Genome-wide maps of RNA-protein interactions of SRSF3, hnRNPK and CPSF6
Ontology highlight
ABSTRACT:
ORGANISM(S): Mus musculus
PROVIDER: GSE161602 | GEO | 2021/07/20
REPOSITORIES: GEO
Similar Datasets
Project description:Endocrine disruption can trigger far-reaching effects on environmental populations, justifying a refusal of market approval for chemicals with ED properties. Ecotoxicogenomic screening was performed to identify molecular fingerprints for endocrine disrupting chemicals affecting the thyroid system in zebrafish (Danio rerio) embryos as aquatic vertebrate model and alternative to animal testing. 6-Propyl-2-thiouracil (6PTU, CAS: 51-52-5) was tested as a model substance for anti-thyroidal activity. In a modified version of the zebrafish embryo toxicity test (OECD 236), 15 fertilized eggs were exposed to two different sub lethal concentrations of 6PTU for 96 hours under semi-static conditions. Each test comprised of a low exposure (LE), high exposure (HE) and negative control (NC) group and was performed in triplicates. At 96 hours post fertilization 10 larvae were randomly picked from each sample group and pooled for RNA and protein extraction with NucleoSpin© RNA/Protein kit (Macherey-Nagel). RNA quality was assessed via a 2100 Bioanalyzer system (Agilent) before coding RNA was purified (PolyA selection with TruSeq RNA Library Prep Kit v2) and sequenced on an Illumina HiSeq 4000 System (Illumina) in 50 bp single read mode, producing ~ 30 million reads per sample. Initial BCL files were demultiplexed to fastq files via bcl2fastq. Adapter sequences were removed with trimmomatic and sequences were aligned to the D.rerio reference genome (GRCz11) with STAR. Counting of feature mapped reads was performed through featureCounts. Library mapped read tables were then merged to a single count matrix. Using this matrix as input, read counts were normalized with DESeq2 for differential gene expression analysis.
2020-09-30 | E-MTAB-9054 | biostudies-arrayexpress
Project description:The goal of this study is to perform RNAseq in different sub-types of the zebrafish embryonic dorsal aorta (DA) at 28-30 hpf using TgBAC(runx1P2:Citrine);Tg(kdrl:mCherry) double-transgenic zebrafish embryos. A min. of 3000 cells per population were collected via FACS. RNA was isolated with the RNeasy Plus Micro Kit (QIAGEN, Cat No. 74034). High quality RNA (RIN > 8.0) was sent for RNAseq to the Wellcome Trust Centre for Human Genetics (WTCHG). 2.2 ng of total RNA was used to generate SMARTer libraries for low-input RNA. Sequencing was performed on an Illumina HiSeq4000 machine with a 75 bp paired end protocol. Sequenced reads were checked for base qualities, trimmed where 20% of the bases were below quality score 20, and filtered to exclude adapters using Trimmomatic (Version 0.32). Sequences were aligned to the Zebrafish Genome Zv10 with STAR with default parameters. Aligned read features were counted using Subread tool: featureCounts method (version 1.4.5-p1). To determine number of mapped reads we used the trimmed data. The alignment has been performed using STAR with default parameters. The number of mapped reads (QC-passed reads count) has been obtain using Samtools mapping statistics (flagstat tool).
2019-06-06 | GSE132259 | GEO
Project description:To better understand the mechanism by which MAGEA3 contributes to HCC progression, we conducted RNA sequencing in the PLC5 HCC cell line after 72 hours of treatment with scramble or sh8375 in triplicate. RNA-sequencing was conducted on poly-A enriched RNA, 100 bp single reads using an Illumina HiSeq2500 instrument. Libraries were constructed using the TruSeq RNA Library Prep Kit v2. Raw sequencing reads were mapped to the GRCh38 reference genome (USCS) using STAR (2.4.2g1). Aligned reads were mapped to GRCh38 genetic features using featureCounts from the subRead package with default settings. Data analysis included differential gene expression between conditions and gene set enrichment analysis.
2021-05-19 | E-MTAB-8860 | biostudies-arrayexpress
Project description:The aim of this sequencing experiment was to screen for ecotoxicogenomic fingerprints for endocrine disrupting chemicals affecting the thyroid system in zebrafish (Danio rerio) embryos as aquatic vertebrate model and alternative to animal testing. Triiodothyronine (T3, CAS: 6893-02-3) was tested as a model substance for thyroidal inducing activity. In a modified version of the zebrafish embryo toxicity test (OECD 236), 15 fertilized eggs were exposed to two different sub lethal concentrations of T3 for 96 hours under semi-static conditions. Each test comprised of a low exposure (LE), high exposure (HE) and negative control (NC) group and was performed in triplicates. At 96 hours post fertilization (hpf), 10 larvae were randomly picked for each sample and pooled for RNA and protein extraction with NucleoSpin RNA/Protein kit (Macherey-Nagel). RNA quality was assessed with a 2100 Bioanalyzer system (Agilent) before coding RNA was purified (PolyA selection with TruSeq RNA Library Prep Kit v2) and sequenced on an Illumina HiSeq 4000 System (Illumina) in 50 bp single read mode, producing roughly 30 million reads per sample. Adapter sequences were removed with trimmomatic and sequences were aligned to the D.rerio reference genome GRCz11 with STAR. Counting of feature mapped reads was performed through featureCounts. Library gene count tables were then merged to a single count matrix as input for differential gene expression analysis with DESeq2.
