Transcriptomics analysis of gene expression in wildtype and NSUN2 knockdown T24 cell
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE133621 | GEO | 2019/07/02
REPOSITORIES: GEO
Similar Datasets
Project description:36 cases of UCB and 29 adjacent normal bladder tissues (22 pairs) were derived from patients diagnosed with UCB and received radial cystectomy at Sun Yat-sen University Cancer Center (SYSUCC, Guangzhou, China). Total RNA was isolated using TRIzol® Reagent (Ambion). The RNA concentration and quality were determined with NanoDrop, Qubit and agarose gel analysis. The Dynabeads® mRNA Purification Kit (Ambion) was used to enrich the mRNAs, which were used as templates for RNA-Seq library construction. RNA-Seq libraries was directly constructed by using KAPA mRNA Stranded mRNA-Seq Kit (KAPA) according to the manufacturer’s instructions. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length. The different genes expression between the UCB and adjacent normal tissues were detected. Several genes related to cancer pathways were dysregulated.
2019-07-02 | GSE133624 | GEO
Project description:Total RNA was isolated from mouse lung harvested at different stages using TRIzol® Reagent (Ambion). mRNA was extracted with using Dynabeads® mRNA Purification Kit (Ambion) and subjected to TURBO™ DNase (Invitrogen) treatment at 37°C for 30 min and ethanol precipitation. Thus purified mRNA was used for RNA-Seq library construction. Libraries were directly constructed using the KAPA Stranded mRNA-Seq Kit (KAPA) and were sequenced using HiSeq2500 (Illumina) in paired-read mode, creating reads with a length of 125 bp.
2019-10-24 | GSE122492 | GEO
Project description:36 cases of UCB and 29 adjacent normal bladder tissues (22 pairs) were derived from patients diagnosed with UCB and received radial cystectomy at Sun Yat-sen University Cancer Center (SYSUCC, Guangzhou, China).Total RNA was isolated using TRIzol® Reagent (Ambion). The RNA concentration and quality were determined with NanoDrop, Qubit and agarose gel analysis. The Dynabeads® mRNA Purification Kit (Ambion) was used to enrich the mRNAs, which were used as templates for RNA-BisSeq library construction. For RNA-BisSeq, bisulfite-treated mRNAs were first subjected to reverse transcription with ACT hexamers and Superscript II Reverse Transcriptase (Invitrogen), and the following processes were carried out with KAPA mRNA Stranded mRNA-Seq Kit (KAPA) according to the manufacturer’s instructions. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length. The m5C sites were called using meRanCall from meRanTK (FDR < 0.01). The differential m5C sites were detected and the hypermethylated m5C in UCB samples correlates with oncogene mRNA overexpression in UCBs.
2019-07-02 | GSE133622 | GEO
Project description:Total RNA was isolated from mouse lung harvested at different stages using TRIzol® Reagent (Ambion). mRNA was extracted with using Dynabeads® mRNA Purification Kit (Ambion) and subjected to TURBO™ DNase (Invitrogen) treatment at 37°C for 30 min and ethanol precipitation. Thus purified mRNA was used for RNA-BisSeq library construction. Around 200 ng mRNA premixed with the in vitro transcribed Dhfr mRNA at a ratio of 300:1 (Dhfr mRNA serves as methylation conversion control) was fragmented to ~100-nt fragments for 1 min at 90°C in 10× RNA Fragmentation Reagent (Ambion), then stopped by 10× RNA stop solution (Ambion), and precipitated with 100% ethanol. The RNA pellet was resuspended in 100 µl bisulfite solution (pH 5.1), which is a 100:1 mixture of 40% sodium bisulfite (Sigma) and 600 µM hydroquinone (Sigma) and subjected to heat incubation at 75°C for 4.5 h. The reaction mixture was desalted by passing through Nanosep with 3K Omega 500/pk columns (PALL Corporation) with centrifugation. After washed with nuclease-free water and centrifuged for five times, the RNA was finally disolved in 75 μl nuclease-free water and then desulfonated by incubation with an equal volume of 1 M Tris-HCl (pH 9.0) at 75 °C for 1 h. After ethanol precipitation, the RNA was resuspended in 11 µl of RNase-free water and subjected to library construction. Reverse transcription was carried out with superscript II Reverse Transcriptase (Invitrogen) and ACT random hexamers. The following procedures were performed with the KAPA Stranded mRNA-Seq Kit (KAPA) according to the manufacturer’s instructions.Libraries were sequenced using HiSeq2500 (Illumina) in paired-read mode, creating reads with a length of 125 bp.
2019-10-24 | GSE122491 | GEO
Project description:Total RNA was isolated from zebrafish embryos harvested at different stages using TRIzol® Reagent (Ambion). mRNA was extracted with using Dynabeads® mRNA Purification Kit (Ambion) and subjected to TURBO™ DNase (Invitrogen) treatment at 37°C for 30 min and ethanol precipitation. Thus purified mRNA was used for RNA-BisSeq library construction. Around 200 ng mRNA premixed with the in vitro transcribed Dhfr mRNA at a ratio of 300:1 (Dhfr mRNA serves as methylation conversion control) was fragmented to ~100-nt fragments for 1 min at 90°C in 10× RNA Fragmentation Reagent (Ambion), then stopped by 10× RNA stop solution (Ambion), and precipitated with 100% ethanol. The RNA pellet was resuspended in 100 µl bisulfite solution (pH 5.1), which is a 100:1 mixture of 40% sodium bisulfite (Sigma) and 600 µM hydroquinone (Sigma) and subjected to heat incubation at 75°C for 4.5 h. The reaction mixture was desalted by passing through Nanosep with 3K Omega 500/pk columns (PALL Corporation) with centrifugation. After washed with nuclease-free water and centrifuged for five times, the RNA was finally disolved in 75 μl nuclease-free water and then desulfonated by incubation with an equal volume of 1 M Tris-HCl (pH 9.0) at 75 °C for 1 h. After ethanol precipitation, the RNA was resuspended in 11 µl of RNase-free water and subjected to library construction. Reverse transcription was carried out with superscript II Reverse Transcriptase (Invitrogen) and ACT random hexamers. The following procedures were performed with the KAPA Stranded mRNA-Seq Kit (KAPA) according to the manufacturer’s instructions.Libraries were sequenced using HiSeq2500 (Illumina) in paired-read mode, creating reads with a length of 125 bp.
