Detection of orbital angular momentum using a photonic integrated circuit.
Ontology highlight
ABSTRACT: Orbital angular momentum (OAM) state of photons offer an attractive additional degree of freedom that has found a variety of applications. Measurement of OAM state, which is a critical task of these applications, demands photonic integrated devices for improved fidelity, miniaturization, and reconfiguration. Here we report the design of a silicon-integrated OAM receiver that is capable of detecting distinct and variable OAM states. Furthermore, the reconfiguration capability of the detector is achieved by applying voltage to the GeSe film to form gratings with alternate states. The resonant wavelength for arbitrary OAM state is demonstrated to be tunable in a quasi-linear manner through adjusting the duty cycle of the gratings. This work provides a viable approach for the realization of a compact integrated OAM detection device with enhanced functionality that may find important applications in optical communications and information processing with OAM states.
Project description:Light-carrying orbital angular momentum (OAM) has great potential in enhancing the information channel capacity in both classical and quantum optical communications. Long distance optical communication requires the wavelengths of light are situated in the low-loss communication windows, but most quantum memories currently being developed for use in a quantum repeater work at different wavelengths, so a quantum interface to bridge the wavelength gap is necessary. So far, such an interface for OAM-carried light has not been realized yet. Here, we report the first experimental realization of a quantum interface for a heralded single photon carrying OAM using a nonlinear crystal in an optical cavity. The spatial structures of input and output photons exhibit strong similarity. More importantly, single-photon coherence is preserved during up-conversion as demonstrated.
Project description:Vortices are whirling disturbances, commonly found in nature, ranging from tremendously small scales in Bose-Einstein condensations to cosmologically colossal scales in spiral galaxies. An optical vortex, generally associated with a spiral phase, can carry orbital angular momentum (OAM). The optical OAM can either be in the longitudinal direction if the spiral phase twists in the spatial domain or in the transverse direction if the phase rotates in the spatiotemporal domain. In this article, we demonstrate the intersection of spatiotemporal vortices and spatial vortices in a wave packet. As a result of this intersection, the wave packet hosts a tilted OAM that provides an additional degree of freedom to the applications that harness the OAM of photons.
Project description:Solving the electronic structure problem is a notorious challenge in quantum chemistry and material science. Variational quantum eigensolver (VQE) is a promising hybrid classical-quantum algorithm for finding the lowest-energy configuration of a molecular system. However, it typically requires many qubits and quantum gates with substantial quantum circuit depth to accurately represent the electronic wave function of complex structures. Here, we propose an alternative approach to solve the electronic structure problem using VQE with a single qudit. Our approach exploits a high-dimensional orbital angular momentum state of a heralded single photon and notably reduces the required quantum resources compared to conventional multi-qubit-based VQE. We experimentally demonstrate that our single-qudit-based VQE can efficiently estimate the ground state energy of hydrogen (H2) and lithium hydride (LiH) molecular systems corresponding to two- and four-qubit systems, respectively. We believe that our scheme opens a pathway to perform a large-scale quantum simulation for solving more complex problems in quantum chemistry and material science.
Project description:Due to the nature of infinite dimensionality, the orbital angular momentum (OAM) has been considered as a new degree of freedom of light and widely expanded the scopes of substantial optical applications such as optical telecommunication, quantum information, particle manipulation and imaging. In recent years, the integrated photonic OAM emitters have been actively investigated due to both compactness and tunability. Essentially, the number of available OAM modes by dynamic switching should be large enough so that the dimensionality of OAM could be explored as much as possible. In this work, an integrated photonic emitter with a wide switching range of OAM modes is theoretically developed, numerically simulated, and experimentally verified. The independence of the micro-ring cavity and the scattering unit provides the flexibility to design the device and optimize the performance. Specifically, the dynamic switching of nine OAM modes (l = -4 ~ 4) with azimuthal polarization has been demonstrated by electrically controlled thermo-optic effect.
Project description:Recently, orbital angular momentum (OAM) has been adopted to measure the shape of static objects and the translation motion of moving objects in optical remote sensing. Most of these studies rely on measuring the intensity variation of OAM beams. However, the OAM intensity does not change with the rotation of the spinning object, but its phase changes. The phase variation is proved to be proportional to the object's angular velocity. Since a rotating object will cause the OAM phase dependent on time, the OAM phase needs to be measured instantaneously, to support the OAM-based angular velocity measurement. In this work, we report a scheme to measure the angular velocity of a spinning object using a photonic OAM phase spectrum. A phase-to-intensity strategy is implemented to enable the real-time multi-OAM phase measurement, in which the phase can be determined with the intensities of four focal spots in a two-dimensional array generated by a phase-only spatial light modulator. The experimental results show that the average error of the measured angular velocity could be under 2.45% by detecting the phase of two OAM modes. This OAM-based angular velocity detection method provides a complementary approach to characterize the rotational Doppler effect, especially for slow angular motion.
