Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure and Transport Properties of Dense Polycrystalline Clathrate-II (K,Ba)16(Ga,Sn)136 Synthesized by a New Approach Employing SPS.

ABSTRACT: Tin clathrate-II framework-substituted compositions are of current interest as potential thermoelectric materials for medium-temperature applications. A review of the literature reveals different compositions reported with varying physical properties, which depend strongly on the exact composition as well as the processing conditions. We therefore initiated an approach whereby single crystals of two different (K,Ba)16(Ga,Sn)136 compositions were first obtained, followed by grinding of the crystals into fine powder for low temperature spark plasma sintering consolidation into dense polycrystalline solids and subsequent high temperature transport measurements. Powder X-ray refinement results indicate that the hexakaidecahedra are empty, K and Ba occupying only the decahedra. Their electrical properties depend on composition and have very low thermal conductivities. The structural and transport properties of these materials are compared to that of other Sn clathrate-II compositions.

SUBMITTER: Wei K

PROVIDER: S-EPMC5457072 | biostudies-other | 2016 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Shared Molecules

Only show the datasets with similarity scores above: 0.5

Threshold

0.5

Similar Datasets

Structural and Electrochemical Properties of Type VIII Ba8Ga16-δSn30+δ Clathrate (δ ≈ 1) during Lithiation.

Project description:Clathrates of the tetrel (Tt = Si, Ge, Sn) elements are host-guest structures that can undergo Li alloying reactions with high capacities. However, little is known about how the cage structure affects the phase transformations that take place during lithiation. To further this understanding, the structural changes of the type VIII clathrate Ba8Ga16-δSn30+δ (δ ≈ 1) during lithiation are investigated and compared to those in β-Sn with ex situ X-ray total scattering measurements and pair distribution function (PDF) analysis. The results show that the type VIII clathrate undergoes an alloying reaction to form Li-rich amorphous phases (LixBa0.17Ga0.33Sn0.67, x = 2-3) with local structures similar to those in the crystalline binary Li-Sn phases that form during the lithiation of β-Sn. As a result of the amorphous phase transition, the type VIII clathrate reacts at a lower voltage (0.25 V vs Li/Li+) compared to β-Sn (0.45 V) and goes through a solid-solution reaction after the initial conversion of the crystalline clathrate phase. Cycling experiments suggest that the amorphous phase persists after the first lithiation and results in considerably better cycling than in β-Sn. Density functional theory (DFT) calculations suggest that topotactic Li insertion into the clathrate lattice is not favorable due to the high energy of the Li sites, which is consistent with the experimentally observed amorphous phase transformation. The local structure in the clathrate featuring Ba atoms surrounded by a cage of Ga and Sn atoms is hypothesized to kinetically circumvent the formation of Li-Sn or Li-Ga crystalline phases, which results in better cycling and a lower reaction voltage. Based on the improved electrochemical performance, clathrates could act as tunable precursors to form amorphous Li alloying phases with novel electrochemical properties.

| S-EPMC8447186 | biostudies-literature

Na-Ga-Si type-I clathrate single crystals grown via Na evaporation using Na-Ga and Na-Ga-Sn fluxes.

Project description:Single crystals of a Na-Ga-Si clathrate, Na8Ga5.70Si40.30, of size 2.9 mm were grown via the evaporation of Na from a Na-Ga-Si melt with the molar ratio of Na : Ga : Si = 4 : 1 : 2 at 773 K for 21 h under an Ar atmosphere. The crystal structure was analyzed using X-ray diffraction with the model of the type-I clathrate (cubic, a = 10.3266(2) Å, space group Pm3̄n, no. 223). By adding Sn to a Na-Ga-Si melt (Na : Ga : Si : Sn = 6 : 1 : 2 : 1), single crystals of Na8Ga x Si46-x (x = 4.94-5.52, a = 10.3020(2)-10.3210(3) Å), with the maximum size of 3.7 mm, were obtained via Na evaporation at 723-873 K. The electrical resistivities of Na8Ga5.70Si40.30 and Na8Ga4.94Si41.06 were 1.40 and 0.72 mΩ cm, respectively, at 300 K, and metallic temperature dependences of the resistivities were observed. In the Si L2,3 soft X-ray emission spectrum of Na8Ga5.70Si40.30, a weak peak originating from the lowest conduction band in the undoped Si46 was observed at an emission energy of 98 eV.

| S-EPMC9091382 | biostudies-literature

Investigating the Chemical Ordering in Quaternary Clathrate Ba8AlxGa16-xGe30.