2020-09-30 | E-MTAB-9056 | biostudies-arrayexpress
Project description:Human nontransformed retinal pigment epithelia RPE-PPM1D-T2 cells carrying a truncating mutation in exon 6 of the PPM1D were exposed to ionising radiation (3 Gy) and subsequently were grown in semisolid media for 8 weeks. Six spheroid clones (RPE-PPM1D-T2-SA clones 1-6) were recovered and then were cultivated in adherent conditions. RNA was isolated from asynchronically growing parental RPE-PPM1D-T2 and transformed RPE-PPM1D-T2-SA-1 to 6 cells and was subjected to whole exome sequencing. RNA sequencing libraries were prepared using KAPA RNA HyperPrep Kit (Roche) and were sequenced on the NovaSeq 6000 system using NovaSeq S1 Reagent Kit v1.5, 200 cycles (Illumina) with mean coverage >120 for RNA samples, respectively. RNA fastq files were mapped to the hg19 reference using Novoalign (novoalign_2.08.03). PCR duplicates were removed from the BAM files using Picard Tools (picard-tools 1.129), and variant calling was performed using GATK HaplotypeCaller (3.8). RNA fastq files were mapped to the hg19 reference using STAR (STAR-2.5.2b). The PCR duplicates were removed using Picard Tools (picard-tools 1.129). All parts of RNAseq data analysis were conducted in R, version 4.3.2. and RNAseq read counts were normalized using R package DESeq2. Fold change (FC) and log2FC were calculated from normalized reads, nontransformed RPE-PPM1D-T1 cells were considered a reference. Significance of differential expression for each gene was evaluated by Fisher's t-test with simulated p-values and Holm's p-value correction for multiple comparisons.
2024-04-05 | E-MTAB-13933 | biostudies-arrayexpress
Project description:The purpose of this experiment was to compare the transcriptomes of M. jannaschii using RNA-Seq gene expression analyses to understand the physiology of this organism when it is grown under H2-replete, H2-limited and H2-syntrophy conditions. The RNA-seq reads were mapped to both M. jannaschii and T. paralvinellae genomes using BBSplit from BBMap package. BBSplit is an aligner tool that bins sequencing reads by mapping to them multiple references simultaneously and separates the reads that map to multiple references to a special "ambiguous" file for each of them. For further analyses we removed all ambiguously mapped reads to both genomes and worked with only the reads that unambiguously map to M. jannaschii genome. The mapped reads for M. jannaschii were then aligned to the M. jannaschii genome again and sorted using the STAR aligner version 2.5.1b . Aligned sequence reads were assigned to genomic features and quantified using featureCounts read summarization tool. Genes that were differentially expressed were identified using ‘DESeq2’ in the Bioconductor software framework in R. The differential gene expression analyses showed that the enzyme responsible for the reduction of methenyl group to a methylene group during carbon fixation switches from a H2-dependent enzyme to a coenzyme F420-dependent enzyme with decreasing H2 availability and into syntrophy. During syntrophy, the genes for energy generation on the membrane decreased in their expression levels.
2019-03-11 | GSE112986 | GEO
Project description:Purpose:In order to assess the toxicity of AFB1 in chicken liver and the mechanism of curcumin alleviating AFB1-induced liver toxicity in chicken, we established a co-administered model to investigate LncRNA and mRNA profiles of chicken liver. Methods: RNA extracted by Total RNA Extractor (Trizol) was utilized to construct the final library. Libraries were pooled and sequenced on a 150-bp paired-end Illumina HiSeq™ 2000 run. The sequencing data obtained from Illumina Hiseq™ was filtered to get clean reads using Trimmomatic. The reads themselves and their matching reads which length was less than 35nt were removed. Clean reads were aligned to the reference sequence (Gallus_gallus-5.0, NCBI) using HISAT2. Results: Sampling directly from the liver yielded sufficient quantities of RNA to assess transcripts from each chicken and mapped to 24,883 Gallus gallus genes. Conclusions: We used the method of RNA-seq to find the target genes and related signaling pathways involved in the co-administered (AFB1 and curcumin) and their underlying mechanisms.