Project description:Applications that use the orbital angular momentum (OAM) of light show promise for increasing the bandwidth of optical communication networks. However, direct photocurrent detection of different OAM modes has not yet been demonstrated. Most studies of current responses to electromagnetic fields have focused on optical intensity-related effects, but phase information has been lost. In this study, we designed a photodetector based on tungsten ditelluride (WTe2) with carefully fabricated electrode geometries to facilitate direct characterization of the topological charge of OAM of light. This orbital photogalvanic effect, driven by the helical phase gradient, is distinguished by a current winding around the optical beam axis with a magnitude proportional to its quantized OAM mode number. Our study provides a route to develop on-chip detection of optical OAM modes, which can enable the development of next-generation photonic circuits.
Project description:Allowing subwavelength-scale-digitization of optical wavefronts to achieve complete control of light at interfaces, metasurfaces are particularly suited for the realization of planar phase-holograms that promise new applications in high-capacity information technologies. Similarly, the use of orbital angular momentum of light as a new degree of freedom for information processing can further improve the bandwidth of optical communications. However, due to the lack of orbital angular momentum selectivity in the design of conventional holograms, their utilization as an information carrier for holography has never been implemented. Here we demonstrate metasurface orbital angular momentum holography by utilizing strong orbital angular momentum selectivity offered by meta-holograms consisting of GaN nanopillars with discrete spatial frequency distributions. The reported orbital angular momentum-multiplexing allows lensless reconstruction of a range of distinctive orbital angular momentum-dependent holographic images. The results pave the way to the realization of ultrahigh-capacity holographic devices harnessing the previously inaccessible orbital angular momentum multiplexing.
Project description:Mode division multiplexing (MDM) is mooted as a technology to address future bandwidth issues, and has been successfully demonstrated in free space using spatial modes with orbital angular momentum (OAM). To further increase the data transmission rate, more degrees of freedom are required to form a densely packed mode space. Here we move beyond OAM and demonstrate multiplexing and demultiplexing using both the radial and azimuthal degrees of freedom. We achieve this with a holographic approach that allows over 100 modes to be encoded on a single hologram, across a wide wavelength range, in a wavelength independent manner. Our results offer a new tool that will prove useful in realizing higher bit rates for next generation optical networks.
Project description:Computer-generated holograms are crucial for a wide range of applications such as 3D displays, information encryption, data storage, and opto-electronic computing. Orbital angular momentum (OAM), as a new degree of freedom with infinite orthogonal states, has been employed to expand the hologram bandwidth. However, in order to reduce strong multiplexing crosstalk, OAM holography suffers from a fundamental sampling criterion that the image sampling distance should be no less than the diameter of largest addressable OAM mode, which severely hinders the increase in resolution and capacity. Here we establish a comprehensive model on multiplexing crosstalk in OAM holography, propose a pseudo incoherent approach that is almost crosstalk-free, and demonstrate an analogous coherent solution by temporal multiplexing, which dramatically eliminates the crosstalk and largely relaxes the constraint upon sampling condition of OAM holography, exhibiting a remarkable resolution enhancement by several times, far beyond the conventional resolution limit of OAM holography, as well as a large scaling of OAM multiplexing capacity at fixed resolution. Our method enables OAM-multiplexed holographic reconstruction with high quality, high resolution, and high capacity, offering an efficient and practical route towards the future high-performance holographic systems.
Project description:An integrated device, which consists of a variable amplitude splitter and an orbital angular momentum (OAM) emitter, is proposed for the superposition of optical vortex beams. With fixed wavelength and power of incident beam, the OAM of the radiated optical superimposed vortex beam can be dynamically tuned. To verify the operating principle, the proposed device has been fabricated on the SOI substrate and experimentally measured. The experimental results confirm the tunability of superimposed vortex beams. Moreover, the ability of independently varying the OAM flux and the geometric distribution of intensity is illustrated and discussed with numerical simulation. We believe that this work would be promising in various applications.