Real-time quantitative PCR analysis of Chromatin-associated snoRNA in human NB4 cells using Arraystar_384 platform
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE173730 | GEO | 2021/05/04
REPOSITORIES: GEO
Similar Datasets
Project description:Cells were washed with cold PBS twice and scraped from the plates, then centrifuged at 1000 rpm for 5 min to pellet cells. Washed cells were lysed with 400 L of cell lysis buffer (10 mM Tris-HCl pH7.5, 150 mM NaCl, 0.15% NP-40 and proteinase inhibitor cocktail) and incubated on ice for 10 min. The suspension was carefully add at the top of sucrose buffer (10 mM Tris-HCl pH7.5, 150 mM NaCl, 24% sucrose), and centrifuged at 3200g for 10 min to collect nuclear pellets. Pellets were resuspended in 250 L of Glycerol buffer (20 mM Tris-HCl pH7.5, 75 mM NaCl, 0.5 mM EDTA pH8.0, 50% glycerol), then then immediately add 250 μl Nuclear lysis buffer (10 mM Tris-HCl pH7.5, 300 mM NaCl, 7.5 mM MgCl2, 0.2 mM EDTA pH8.0, 1% NP-40, 1M urea). Mix by vortexing for 4 s and incubate on ice for 2 min. Centrifuge the lysate at 13,000 × g for 2 min to precipitate the chromatin–RNA complex. Briefly rinse the chromatin pellets with PBS-EDTA. RNA was extracted with Trizol reagent. RNA libraries were prepared according to manual of SMARTer smRNA-Seq Kit for Illumina (Clontech, 635031).
2019-10-15 | GSE134103 | GEO
Project description:Each colony of A. hydrophila and the OXY-R strain were incubated in 5 mL LB medium overnight, and then diluted in 100 mL fresh LB medium at a ratio of 1:100 and subsequently cultured until the optical density at 600 nm (OD600) reached 1.0. The cultures were harvested via centrifuging for 20 min at 10,000 x g, 4°C, and then the bacterial cells were washed with cold phosphate buffered saline (PBS, pH 7.4) for three times. The cell pellets were resuspending in the 10 mL ultrasonic buffer (50 mM Tris-HCl, pH 7.4, 1 mM PMSF) and disrupted with intermittent sonic oscillation for a total of 30 minutes at 9 seconds intervals on ice. Subsequently, the cell debris and unbroken cells were separated by centrifugation at 8,000 x g for 20 min at 4°C. Then the supernatant was centrifuged at 100,000 x g for 1 h at 4°C in the Optima LE-80 K Ultracentrifuge (Beckman, Palo Alto, CA, USA). After the pellet was dissolved with 2% sodium lauroyl sarcosine (in 50 mM Tris-HCl, pH 7.5) for 40 min at room temperature (RT), the pellets were ultracentrifuged again at 100,000 x g for 1 h at 4°C. Finally, the precipitate was dissolved in an appropriate volume of SDT buffer (4 % SDS, 0.1 M DTT [dithiothreitol], and 0.5 M triethylammonium bicarbonate buffer [TEAB, pH 8.5]). The protein concentration was determined using the Bradford method and then stored at -20°C until subsequent use.The proteins were digested with trypsin after being reduced with DTT and alkylated with Iodoacetamide using a filter-aided sample preparation method (Tanca et al., 2013; Li et al., 2016b). After washing three times with 0.5 M TEAB followed by fractionation using the 10 kDa ultrafiltration system (Millipore, Billerica, MA, USA), about 100 μg digested peptide from each group, including two biological replicates, was taken out for further labeled using TMT isobaric and isotopic mass-tagging kits (Thermo Fisher Scientific, MA, USA), which was performed according to instructions from the kit.
2018-11-23 | PXD009622 | Pride
Project description:To identify the transcripts fractionated into microsome fraction in ribosome-independent manner, we isolate rough microsome fraction by sucrose density gradient ultracengrifugation, then the rough microsome fraction is centrifugated following treatment with puromycine and EDTA in high-salt buffer to remove ribosomes. The pellet and surpernatant are named naked microsome fraction (NM) and stripped ribosome fraction (SR), respectively. By calculating the ratio of the level of each mRNA in NM and SR, we identify the enriched transcripts in NM.