2022-04-02 | GSE148014 | GEO
Project description:This track is produced as part of the ENCODE Project. It shows high throughput sequencing of RNA samples from tissues or sub cellular compartments from cell lines included in the ENCODE Transcriptome subproject. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf The RNA-Seq data were generated from high quality polyA RNA, and the RNA-Seq libraries were constructed using SOLiD Whole Transcriptome (WT) protocol and reagent kit. Total RNA in good quality was used as starting materials and purified twice through MACs polyT column aimed to enrich polyA and remove any contaminants (e.g., rRNA, tRNA, DNA, protein etc.). A one microgram enriched polyA RNA sample was then fragmented to small pieces, and a gel-based selection method was performed to collect fragmented random polyA at a size-range of 50-150 nt in length. The collected fragmental RNA was then hybridized and ligated to a mix of adapters provided from ABI, followed by reverse transcription to generate corresponding cDNAs. The resulting cDNA library was further amplified by PCR and sequenced by SOLiD platform for single reads at 35 bp length (new version in 50 bp length). Cells were grown according to the approved ENCODE cell culture protocols. Data: The SOLiD-generated RNA-Seq reads were 35 bp in length. An initial filtering process was performed to remove any non-desirable contamination sequences, such as rRNA, tRNA, and repeats etc. A read-split mapping approach was developed to map the 35 bp reads onto the reference genome (GRCh37/hg19) excluding mitochondrion, haplotypes, randoms and chromosome Y. Mapping parameters: Strand specific mapping was done using Applied Biosystems' SOLiD alignment where all the reads were mapped to the genome, and to exon-exon junction database. Seed and extend strategy is adopted where initial seed length of 25 is mapped with maximum of 2 mismatches and then extended to read length, each color space match is awarded a score of +1 and each mismatch is awarded a penalty of -2. After extension each read is trimmed to its maximum score, shortest length. The color space sequences are then converted into base space and checked to ensure that each sequence has a maximum of 2 base pair mismatches. If any sequence has more than 2 mismatches, then that sequence is discarded.
2011-02-14 | E-GEOD-27221 | biostudies-arrayexpress
Project description:Purpose: To analyze the sensitivity and specificity of the AmpFISH method, we sequenced the NIH3T3 cell line via UMI-RNAseq experiments. Methods:NIH3T3 cells were grown in DMEM (Dulbecco’s Modified Eagle Medium, Gibco) supplemented with 10% FBS (Fetal Bovine Serum, Sigma), 50U/ml Penicillin and 50 mg/ml streptomycin (Gibco,cat.no.15070) at 37℃ with 5% CO2. Cells were treated with 0.25% trypsin solution (HyClone, No.SH42605.01) when they reached ~106 cells/ml. Then, the cells were washed with 1X PBS, and then mixed with 1ml TRIzol solution (ThermoFish, No.15596029), and snap-frozen with dry ice. Total RNA was qualitatively and quantitatively evaluated as follows: (1) the RNA sample was initially qualitatively evaluated using 1% agarose gel electrophoresis for possible contamination and degradation; (2) RNA purity and concentration were then examined using NanoPhotometer spectrophotometer; (3) RNA integrity and quantity were finally measured using RNA Nano 6000 Assay Kit of the Bioanalyzer 2100 system. After library preparation and pooling of different samples, the samples were subjected to Illumina sequencing. The libraries were sequenced using the Illumina NovaSeq 6000 Platform for 6G raw data and generated 150nt pair-end reads. UMI sequences on each read were identified by UMI-tools (1.0.0), and reads with UMIs were used for the subsequent analysis. To identify the duplicated reads, UMIs were initially removed from the UMI reads, and the remaining parts of each read were mapped to the reference genome using Hisat2. Reads that mapped to the same location on the reference genome were identified as duplicated reads. Then, the UMIs on each read were recalled, and the duplicated reads with the same UMI were identified as non-natural duplications, which were subsequently removed from the processed data. HTSeq v0.6.1 was used to count the read numbers mapped to each gene. Then, the FPKM of each gene was calculated based on the length of the gene, and the read count was mapped to the gene. Conclusions:AmpFISH provides convenient and versatile tools for sensitive RNA/DNA detection and to gain useful information on cellular molecules using simple workflows
2021-08-11 | GSE181685 | GEO
Project description:We collected up to 6 separate analytes per patient from 14 HNSCC individuals and evaluated spatial (9 cases) and/or temporal (8 cases) variability using RNAseq. Sections taken from a frozen section using a crytostat were analysed for RNA quality was assessed using the Agilent 2100 Bioanalyser (Agilent Technologies UK Ltd., Stockport, UK). Total RNA was converted into a library for sequencing on the HiSeq 2000 (Illumina Inc., San Diego, USA) using the TruSeq⢠stranded mRNA Sample Preparation Kit (Illumina Inc.). Briefly, poly-A mRNA was purified from total RNA (100ng) using the Poly(A) Purist Mag Kit (Life Technologies Ltd., Paisley, UK), according to the manufacturerâs instructions. The mRNA was then amplified and converted into cDNA, which was purified and used to construct libraries that were hybridized to the flow cell for single end (SE 35bp) sequencing. The protocol employed yielded 35-bp long reads. The quality of raw SE read data in FASTQ files were assessed and reads of low quality were trimmed or removed. SE reads were then mapped to the human genome (hg19) using TopHat (version 2.0.9) and, following the removal of multi-mapping reads, converted to gene specific read counts for annotated genes using HTSeq-count (version 0.5.4).
2017-09-15 | E-MTAB-4546 | biostudies-arrayexpress