2019-08-07 | GSE120645 | GEO
Project description:RNA-Seq procedure was used for analysis of expression in HEK293T cells. Cells were separately lysed with Trizol reagent (Invotrogen). Total RNA was extracted from cell lysed with Trizol reagent and PureLink RNA Micro Kit (Invitrogen) according to manufacture instruction. RNA quality was checked with BioAnalyser and RNA 6000 Nano Kit (Agilent). Poly(A)+ RNA was purified with Dynabeads® mRNA Purification Kit (Ambion). Illumina library was prepared from poly(A)+RNA with NEBNextNEBNext® Ultra™II RNA Library Prep Kit for Illumina® (NEB) according to manual. Sequencing was performed on HiSeq1500 with 50 bp read length. At least 10 millions of reads were generated for each sample.
2019-12-03 | GSE130262 | GEO
Project description:RNA-Seq procedure was used for analysis of expression in HEK293T cells. Heat shock treatments was performed for 20 min at 43°C. Then heat shock treated cells were incubated for 6 h at 37°C and replicates were separately lysed with Trisol reagent. Total RNA was extracted from cell lysed with Trisol reagent and PureLink RNA Micro Kit (Invitrogen) according to manufacture instruction. RNA Quality was checked with BioAnalyser and RNA 6000 Nano Kit(Agilent). Poly(A)+ RNA was isolated with Dynabeads® mRNA Purification Kit (Ambion). Illumina library was prepared from poly(A)+RNA with NEBNextNEBNext® Ultra™II RNA Library Prep Kit for Illumina® (NEB) according to manual. Sequencing was performed on HiSeq1500 with 50 bp read length.
2019-12-03 | GSE130493 | GEO
Project description:RNA was isolated from control and Mettl3 cKO mouse testes using the TRIzol (Invitrogen) reagent by following the manufactures's instructions. For all samples the RNA integrity was checked using an Agilent Bioanalyzer 2100. All samples showed a RIN (RNA integrity number) of higher than 9. For RNA-seq, approximately 2.5 µg of total RNA was then used for library preparation using a KAPA Stranded mRNA-Seq Kit Illumina® platform (KAPABIOSYSTEMS, KR0960) according to the manufacturer’s protocol.For m6A-miCLIP-seq, 6 ug of mRNA was first fragmented and immunoprecipitated with m6A antibody and thus obtained m6A containing RNA was subjected to cDNA library construction according to previously reported method [Linder et al. 2015; PMID: 26121403].All the libraries were sequenced using HiSeq3000 (Illumina) in paired-read mode, creating reads with a length of 101 bp. Sequencing chemistry v2 (Illumina) was used.
2017-08-16 | GSE99772 | GEO
Project description:RNA was isolated from control and Mettl3 cKO mouse testes using the TRIzol (Invitrogen) reagent by following the manufactures's instructions. For all samples the RNA integrity was checked using an Agilent Bioanalyzer 2100. All samples showed a RIN (RNA integrity number) of higher than 9. For RNA-seq, approximately 2.5 µg of total RNA was then used for library preparation using a KAPA Stranded mRNA-Seq Kit Illumina® platform (KAPABIOSYSTEMS, KR0960) according to the manufacturer’s protocol.For m6A-miCLIP-seq, 6 ug of mRNA was first fragmented and immunoprecipitated with m6A antibody and thus obtained m6A containing RNA was subjected to cDNA library construction according to previously reported method [Linder et al. 2015; PMID: 26121403].All the libraries were sequenced using HiSeq3000 (Illumina) in paired-read mode, creating reads with a length of 101 bp. Sequencing chemistry v2 (Illumina) was used.
2017-08-16 | GSE99771 | GEO
Project description:We exposed a panel of 32 breast cancer cell lines or normal human mammary epithelial cells to 20% or 1% O2 concentration for 24h. Total RNA was extracted from cells using TRIzol (Invitrogen) and treated with DNase I (Ambion). All samples had a RIN value of >9.0 when measured on an Agilent Bioanalyzer. Libraries for RNA-Seq were prepared with KAPA Stranded RNA-Seq Kit. The workflow consisted of mRNA enrichment, cDNA generation, end repair to generate blunt ends, A-tailing, adaptor ligation and 12 cycles of PCR amplification. Unique adaptors were used for each sample in order to multiplex samples into several lanes. Sequencing was performed on Illumina Hiseq 3000/4000 with a 150bp pair-end run. A data quality check was done on Illumina SAV. Demultiplexing was performed with Illumina Bcl2fastq2 v 2.17 program.
2018-12-26 | GSE111653 | GEO