Microarray analysis of serum from esophageal squamous cell carcinoma
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE192662 | GEO | 2021/12/30
REPOSITORIES: GEO
Similar Datasets
Project description:To further investigate the transcriptome profiles of EEF1D knocked-down and control BMECs, total RNA from the knocked-down BMECs treated with EEF1D-1357 or EEF1D-1893 shRNA, and the BMECs treated without shRNA, was extracted and purified, reversely transcribed into cDNA, and synthesized into cRNAs labeled with Cy3 using a Quick Amp Labeling Kit (Agilent). Afterwards, the labeled cRNAs (1.65 μg) were hybridized to a piece of Agilent Bovine Gene Expression 4×44K Chip using a Gene Expression Hybridization Kit (Agilent).
2020-11-25 | GSE162088 | GEO
Project description:Total RNA from each sample was quantified using the NanoDrop ND-1000. The sample preparation and microarray hybridization were performed based on the Arraystar’s standard protocols. Briefly, total RNA from each sample was amplified and transcribed into fluorescent cRNA utilizing random primer according to Arraystar’s Super RNA Labeling protocol (Arraystar Inc.). The labeled cRNAs were hybridized onto the Arraystar Human circRNA Array (8x15K, Arraystar). After having washed the slides, the arrays were scanned by the Agilent Scanner G2505C.
2020-02-05 | GSE138589 | GEO
Project description:We have completed the Arraystar Human circRNA Array analysis of the 24 samples that you submitted. Total RNA from each sample was quantified using the NanoDrop ND-1000. The sample preparation and microarray hybridization were performed based on the Arraystar’s standard protocols. Briefly, total RNAs were digested with Rnase R (Epicentre, Inc.) to remove linear RNAs and enrich circular RNAs. Then, the enriched circular RNAs were amplified and transcribed into fluorescent cRNA utilizing a random priming method (Arraystar Super RNA Labeling Kit; Arraystar). The labeled cRNAs were hybridized onto the Arraystar Human circRNA Array (8x15K, Arraystar). After having washed the slides, the arrays were scanned by the Agilent Scanner G2505C. Agilent Feature Extraction software (version 11.0.1.1) was used to analyze acquired array images. Quantile normalization and subsequent data processing were performed using the R software package. Differentially expressed circRNAs with statistical significance between two groups were identified through Volcano Plot filtering. Differentially expressed circRNAs between two samples were identified through Fold Change filtering. Hierarchical Clustering was performed to show the distinguishable circRNAs expression pattern among samples.
2023-05-08 | GSE150251 | GEO
Project description:We have completed the Arraystar Human circRNA Array V2 analysis of 10 bile exosome samples (5 cholangiocarcinoma-induced biliary obstruction vs. 5 benign biliary obstruction). Total RNA from each sample was quantified using the NanoDrop ND-1000. The sample preparation and microarray hybridization were performed based on the Arraystar’s standard protocols. Briefly, total RNAs were digested with Rnase R (Epicentre, Inc.) to remove linear RNAs and enrich circular RNAs. Then, the enriched circular RNAs were amplified and transcribed into fluorescent cRNA utilizing a random priming method (Arraystar Super RNA Labeling Kit; Arraystar). The labeled cRNAs were hybridized onto the Arraystar Human circRNA Array V2 (8x15K, Arraystar). After having washed the slides, the arrays were scanned by the Agilent Scanner G2505C. Agilent Feature Extraction software (version 11.0.1.1) was used to analyze acquired array images. Quantile normalization and subsequent data processing were performed using the R software limma package. Differentially expressed circRNAs with statistical significance between two groups were identified through Volcano Plot filtering. Differentially expressed circRNAs between two samples were identified through Fold Change filtering. Hierarchical Clustering was performed to show the distinguishable circRNAs expression pattern among samples.
2024-04-20 | GSE228477 | GEO
Project description:Total RNA was quantified by the NanoDrop ND-2000 (Thermo Scientific)and the RNA integrity was assessed using Agilent Bioanalyzer 2100 (Agilent Technologies). The sample labeling, microarray hybridization and washing were performed based on the manufacturer's standard protocols. Briefly, total RNA were transcribed to double strand cDNA, then synthesized into cRNA and labeled with Cyanine-3-CTP. The labeled cRNAs were hybridized onto the microarray. After washing, the arrays were scanned by the Agilent Scanner G2505C (Agilent Technologies).