Project description:Recently, there has been an increased interest in quaternary clathrate systems as promising thermoelectric materials. Because of their increased complexity, however, the chemical ordering in the host framework of quaternary clathrates has not yet been comprehensively analyzed. Here, we have synthesized a prototypical quaternary type-I clathrate Ba8AlxGa16-xGe30 by Czochralski and flux methods, and we employed a combination of X-ray and neutron diffraction along with atomic scale simulations to investigate chemical ordering in this material. We show that the site occupancy factors of trivalent elements at the 6c site differ, depending on the synthesis method, which can be attributed to the level of equilibration. The flux-grown samples are consistent with the simulated high-temperature disordered configuration, while the degree of ordering for the Czochralski sample lies between the ground state and the high-temperature state. Moreover, we demonstrate that the atomic displacement parameters of the Ba atoms in the larger tetrakaidecahedral cages are related to chemical ordering. Specifically, Ba atoms are either displaced toward the periphery or localized at the cage centers. Consequently, this study reveals key relationships between the chemical ordering in the quaternary clathrates Ba8AlxGa16-xGe30 and the structural properties, thereby offering new perspectives on designing these materials and optimizing their thermoelectric properties.

| S-EPMC8596372 | biostudies-literature

Creep of Polycrystalline Magnesium Aluminate Spinel Studied by an SPS Apparatus.

Project description:A spark plasma sintering (SPS) apparatus was used for the first time as an analytical testing tool for studying creep in ceramics at elevated temperatures. Compression creep experiments on a fine-grained (250 nm) polycrystalline magnesium aluminate spinel were successfully performed in the 1100-1200 °C temperature range, under an applied stress of 120-200 MPa. It was found that the stress exponent and activation energy depended on temperature and applied stress, respectively. The deformed samples were characterized by high resolution scanning electron microscope (HRSEM) and high resolution transmission electron microscope (HRTEM). The results indicate that the creep mechanism was related to grain boundary sliding, accommodated by dislocation slip and climb. The experimental results, extrapolated to higher temperatures and lower stresses, were in good agreement with data reported in the literature.

| S-EPMC5456765 | biostudies-other

High Pressure Properties of a Ba-Cu-Zn-P Clathrate-I.

Project description:The high pressure properties of the novel tetrel-free clathrate, Ba₈Cu13.1Zn3.3P29.6, were investigated using synchrotron powder X-ray diffraction. The pressure was applied using a diamond anvil cell. No structural transitions or decomposition were detected in the studied pressure range of 0.1-7 GPa. The calculated bulk modulus for Ba₈Cu13.1Zn3.3P29.6 using a third-order Birch-Murnaghan equation of state is 65(6) GPa at 300 K. This bulk modulus is comparable to the bulk moduli of Ge- and Sn-based clathrates, like A₈Ga16Ge30 (A = Sr, Ba) and Sn19.3Cu4.7P22I₈, but lower than those for the transition metal-containing silicon-based clathrates, Ba₈TxSi46-x, T = Ni, Cu; 3 ≤ x ≤ 5.

| S-EPMC5512514 | biostudies-other

Controlling superstructural ordering in the clathrate-I Ba8M16P30 (M = Cu, Zn) through the formation of metal-metal bonds.

