Synthesis and Tribological Studies of Branched Alcohol Derived Epoxidized Biodiesel.
Ontology highlight
ABSTRACT:
SUBMITTER: Ren Q
PROVIDER: S-EPMC5455368 | biostudies-other | 2015 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Reaction of triglycerides with trimethyl orthoformate in presence of camphorsulfonic acid (CSA) gave the fatty acid methyl esters (FAMEs, 4) in good yield. However, under these conditions, the protected glycerol could not be obtained. Formation of orthoesters 9 was possible in a separate reaction using very weak acidic conditions, namely catalytic amounts of pyridinium para-toluenesulfonate (PPTS). Subjecting the orthoesters 9 to thermolysis at 270 °C gave allyl alcohol (11) with good efficiency.
| S-EPMC9064318 | biostudies-literature
Project description:BackgroundThe steadily increasing demand for diesel fuels calls for renewable energy sources. This has attracted a growing amount of research to develop advanced, alternative biodiesel worldwide. Several major disadvantages of current biodiesels are the undesirable physical properties such as high viscosity and poor low-temperature operability. Therefore, there is an urgent need to develop novel and advanced biodiesels.ResultsInspired by the proven capability of wax ester synthase/acyl-coenzyme A, diacylglycerol acyltransferase (WS/DGAT) to generate fatty acid esters, de novo biosynthesis of fatty acid branched-chain esters (FABCEs) and branched fatty acid branched-chain esters (BFABCEs) was performed in engineered Escherichia coli through combination of the (branched) fatty acid biosynthetic pathway and the branched-chain amino acid biosynthetic pathway. Furthermore, by modifying the fatty acid pathway, we improved FABCE production to 273 mg/L and achieved a high proportion of FABCEs at 99.3 % of total fatty acid esters. In order to investigate the universality of this strategy, Pichia pastoris yeast was engineered and produced desirable levels of FABCEs for the first time with a good starting point of 169 mg/L.ConclusionsWe propose new pathways of fatty acid ester biosynthesis and establish proof of concept through metabolic engineering of E. coli and P. pastoris yeast. We were able to produce advanced biodiesels with high proportions FABCEs and BFABCEs. Furthermore, this new strategy promises to achieve advanced biodiesels with beneficial low-temperature properties.
| S-EPMC4483204 | biostudies-literature
Project description:Ceramic materials possessing the properties of high-strength and rigidity are widely used in industry. The shell nacre has a layered structure containing both macroscopic and microscopic levels and is equipped with superior qualities regarding hardness and strength. Therefore, the ceramic composites with a nacre-like layered structure have the potential to be utilized as sliding bearings employed in the harsh conditions of wells. For the purpose of this paper, a porous Al?O? ceramics skeleton with nanometer powder is prepared using the freeze-casting method. Then the porous ceramic skeleton is filled with polymer polymethyl methacrylate (PMMA) through mass polymerization to produce a bionic Al?O?/PMMA composite with a lamellar structure. The properties of the prepared composite are determined by the analysis of micro-hardness, fracture toughness, friction coefficient, wear scar diameter, and the morphology of the worn surface. Consequent results indicate that elevation in the A1?O? powder, which acts as the initial solid phase content, prompts the ceramic slurry to exhibit an increase in viscosity and a gradual decrease in the pore size of the ceramic skeleton. The prepared layered Al?O?/PMMA composite possesses high fracture toughness, which closely resembles that of Al, is approximately four times that of the matrix of the Al?O? ceramics and 16 times that of the PMMA. Three kinds of composites containing different solid phase content are subjected to testing involving lubrication by water-based drilling fluid to determine the friction coefficient of each. The results indicate that an increased load leads to a decreased friction coefficient while the impact of speed is not evident. Under dry conditions, the friction coefficient of three different composites tested, declines with elevated load and speed. With the use of water-based drilling fluid as lubrication, the wear scar diameter increases at higher speed, while dry conditions denote increased load. Abrasive wear is determined to be the principal form of erosion of layered Al?O?/PMMA composites.
| S-EPMC6163941 | biostudies-literature
Project description:Nanodiamonds (ND) present a unique combination of desirable mechanical, functional, and chemical characteristics that are ideally suited for reinforcing and enhancing the wear resistance of carbide based materials. Tungsten carbide cobalt (WC-Co) matrix nanocomposites reinforced with varying amounts of ND (2 - 10 vol.%) were synthesized here by spark plasma sintering. The rapid thermal consolidation route enabled attainment of dense samples with a significant retention of the metastable diamond phase. NDs affected the microstructural evolution, chemistry, and mechanical properties of WC-Co. Macroscale reciprocating pin-on-disk tests were conducted to assess wear behavior under conditions relevant to service environments, e.g., high cycles and high contact pressure. Microscale tribological properties were assessed using microscratch tests in order to investigate the intrinsic effects of ND on the localized mechanical and tribological response of WC-Co-ND composites. The incorporation of 10 vol.% ND enhanced wear resistance at both the micro- and macroscale, by 28% and 35%, respectively.