2021-02-04 | GSE166057 | GEO
Project description:Goal of experiment: Identification of differentially expressed immune genes from male and female BWF1 lupus-prone mice. (Female incidence is higher than male--attempting to find sex hormone regulated genes that may contribute to this difference). Whole spleen was taken from pre-lupus (4 months old) BWF1 (females are lupus-prone) male and female mice. Preparation of cDNA. Double-stranded cDNA was synthesized from purified RNA. The first strand was synthesized by incubating 5 μg of RNA with 100 pg/ml T7-(dT)24 primer (HPLC purified DNA primer sequence: 5’-GGCCAGTGAATTGTAATACG ACTCACTATAGGGAGGCGG-(dT)24 -3’ Genset Corp, San Diego, CA) at 70°C for 10 minutes. Samples were incubated for 1 hour at 42°C with the following mix: 1X first strand buffer, 10 mM dithiothreitol, 500 μM each dNTP, 200 U SuperScript II in diethylpyrocarbonate (DEPC)-treated water up to 20 μl. Second strand synthesis was performed by incubating the first strand with the following mix for 2 hours at 16°C: 1X second strand reaction buffer, 200 μM dntps, 10 U E. coli DNA ligase, 40 U E coli DNA Polymerase I, 2 U of E. coli RNase H up to 150 μl with DEPC-treated water (all reagents were contained in SuperScript Choice System for cDNA Synthesis, Invitrogen). A phenol/chloroform extraction was performed on the ds-cDNA preparation before biotin-labeled cRNA was generated. Synthesis and fragmentation of biotin-labeled cRNA (in vitro transcription). The ENZO BioArrayTM HighYieldTM RNA Transcript Labeling Kit (T7) (Enzo diagnostics, Inc., Farmingdale, NY) was used to produce large amounts of hybridizable biotin-labeled RNA targets by in vitro transcription from the ds-cDNA. The following mix was incubated at 37°C for 5 hours: 1 μg of ds-cDNA, 1X HY reaction buffer, 1X biotin labeled ribonucleotides, 1X dithiothreitol, 1X T7 RNA Polymerase. Biotin-labeled cRNA was run over RNeasy spin columns (Qiagen), quantified, and run on an agarose gel to visualize the size distribution of labeled transcripts. Twenty micrograms of cRNA was incubated with 1X fragmentation buffer for 35 minutes at 94°C. (5X fragmentation buffer: 200 mM Tris-acetate, pH 8.1, 500 mM KOAc, 150 mM MgOAc). After fragmentation, the samples were stored at -20°C until the hybridization was performed. Sample hybridization. Oligonucleotide microarrays (MGU74v2 A, B, and C GeneChip probe arrays; Affymetrix) were hybridized with labeled cRNA derived from spleens from individual mice. For each array,15 μg of fragmented cRNA was mixed with a hybridization cocktail consisting of 1X hybridization buffer (2X hybridization buffer: 100 mM MES, 1 M [Na+], 20 mM EDTA, 0.01% Tween), 0.5 mg/ml acetylated BSA (Invitrogen), 0.1 mg/ml herring sperm DNA (Promega), and water (BioWhittaker) up to 300 μl). Biotin labeled cRNA transcripts of the E. coli and P1 bacteriophage genes, BioB, bioC, bioD, and cre (GeneChip Eukaryotic Hybridization control kit, Affymetrix) were spiked into each hybridization mix at 1.5, 5, 25, and 100 pM to evaluate sample hybridization efficiency for each array. The hybridization cocktail was heated to 99°C and then 45°C for 5 minutes each before it was centrifuged to remove any insoluble material. The array was equilibrated to room temperature, moistened with 1X hybridization buffer, and incubated for 10 minutes at 45°C with rotation. After incubation, the buffer solution was removed from the array. The array was filled with 300 μl of the hybridization cocktail, placed in a rotisserie box in a 45°C oven, and incubated for 16 hours while rotating at 60 rpm. Washing and staining of array. The hybridization cocktail was removed and the GeneChip Fluidics Station 400 (Affymetrix) with Microarray Suite software (Affymetrix) was used to wash and stain the probe arrays with the following protocol: 10 cycles of 2 mixes/cycle with wash buffer A at 25°C, 4 cycles of 15 mixes/cycle with wash buffer B at 50°C, 30 minute incubation with staining solution at 25°C, 10 cycles of 4 mixes/cycle with wash buffer A at 25°C. Wash buffer A -- non-stringent wash buffer (6X sodium chloride sodium phosphate + ethylenediaminetetraacetic acid (SSPE), 0.01% Tween-20). (20X SSPE: 3 M NaCl, 0.2 M NaH2PO4, 0.02 EDTA) (BioWhittaker). Wash buffer B – stringent wash buffer (100mM MES, 0.1 M [Na+], 0.1% Tween 20). Staining solution (1X 2-(N-Morpholino)ethanesulfonic Acid (MES) stain buffer, 2 mg/ml acetylated BSA, 10 μg/ml Streptavidin Phycoerythrin (SAPE), and water up to 600 μl). (12X MES stain buffer: 1.22 M MES, 0.89 M [Na+]). Analysis. After staining, the probe arrays were scanned using the GeneChip 3000 Scanner (Affymetrix) with Microarray Suite software (Affymetrix). Technical and assay variation between arrays was corrected for by multiplying or dividing the overall intensity of each array by a scaling factor so that the overall intensity of each array was equivalent to facilitate comparison analysis. Keywords = BWF1 total spleen Keywords: repeat sample