2016-12-25 | GSE85768 | GEO
Project description:Strain background is Saccharomyces cerevisiae wzy42 histone mutant strain with pWZ403 Myc-HHT2-HHF2 plasmid and pGAL1/10 FLAG-HHT1-HHF1 integrated gene. Cells were grown in YP+2% raffinose until mid-log (OD600=0.5) and arrested with alpha factor. When most of Cells were in G1 phase, added galactose (final conc. 2%) and harvested cells after 1 hour. Fixed cells were harvested by centrifugation at 4 Celcius degrees and the cell pellets were washed by 15mL of pH7.5 TBS buffer per a conical tube. ChIP cells were disrupted by glass bead vortexing in ChIP lysis buffer and sonicated by Sonic Dismembrator Model 500, Fisher Scientific. Sonicated soluble lysate were immunoprecipiated by FLAG antibody (F1804; Sigma).
2017-11-18 | GSE106450 | GEO
Project description:Yeast cells were incubated at 25˚C, unless otherwise stated. For SILAC, cells were grown in light labeled (0.03mg/ml Lys0, 0.02mg/ml Arg0) or heavy labeled (0.03mg/ml Lys4, 0.02mg/ml Arg6) amino acid in synthetic defined medium with 2% dextrose for at least 7 generations. heat shock was performed in a shaking water bath at 45˚C for 20 minutes before harvest. Equal OD600 of cells from both labels were collected at mid log phase (OD¬600=0.8-1) by centrifugation at 3,220xg for 5 minutes at 4˚C, washed twice with cold 1×TBS (50mM Tris pH 7.5, 150mM NaCl), mixed, and re-suspended in equal volume of 2×Native lysis buffer (200mM Tris pH 7.5, 150mM NaCl, 2mM PMSF, 2×Protease Inhibitor Cocktails (Sigma-Aldrich), 2mM 1,10-Phenanthroline). Re-suspended cells were snap-frozen drop by drop in liquid nitrogen. The resulting cells pellets were lysed by cyro-grinding in liquid nitrogen with a mortar and pestle mounted on an electric driver (OPS Diagnostics). The lysate was thawed on ice and further diluted 3 times by adding ice-cold 1×Native lysis buffer and 1% NP40 (final concentration). Total cell lysate was pre-cleared twice by centrifugation at 1,000×g at 4˚C for 15min. Pellet fraction was separated by centrifugation at 16,100×g at 4˚C for 15min. The insoluble protein pellet was washed twice with ice-cold 1×Native lysis buffer containing 1% NP40 and re-solubilized in 1×Laemmli Sample Buffer (62.5mM Tris-HCl pH6.8, 2% SDS, 10% Glycerol). Protein concentrations were determined by using BioRad DC™ Protein Assay.
2020-06-12 | PXD012631 | Pride
Project description:gDNA was estracted and digested with cocktail of restrict enzymes MseI, DdeI, AluI, MboI, incubated at 37°C for 6 h. After purified by phenol/chloroform extraction, fragmented DNA was resuspended by TE, and quantified by Qubit 3.0 (Invitrogen). For each sample, 20 μg input DNA was immunoprecipitated overnight at 4°C in a shaker, with 1× DRIP binding buffer (10 mM NaPO4 pH 7.0, 140 mM NaCl, 0.05% Triton X-100) and 10 μg S9.6 antibody (ATCC, HB-8730). After adding 50 μl Dynabeads Protein G (Invitrogen, 10004D) and incubated for 4 h, the beads with antibody were washed by 1× DRIP binding buffer for 4 times at room temperature, each wash takes 10 min. Added 250 μl elution buffer (50 mM Tris pH 8.0, 10 mM EDTA, 0.5% SDS) and 5 U Proteinase K to beads/antibody complexes, incubated for 40 min in an Eppendorf ThermoMixer at 55°C, 1,000 rpm. Purified by phenol/chloroform extraction, and moved supernatant to a new tube, followed by adding 1/10 volume 3 M NaAc, 1 μl GlycoBlue (Invitrogen) and 1 volume isopropanol, precipitated at -20°C for 3 h and then centrifuged. After washed by 70% ethanol and dried, the DRIPed DNA pellet was resuspended by 75 μl low EDTA TE buffer (10 mM Tris-HCl 8.0, 0.1 mM EDTA). NGS libraries were constructed using Accel-NGS® 1S Plus DNA Library Kit (Swift Biosciences).
