional optical and electronic applications.
| S-EPMC9417695 | biostudies-literature
Project description:The present research is focused on the development of a biofunctionalized hydrogel with a surface diffractive micropattern as a label-free biosensing platform. The biosensors described in this paper were fabricated with a holographic recording of polyethylene terephthalate (PET) surface micro-structures, which were then transferred into a hydrogel material. Acrylamide-based hydrogels were obtained with free radical polymerization, and propargyl acrylate was added as a comonomer, which allowed for covalent immobilization of thiolated oligonucleotide probes into the hydrogel network, via thiol-yne photoclick chemistry. The comonomer was shown to significantly contribute to the immobilization of the probes based on fluorescence imaging. Two different immobilization approaches were demonstrated: during or after hydrogel synthesis. The second approach showed better loading capacity of the bioreceptor groups. Diffraction efficiency measurements of hydrogel gratings at 532 nm showed a selective response reaching a limit of detection in the complementary DNA strand of 2.47 µM. The label-free biosensor as designed could significantly contribute to direct and accurate analysis in medical diagnosis as it is cheap, easy to fabricate, and works without the need for further reagents.
| S-EPMC10046352 | biostudies-literature
Project description:High-quality and crack-free aluminum nitride (AlN) film on sapphire substrate is the foundation for high-efficiency aluminum gallium nitride (AlGaN)-based deep ultraviolet light-emitting diodes (DUV LEDs). We reported the growth of high-quality and crack-free AlN film on sapphire substrate with a nanometer-scale-thick AlN nucleation layer (NL). Three kinds of nanometer-scale-thick AlN NLs, including in situ low-temperature AlN (LT-AlN) NL, oxygen-undoped ex situ sputtered AlN NL, and oxygen-doped ex situ sputtered AlN NL, were prepared for epitaxial growth of AlN films on sapphire substrates. The influence of nanoscale AlN NL thickness on the optical transmittance, strain state, surface morphology, and threading dislocation (TD) density of the grown AlN film on sapphire substrate were carefully investigated. The average optical transmittance of AlN film on sapphire substrate with oxygen-doped sputtered AlN NL was higher than that of AlN films on sapphire substrates with LT-AlN NL and oxygen-undoped sputtered AlN NL in the 200-270 nm wavelength region. However, the AlN film on sapphire substrate with oxygen-undoped sputtered AlN NL had the lowest TD density among AlN films on sapphire substrates. The AlN film on sapphire substrate with the optimum thickness of sputtered AlN NL showed weak tensile stress, a crack-free surface, and low TD density. Furthermore, a 270-nm AlGaN-based DUV LED was grown on the high-quality and crack-free AlN film. We believe that our results offer a promising and practical route for obtaining high-quality and crack-free AlN film for DUV LED.
| S-EPMC6915436 | biostudies-literature
Project description:A fast, simple, scalable technique is described for the controlled, solution-based, electrochemical synthesis of patterned metallic and semiconducting nanowires from reusable, nonsacrificial, ultrananocrystalline diamond (UNCD) templates. This enables the repeated fabrication of arrays of complex patterns of nanowires, potentially made of any electrochemically depositable material. Unlike all other methods of patterning nanowires, this benchtop technique quickly mass-produces patterned nanowires whose diameters are not predefined by the template, without requiring intervening vacuum or clean room processing. This technique opens a pathway for studying nanoscale phenomena with minimal equipment, allowing the process-scale development of a new generation of nanowire-based devices.
| S-EPMC3082999 | biostudies-literature
Project description:Constant advance in improving the luminous efficacy (ηL) of nitride-based light-emitting diodes (LEDs) plays a critical role for saving measurable amounts of energy. Further development is motivated to approach the efficiency limit for this material system while reducing the costs. In this work, strategies of using thin AlN prebuffer and transitional-refraction-index patterned sapphire substrate (TPSS) were proposed, which pushed up the efficiency of white LEDs (WLEDs). The AlN prebuffer was obtained through physical vapor deposition (PVD) method and TPSS was fabricated by dry-etched periodic silica arrays covered on sapphire. Devices in mass production confirmed that PVD AlN prebuffer was able to improve the light output power (φe) of blue LEDs (BLEDs) by 2.53% while increasing the productivity by ~8% through shortening the growth time. Additionally, BLEDs on TPSS exhibited an enhanced top ηext of 5.65% in contrast to BLEDs on the conventional PSS through Monte Carlo ray-tracing simulation. Consequently, φe of BLEDs was experimentally enhanced by 10% at an injected current density (Jin) of 40 A/cm2. A peak ηL of 295.2 lm/W at a Jin of 0.9 A/cm2 and the representative ηL of 282.4 lm/W at a Jin of 5.6 A/cm2 for phosphor-converted WLEDs were achieved at a correlated color temperature of 4592 K.
| S-EPMC9147444 | biostudies-literature
Project description:The ability to control the polarity of an all-sputtered epitaxial GaN/AlN/Al film on a Si(111) substrate via intermediate oxidization was investigated. A stable surface of GaN on a Si substrate is a N-terminated surface (-c surface); hence, for electric device applications, the Ga-terminated surface (+c surface) is preferable. The GaN/AlN/Al film on Si(111) showed a -c surface, as confirmed by time-of-flight low-energy atom scattering spectroscopy (TOFLAS) and X-ray photoelectron spectroscopy (XPS). The AlN layer was intentionally oxidized via air exposure during film growth. The GaN surface subjected to the oxidization process had the +c surface. Secondary-ion mass spectrometry measurements indicated a high oxygen concentration after the intentional oxidization. However, the intentional oxidization degraded the crystallinity of the GaN/AlN layer. By changing the oxidization point and repeating the GaN/AlN growth, the crystallinity of GaN was recovered. Such polarity control of GaN on Si grown by sputtering shows strong potential for the fabrication of large-diameter +c-GaN template substrates at low cost.
| S-EPMC9202052 | biostudies-literature
Project description:The growth of >100-μm-thick diamond layers adherent on aluminum nitride with low thermal boundary resistance between diamond and AlN is presented in this work. The thermal barrier resistance was found to be in the range of 16 m2·K/GW, which is a large improvement on the current state-of-the-art. While thick films failed to adhere on untreated AlN films, AlN films treated with hydrogen/nitrogen plasma retained the thick diamond layers. Clear differences in ζ-potential measurement confirm surface modification due to hydrogen/nitrogen plasma treatment. An increase in non-diamond carbon in the initial layers of diamond grown on pretreated AlN is seen by Raman spectroscopy. The presence of non-diamond carbon has minimal effect on the thermal barrier resistance. The surfaces studied with X-ray photoelectron spectroscopy revealed a clear distinction between pretreated and untreated samples. The surface aluminum goes from a nitrogen-rich environment to an oxygen-rich environment after pretreatment. A clean interface between diamond and AlN is seen by cross-sectional transmission electron microscopy.
| S-EPMC6823629 | biostudies-literature
Project description:Loss of contractility and acquisition of an epithelial phenotype of vascular smooth muscle cells (VSMCs) are key events in proliferative vascular pathologies such as atherosclerosis and post-angioplastic restenosis. There is no proper cell culture system allowing VSMC differentiation so that it is difficult to delineate the molecular mechanism responsible for proliferative vasculopathy. We investigated whether a micro-patterned substrate could restore the contractile phenotype of VSMCs in vitro. To induce and maintain the differentiated VSMC phenotype in vitro, we introduced a micro-patterned groove substrate to modulate the morphology and function of VSMCs.
2013-11-14 | E-MTAB-1888 | biostudies-arrayexpress