2005-08-23 | GSE2336 | GEO
Project description:Fresh MEC1 cells (chronic lymphocytic leukemia) (ACC-497, DSMZ) previously untreated and treated in cultures in vitro with glycodendrimers (nanoparticle with maltotriose on the surface). MEC1 cells were centrifuged after incubation with drugs or dendrimers. Agilent’s Low Input Quick Amp Labeling Kit was used to generate fluorescent cRNA (complimentary RNA) with a sample input 100ng of total RNA for two-color processing. The method uses T7 RNA polymerase, which simultaneously amplifies target material and incorporates cyanine 3- or cyanine 5-labeled CTP. Amplification is typically at least a 100-fold from total RNA to cRNA with the use of this kit. cRNA quantification had been done using NanoDrop ND-1000 UV-VIS Spectrophotometer version 3.2.1. Arrays were placed onto the gaskets and than to the slide chamber in rotisserie in a hybridization oven set. Hybrydization was carried out at 65-Celsius degrees for 17 hours. Arrays were scanning using Agilent Scanner. Scan resolution was set up for 3μM.
2015-04-22 | GSE68094 | GEO
Project description:Gene expression analysis was conducted using Agilent Human1Av2 arrays (Agilent Technologies, Palo Alto, CA). Two separate biological replicates of cytoplasmic RNA samples were harvested and purified from each of the U-2 OS cell lines stably expressing hGRalpha, -A, -B, -C3, or D3 treated with 100 nM DEX or vehicle for 6 hours using RNeasy Midi kits (Invitrogen). These RNA samples were amplified using the Agilent Low RNA Input Fluorescent Linear Amplification Kit protocol. Starting with 0.5 ng of total RNA, two cRNAs, one labeled with Cy3 and one labeled with Cy5 were produced for each sample according to the manufacturer’s protocol. Consequently, four separate chips were used for each of the isoforms at each treatment condition, yielding a total of 40 chips: 5 isoforms X 2 treatments (vehicle vs. hormone) X 2 biological replicates X 2 labeling dyes. For each two-color comparison, 750 ng of each Cy3 and Cy5 labeled cRNAs were mixed and fragmented using the Agilent In Situ Hybridization Kit protocol. Hybridizations were performed for 16 hours in a rotating hybridization oven using the Agilent 60-mer oligo microarray processing protocol. Slides were washed as indicated in this protocol and then scanned with an Agilent Scanner. Data were obtained using the Agilent Feature Extraction software (v7.1), using defaults for all parameters. Keywords: other
2005-06-20 | GSE2428 | GEO
Project description:The microarray contains 9360 reporters, each present four times on the microarray. In our analysis 1326 human and viral reporters were used, of which 880 are unique human mature microRNAs. The other 8024 reporters represent microRNAs from other species. cDNA was generated using 1 μg of total RNA per sample. RNA was labeled only with Hy3 containing dye using the microRNACURY LNA™ microRNA Hy3 Power labeling kit (Exiqon, Denmark) according to the manufacturer’s protocol in a total volume of 25 μl. To adjust the volume to 100 μl, a hybridization buffer provided in miRCURY LNA™ microRNA Array, 5th generation kit (Exiqon, Denmark) was used.
2012-08-07 | GSE31252 | GEO
Project description:Total RNA from each sample was quantified using the NanoDrop ND-1000. The sample preparation and microarray hybridization were performed based on the Arraystar’s standard protocols. Briefly, total RNA from each sample was amplified and transcribed into fluorescent cRNA utilizing random primer according to Arraystar’s Super RNA Labeling protocol (Arraystar Inc.). The labeled cRNAs were hybridized onto the Arraystar Human circRNA Array (6x7K, Arraystar). After having washed the slides, the arrays were scanned by the Axon GenePix 4000B microarray scanner.
2021-02-08 | E-MTAB-10125 | biostudies-arrayexpress