| S-EPMC5539160 | biostudies-literature
Project description:Recently, researchers have been committed to boosting the environmental friendliness and functional performance of multifunctional additives. In this study, an eco-friendly methylbenzotriazole-amide derivative (MeBz-2-C18) was designed and synthesized, with ethylamine serving as the linkage between methylbenzotriazole and the oleoyl chain. The structure of MeBz-2-C18 was characterized by nuclear magnetic resonance (NMR), high-resolution mass spectrometry (HR-MS), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). Subsequently, the storage stability and tribological behavior of MeBz-2-C18 and the commercial benzotriazole oleamide salt (T406) were comparatively evaluated. The covalently-bonded MeBz-2-C18 exhibits superior thermal stability, along with boosted storage stability and tribological performance in the synthetic base oil. Specifically, 0.5 wt.% addition of MeBz-2-C18 and T406 can reduce the average wear scar diameter (ave. WSD) by 21.6% and 13.9%, respectively. To further explore the micro-mechanism, the electrostatic potential (ESP) and worn surfaces were analyzed with scanning electron microscope-energy dispersive spectrometer (SEM-EDS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. The results show that MeBz-2-C18 possesses stronger adsorption on the metal surface, and its amide bond preferentially breaks during friction. This reduces the interfacial shear force and promotes the film formation of iron oxides, thus resulting in superior tribological performance.
| S-EPMC11818913 | biostudies-literature
Project description:Alpha-branched amides are prepared by multicomponent reactions in which nitriles undergo hydrozirconation to form metalloimines that react with acyl chlorides. The resulting acylimines react with a variety of pi-nucleophiles in the presence of Lewis acids to form the desired amides.
| S-EPMC2665885 | biostudies-literature
Project description:The low cost lipase derived from Thermomyces lanugionous was chosen to conjugate with Fe3O4 nanoparitcles as a magnetic responsive lipase (MRL) biocatalyst. The structure of MRL was observed by atomic force microscopy (AFM). The Fourier transform infrared (FTIR) spectroscopy analysis confirmed the lipase conjugated to Fe3O4 nanoparticles. Optimized conditions for the process of biodiesel production by MRL were investigated by the response surface methodology (RSM) and the Box-Behnken design (BBD). The optimized conditions for biodiesel production by MRL were as follows. The molar ratio of methanol to oil was 4.0, water content was 1.5 % as oil weight, the dosage of MRL to oil was 9.0 % (W/W) under 41 °C for 28 h. Under the optimized conditions, the yield of FAMEs by MRL reached 82.20 %. Further experiments showed that the MRL could be used 10 cycles and the yield of FAMEs decreased slightly by 10.97 %. These results indicated that Fe3O4 nanoparticle carrier could efficiently improve the FAMEs synthesis and enhance the MRL stabilization and reusability in the biodiesel production.
| S-EPMC7245248 | biostudies-literature
Project description:Sulfonation of graphitic carbon nitride (g-CN) affords a polar and strongly acidic catalyst, Sg-CN, which displays unprecedented reactivity and selectivity in biodiesel synthesis and esterification reactions at room temperature.
| S-EPMC5172360 | biostudies-literature
Project description:(E)-4-Hydroxy-3-methyl-but-2-enyl diphosphate (HMBPP) and its phosphonate analogs are potent phosphoantigens. HMBPP contains an (E)-allylic alcohol which interacts with the molecular target BTN3A1 giving an antigenic signal to activate Vγ9Vδ2 T cells. As probes of BTN3A1 function, we prepared prodrug derivatives of the HMBPP analog C-HMBP that lack the (E)-allylic alcohol or have modified it to an aldehyde or aldoxime and evaluated their biological activity. Removal of the alcohol completely abrogates phosphoantigenicity in these compounds while the aldoxime modification decreases potency relative to the (E)-allylic alcohol form. However, homoprenyl derivatives oxidized to an aldehyde stimulate Vγ9Vδ2 T cells at nanomolar concentrations. Selection of phosphonate protecting groups (i.e., prodrug forms) impacts the potency of phosphoantigen aldehydes, with mixed aryl acyloxyalkyl forms exhibiting superior activity relative to aryl amidate forms. The activity correlates with the cellular reduction of the aldehyde to the alcohol form. Thus, the functionality on this ligand framework can be altered concurrently with phosphonate protection to promote cellular transformation to highly potent phosphoantigens.
| S-EPMC7812676 | biostudies-literature
Project description:Experimental and theoretical considerations for kinetic modeling of the transesterification reaction of microalgae lipids into biodiesel were investigated using Lewis acid deep eutectic solvents (DESs) as a catalyst. The acid sites involved in the reaction were characterized using acetonitrile as a probe to understand the mechanism. DES ChCl-SnCl2 (choline chloride-tin ii chloride) showed higher catalytic activity in transesterification due to its higher acidity compared to DES ChCl-ZnCl2 (choline chloride-zinc chloride). This was illustrated by geometric optimization of the DES structures through density functional theory (DFT) which showed that the metal centers furthest from the choline moiety are the most acidic and the bond lengths of Sn-Cl were between 2.56 and 2.77 Å, and were greater than the Zn-Cl bond lengths from 2.30 to 2.48 Å, making the ChCl-SnCl2 DES more acidic and more suitable for the biodiesel production. The fatty acid methyl ester (FAME) conversion from microalgae lipid was 36.75 mg g-1 under ideal conditions (6 molar ratio methanol-lipid with 8 vol% DES dosage in methanol at 140 °C for 420 min). The activation energy is found to be 36.3 kJ mol-1 based on the pseudo-first-order reaction, in addition, the DES catalyst (ChCl-SnCl2) drove the reaction chemically and did not show mass transfer limitation. Information from this study can help to advance the development of an efficient and environmentally friendly industrial biodiesel production technology.
| S-EPMC10054363 | biostudies-literature