2019-10-15 | GSE134101 | GEO
Project description:For modified iCLIP experiment, 4SU was used for crosslinking as described in published protocol (citation is bellow) and the RNase conditions were optimised to ensure efficient RNase I-dependent fragmentation. In detail, HEK293T cells were grown on 10 cm 2 dishes, incubated for 8 h with 100 M 4SU and crosslinked with 2x 400mJ/cm 2 365nm UV light. Protein A Dynabeads were used for immunoprecipitations (IP). 80 l of beads were washed in iCLIP lysis buffer (50mM Tris-HCl pH 7.4, 100 mM NaCl, 1% NP-40, 0.1% SDS, 0.5% sodium deoxycholate). For the preparation of the cell lysate, 2 million cells were lysed in 1 ml of iCLIP lysis buffer (50 mM Tris-HCl pH 7.4, 100 mM NaCl, 1% NP-40, 0.1% SDS, 0.5% sodium deoxycholate) buffer, and the remaining cell pellet was dissolved in 50 L MSB lysis buffer (as above). After the pellet had dissolved, the mixture was diluted with CLIP lysis buffer to 1000 l and an additional centrifugation was performed. Lysates were pooled (2ml total volume) and incubated with 4 U/ml of RNase I and 2 l antiRNase (1/1000, AM2690, Thermo Fisher) at 37C for 3 min, and centrifuged. We took care to prepare the initial dilution of RNase in water, since we found that RNase I gradually loses its activity when diluted in the lysis buffer. 1.5 ml of the supernatant was then added to the beads and incubated at 4C for 4 h. The rest of the protocol was identical to the published protocol (see bellow). Huppertz I, Attig J, D'Ambrogio A, Easton LE, Sibley CR, Sugimoto Y, Tajnik M, Knig J, Ule J: iCLIP: protein-RNA interactions at nucleotide resolution. Methods 2014, 65:274-287.
2016-11-24 | E-MTAB-5027 | biostudies-arrayexpress
Project description:The chromatin fraction was isolated from 5x107 HeLa cells. Chromatin was digested in 100 mL of MNase (40 units/ mL ) reaction buffer for 3 min at 37 °C in a thermomixer (1,400 rpm). After addition of 10 L EGTA (25mM) to inactivate MNase, soluble digested chromatin was collected by 13,000 rpm centrifuge for 5 min. 10 mg of Pol II antibody was conjugated to magnetic protein A beads. The supernatant was diluted with 400 mL of NET-2 buffer and pSer2-Pol II antibody-conjugated beads were added. Incubated the IP reaction at 4 °C for 1 hr. The beads were washed with 1 mL of NET-2 buffer six times and 100 mL of 1xPNKT (1xPNK buffer and 0.05% Triton X-100) buffer once. Washed beads were incubated in 50 mL PNK reaction mix (1xPNKT, 1 mM ATP and 0.05 U/ml T4 PNK (NEB)) in Thermomixer at 37 °C, 1,400 rpm for 6 min. Beads were washed with 1 mL of NET-2 buffer once and RNA was extracted with Trizol reagent. RNA was suspended in urea Dye (7M Urea, 1xTBE, 0.1% BPB and 0.1% XC) and resolved on 6% TBU gel (Invitrogen) at 200 V for 5 min. Gels with 30-160 nt RNAs were collected. 0.2 mL tube was prepared with holes made with 25G needle and placed in a 1.5 mL tube. Gel fragments were placed in the layered tube and broken down by centrifugation at 12,000 rpm for 1 min. The small RNAs were eluted from gel using RNA elution buffer (1 M NaOAc and 1 mM EDTA) at 25 °C for 1 hr in Thermomixer (900 rpm). Eluted RNA was purified with SpinX column (Coster) with 2 glass filters (Millipore) and the flow-through RNA was ethanol precipitated.
