Oxygen-free Layer-by-Layer Assembly of Lithiated Composites on Graphene for Advanced Hydrogen Storage.
Ontology highlight
ABSTRACT:
SUBMITTER: Xia G
PROVIDER: S-EPMC5604367 | BioStudies | 2017-01-01T00:00:00Z
REPOSITORIES: biostudies
Similar Datasets
Project description:Hydrogenation of a lithium-potassium (double-cation) amide (LiK(NH₂)₂), which is generated as a product by ammonolysis of litium hydride and potassium hydride (LiH-KH) composite, is investigated in details. As a result, lithium amide (LiNH₂) and KH are generated after hydrogenation at 160 °C as an intermediate. It is noteworthy that the mixture of LiH and KNH₂ has a much lower melting point than that of the individual melting points of LiNH₂ and KH, which is recognized as a eutectic phenomenon. The hydrogenation temperature of LiNH₂ in the mixture is found to be significantly lower than that of LiNH₂ itself. This improvement of reactivity must be due to kinetic modification, induced by the enhanced atomic mobility due to the eutectic interaction.
2019-01-01 | S-EPMC6479683 | BioStudies
Project description:Li-ion batteries dominate portable energy storage due to their exceptional power and energy characteristics. Yet, various consumer devices and electric vehicles demand higher specific energy and power with longer cycle life. Here we report a full-cell battery that contains a lithiated Si/graphene anode paired with a selenium disulfide (SeS2) cathode with high capacity and long-term stability. Selenium, which dissolves from the SeS2 cathode, was found to become a component of the anode solid electrolyte interphase (SEI), leading to a significant increase of the SEI conductivity and stability. Moreover, the replacement of lithium metal anode impedes unwanted side reactions between the dissolved intermediate products from the SeS2 cathode and lithium metal and eliminates lithium dendrite formation. As a result, the capacity retention of the lithiated silicon/graphene-SeS2 full cell is 81% after 1,500 cycles at 268?mA?gSeS2-1. The achieved cathode capacity is 403?mAh?gSeS2-1 (1,209?mAh?cmSeS2-3).
1000-01-01 | S-EPMC5227063 | BioStudies
Project description:Hydrogenation of iron nanoparticles was performed both computationally and experimentally where previously chemically-bonded iron hydride is considered to be unachievable under ordinary conditions. Density functional theory (DFT) calculations predict that hydrogenated iron nanoparticles are stabilized on a single-layer graphene/Cu substrate. Experimentally, iron nanoparticles were deposited onto a graphene/Cu substrate by vacuum deposition. Hydrogenation was done at 1atm of hydrogen gas and under liquid nitrogen. Mass spectrometry peak confirmed the hydrogen release from hydrogenated iron nanoparticles while a scanning transmission electron microscopy is used in order to link a geometrical shape of iron hydride nanoparticles between experimental and theoretical treatments. The hydrogenated iron nanoparticles were successfully synthesized where hydrogenated iron nanoparticles are stable under ordinary conditions.
2014-01-01 | S-EPMC3978499 | BioStudies
Project description:Boron nitride nanosheets (BNNS) hold the similar two-dimensional structure as graphene and unique properties complementary to graphene, which makes it attractive in application ranging from electronics to energy storage. The exfoliation of boron nitride (BN) still remains challenge and hinders the applications of BNNS. In this work, the preparation of BNNS has been realized by a shear-assisted supercritical CO2 exfoliation process, during which supercritical CO2 intercalates and diffuses between boron nitride layers, and then the exfoliation of BN layers is obtained in the rapid depressurization process by overcoming the van der Waals forces. Our results indicate that the bulk boron nitride has been successfully exfoliated into thin nanosheets with an average 6 layers. It is found that the produced BNNS is well-dispersed in isopropyl alcohol (IPA) with a higher extinction coefficient compared with the bulk BN. Moreover, the BNNS/epoxy composite used as thermal interface materials has been prepared. The introduction of BNNS results in a 313% enhancement in thermal conductivity. Our results demonstrate that BNNS produced by supercritical CO2 exfoliation show great potential applications for heat dissipation of high efficiency electronics.
1000-01-01 | S-EPMC5736726 | BioStudies
Project description:Two-dimensional (2D) metal dichalcogenides have attracted considerable attention for use in photoelectric devices due to their unique layer structure and strong light-matter interaction. In this paper, vertically grown SnS<sub>2</sub> nanosheets array film was synthesized by a facile chemical bath deposition (CBD). The effects of deposition time and annealing temperature on the quality of SnS<sub>2</sub> films was investigated in detail. By optimizing the preparation conditions, the SnS<sub>2</sub> array film exhibited efficient photoelectric detection performance under sunlight. Furthermore, in order to improve the performance of the photodetector based on SnS<sub>2</sub> nanosheets film, a transparent graphene film was introduced as the hole-transport layer by wet-chemical method directly transferring techniques. Graphene/SnS<sub>2</sub> nanosheets array film heterojunction photodetectors exhibit enhanced photoresponsivity. The light on/off ratio of the photodetector based on graphene/SnS<sub>2</sub> was 1.53, about 1.4 times higher than that of the pristine SnS<sub>2</sub> array films. The improved photoresponse performance suggested that the effective heterojunction between vertical SnS<sub>2</sub> nanosheets array film and graphene suppresses the recombination of photogenerated carriers. The results indicate that the graphene/SnS<sub>2</sub> heterojunction photodetectors have great potential in photodetection devices.