Project description:Order-disorder-order phase transitions in the clathrate-I Ba8Cu16P30 were induced and controlled by aliovalent substitutions of Zn into the framework. Unaltered Ba8Cu16P30 crystallizes in an ordered orthorhombic (Pbcn) clathrate-I superstructure that maintains complete segregation of metal and phosphorus atoms over 23 different crystallographic positions in the clathrate framework. The driving force for the formation of this Pbcn superstructure is the avoidance of Cu-Cu bonds. This superstructure is preserved upon aliovalent substitution of Zn for Cu in Ba8Cu16-x Zn x P30 with 0 < x < 1.6 (10% Zn/Mtotal), but vanishes at greater substitution concentrations. Higher Zn concentrations (up to 35% Zn/Mtotal) resulted in the additional substitution of Zn for P in Ba8M16+y P30-y (M = Cu, Zn) with 0 ≤ y ≤ 1. This causes the formation of Cu-Zn bonds in the framework, leading to a collapse of the orthorhombic superstructure into the more common cubic subcell of clathrate-I (Pm3n). In the resulting cubic phases, each clathrate framework position is jointly occupied by three different elements: Cu, Zn, and P. Detailed structural characterization of the Ba-Cu-Zn-P clathrates-I via single crystal X-ray diffraction, joint synchrotron X-ray and neutron powder diffractions, pair distribution function analysis, electron diffraction and high-resolution electron microscopy, along with elemental analysis, indicates that local ordering is present in the cubic clathrate framework, suggesting the evolution of Cu-Zn bonds. For the compounds with the highest Zn content, a disorder-order transformation is detected due to the formation of another superstructure with trigonal symmetry and Cu-Zn bonds in the clathrate-I framework. It is shown that small changes in the composition, synthesis, and crystal structure have significant impacts on the structural and transport properties of Zn-substituted Ba8Cu16P30.

| S-EPMC5437377 | biostudies-literature

Pure &crystallized 2D Boron Nitride sheets synthesized via a novel process coupling both PDCs and SPS methods.

Project description:Within the context of emergent researches linked to graphene, it is well known that h-BN nanosheets (BNNSs), also referred as 2D BN, are considered as the best candidate for replacing SiO2 as dielectric support or capping layers for graphene. As a consequence, the development of a novel alternative source for highly crystallized h-BN crystals, suitable for a further exfoliation, is a prime scientific issue. This paper proposes a promising approach to synthesize pure and well-crystallized h-BN flakes, which can be easily exfoliated into BNNSs. This new accessible production process represents a relevant alternative source of supply in response to the increasing need of high quality BNNSs. The synthesis strategy to prepare pure h-BN is based on a unique combination of the Polymer Derived Ceramics (PDCs) route with the Spark Plasma Sintering (SPS) process. Through a multi-scale chemical and structural investigation, it is clearly shown that obtained flakes are large (up to 30 μm), defect-free and well crystallized, which are key-characteristics for a subsequent exfoliation into relevant BNNSs.

| S-EPMC4740893 | biostudies-literature

MA,TI,KA,GA,PA,BA

Project description:MA,TI,KA,GA,PA,BA Raw sequence reads

| PRJNA993464 | ENA

Hydro-thermally synthesized α-Ba(2)P(2)O(7).

Project description:Single crystals of α-Ba(2)P(2)O(7), dibarium diphosphate, were obtained under hydro-thermal conditions. The structure belongs to the diphosphate A(2)P(2)O(7) series with A being an alkaline earth cation. α-Ba(2)P(2)O(7) crystallizes isotypically with α-Sr(2)P(2)O(7). All atomic sites have site symmetry m with the exception of two O atoms which reside on general positions. Both Ba(2+) cations are coordinated by nine terminal O atoms from eclipsed diphosphate P(2)O(7) anions to form a three-dimensional network throughout the structure.

| S-EPMC3011656 | biostudies-literature

Crystallographic Characterization on Polycrystalline Ni-Mn-Ga Alloys with Strong Preferred Orientation.

Project description:Heusler type Ni-Mn-Ga ferromagnetic shape memory alloys can demonstrate excellent magnetic shape memory effect in single crystals. However, such effect in polycrystalline alloys is greatly weakened due to the random distribution of crystallographic orientation. Microstructure optimization and texture control are of great significance and challenge to improve the functional behaviors of polycrystalline alloys. In this paper, we summarize our recent progress on the microstructure control in polycrystalline Ni-Mn-Ga alloys in the form of bulk alloys, melt-spun ribbons and thin films, based on the detailed crystallographic characterizations through neutron diffraction, X-ray diffraction and electron backscatter diffraction. The presented results are expected to offer some guidelines for the microstructure modification and functional performance control of ferromagnetic shape memory alloys.

| S-EPMC5459090 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data