2019-10-15 | GSE134102 | GEO
Project description:Using cell sorting technique, we collected Arabidopsis root hair protoplasts (transgenic line harboring root hair specific gene promoter ::GFP, here named GFP) and nonGFP protoplasts( whole root except root hair). Then, we extracted total proteins and RNA for proteome and RNASeq. RNAseq data have already been deposited into NCBI (accession numbers SRR364677 and SRR364678). Total proteins were separated by 1D SDS-PAGE, followed by gel slicing, in gel digested and run ESI-LC-MS/MS on LTQ Orbitrap Velos. We set two biological repeats and each sample was scanned two times (two technique repeats). We then combined all ms/ms raw data from all fractions and technique repeats from one biological sample into one file to indentify proteins by searching Arabidopsis protein database with software Proteome Discoverer (with two searching engines mascot and sequester). Protocol: Protoplasts from EXP7 and non-GFP protoplastswere stored at -80°C, thawed on ice for 5 min, vortexed several times and suspended in 5 x volume of pre-cooled acetone (-20°C) containing 10% (v/v) trichloroacetic acid (TCA) and 0.07% (v/v) 2-mercaptoethanol. Proteins were then precipitated for 2 h at −20°C after thorough mixing. Proteins were collected by centrifuging at 35,000 g (JA-20 108 rotor, Beckman J2-HS) at 4°C for 30 min. The supernatant was removed and the protein pellets were washed three times with cold acetone containing 0.07% (v/v) 2-mercaptoethanol and 1 mMphenylmethanesulfonylfluoride. Protein pellets were dried by lyophilization and stored at -80°C, or immediately extracted using Laemmli buffer (63 mM TrisHCl pH 6.8, 10% glycerol, 2% SDS, 0.0025% bromophenol blue). Protein concentration was determined using Pierce protein assay kit (Pierce, Rockford). Proteins from each sample were separated using a Bis-Tris precast gradient gel (4−16%, Bio-Rad) according to the manufacturer’s instructions. After electrophoresis, the gel was Coomassie-stained using the Colloidal Blue Staining Kit (Invitrogen). The protocol used for in-gel trypsin digestion of proteins in gels was adapted from the method described in Shevchenko et al. (1996). Briefly, protein bands were manually excised and each band was cut into small pieces (~0.5 mm). The gel pieces were washed three times with a solution containing 50% methanol and 5% acetic acid for 2 h, twice with a solution containing 25 mM NH4HCO3 in 50% acetonitrile for 10 min each, and then the gel pieces were dried in a vacuum centrifuge. Reduction of proteins in gel pieces was performed with DTT and alkylation with iodoacetamide, and the gel pieces were washed and dried in a vacuum centrifuge. A trypsin solution in 25 mM NH4HCO3 containing 75 to 100 ng of sequencing grade modified trypsin (Promega) in 25-40 µl was added and incubated with gel pieces for 12-16 h at 37°C. To recover the tryptic peptides, a solution of 30 µl containing 5% formic acid and 50% acetonitril was added to the gel pieces, agitated in a vortex for 30-60 min and withdrawn into a new tube. The recovery was repeated once with 15 µl solution and the resulting two recovers were combined and dried in a vacuum centrifuge. The dried pellet was re-dissolved in 10-20 µl of 0.1% formic acid for LC-MS/MS analysis.
2013-05-28 | PXD000195 | Pride
Project description:The hermaphrodite strain N2 (Bristol), fed with Escherichia coli OP50, was maintained and synchronized. Young adults were thoroughly washed before incubations for 5 h or 24 h in M9 buffer. Between 35,500 and 158,000 worms were used for each experiment. After incuabtion, supernatants were processed by differential centrigugation/ultracentrifugation to pellet extracellular vesicles and characterization of the protein contents by mass spectrometry.
2020-05-04 | PXD017352 | Pride