2019-01-01 | S-EPMC6723453 | BioStudies
Project description:Mechanical degradation and resultant capacity fade in high-capacity electrode materials critically hinder their use in high-performance rechargeable batteries. Despite tremendous efforts devoted to the study of the electro-chemo-mechanical behaviours of high-capacity electrode materials, their fracture properties and mechanisms remain largely unknown. Here we report a nanomechanical study on the damage tolerance of electrochemically lithiated silicon. Our in situ transmission electron microscopy experiments reveal a striking contrast of brittle fracture in pristine silicon versus ductile tensile deformation in fully lithiated silicon. Quantitative fracture toughness measurements by nanoindentation show a rapid brittle-to-ductile transition of fracture as the lithium-to-silicon molar ratio is increased to above 1.5. Molecular dynamics simulations elucidate the mechanistic underpinnings of the brittle-to-ductile transition governed by atomic bonding and lithiation-induced toughening. Our results reveal the high damage tolerance in amorphous lithium-rich silicon alloys and have important implications for the development of durable rechargeable batteries.
2015-01-01 | S-EPMC4598720 | BioStudies
Project description:Preparatively useful conjugate addition of lithiated methyl pyridines to cyclic and acyclic enones is reported. Addition of 2-picoline to 3-penten-2-one led to a concise synthesis of the alkaloids (+/-)-senepodine G and (+/-)-cermizine C.
2010-01-01 | S-EPMC2921646 | BioStudies
Project description:Metal oxides and carbonaceous composites are both promising materials for electrochemical energy conversion and storage devices, such as secondary rechargeable batteries, fuel cells and electrochemical capacitors. In this study, Fe3O4 nanoparticles wrapped in nitrogen-doped (N-doped) graphene nanosheets (Fe3O4@G) were fabricated by a facile one-step carbothermal reduction method derived from Fe2O3 and liquid-polyacrylonitrile (LPAN). The unique two-dimensional structure of N-doped graphene nanosheets, can not only accommodate the volume changes during lithium intercalation/extraction processes and suppress the particles aggregation but also act as an electronically conductive matrix to improve the electrochemical performance of Fe3O4 anode, especially the rate capability. What's more, by etching Fe3O4@G to remove the iron-based oxide template, porous N-doped graphene composites (NGCs) were prepared and presented abundant pore structure with high specific surface area, delivering a specific capacitance of 172 F·g-1 at 0.5 A·g-1. In this way, Fe2O3 was both template and activator to adjust the pore size of graphene. And the effect of specific surface area and pore size tuned by the Fe2O3 activator were also revealed.
2018-01-01 | S-EPMC6204351 | BioStudies
Project description:Electrode materials are crucial for the electrochemical performance of supercapacitors. In view of the high specific surface area, high conductivity of graphene nanosheets and the high pseudocapacitance of polyaniline (PANI), the combination of graphene with PANI has become a research hotspot. In this work, we summarize the recent advance on the synthesis of PANI and graphene/PANI composites, and their application in supercapacitors. The synthesis of PANI is the basis of preparing graphene/PANI composites, so we first introduce the synthesis methods of PANI. Then, the advances of two dimensional (2D) and three dimensional (3D) graphene/PANI composites are summarized according to the inherent feature of graphene. The 2D composites of pristine graphene and functionalized graphene with PANI are introduced separately; furthermore, the 3D composites are classified into three sections, including flexible graphene/PANI composites, graphene framework based composites, and printable graphene/PANI composites. At last, aiming at solving the current challenges of graphene/PANI composites, we put forward some strategies for preparing high performance graphene/PANI composite electrodes.
2019-01-01 | S-EPMC6540261 | BioStudies
Project description:Nanostructured surface possessing ultrahigh adhesion like "gecko foot" or "rose petal" can offer more opportunities for bionic application. We grow flower-like few-layer graphene on silicon nanocone arrays to form graphene nanoclusters, showing robust adhesion. Their contact angle (CA) is 164° with a hysteresis CA of 155° and adhesive force for a 5 μL water droplet is about 254 μN that is far larger than present reported results. We bring experimental evidences that this great adhesion depends on large-area plentiful edges of graphene nanosheets tuned by conical nanostructure and intrinsic wetting features of graphene. Such new hierarchical few-layer graphene nanostructure provides a feasible strategy to understand the ultra-adhesive mechanism of the "gecko effect" or "rose effect" and enhance the wettability of graphene for many practical applications.
2012-01-01 | S-EPMC3397321 | BioStudies