High-speed live cell interferometry for screening bioprinted organoids
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE218693 | GEO | 2022/11/26
REPOSITORIES: GEO
Similar Datasets
Project description:We compared kidney organoids generated manually ('Man') to those generated by bioprinting single cell deposition ('R0') and thin bioprinted lines ('R40').
2020-09-01 | GSE152014 | GEO
Project description:We engineered a native-like 3D-oBRB tissue by bioprinting endothelial cells, pericytes, and fibroblasts on the basal side of a biodegradable scaffold and establishing an RPE monolayer on top. To investigate the communication between endothelial cells, fibroblasts, pericytes and retinal pigment epithelial cells, we grew them as either 2D cell cultures or as 3D bioprinted outer blood retinal barrier tissues and harvested cells for single-cell RNAseq after 6 weeks of maturation.
2022-10-21 | GSE214928 | GEO
Project description:These files represent single cell RNA-Seq data generated on a 10x Chromium genomics platform from bioprinted iPSC-derived human kidney organoids differentiated according to our published protocol (Takasato et al., Nature Protocols 2016). The data contains >2000 cells that passed our QC. Data was used to confirm that bioprinted organoids contain a similar cellular composition as standard manually produced organoids - See https://www.biorxiv.org/content/10.1101/505396v1.
2020-09-01 | GSE138835 | GEO
Project description:Pterygium is an ocular surface disorder with high prevalence that can lead to vision impairment. As a pathological outgrowth of conjunctiva, pterygium involves neovascularization and chronic inflammation, but its pathogenesis remains largely unknown. Over the last decade, various types of disease models have been built to study pterygium. Here, we developed a 3D multicellular in vitro pterygium model using the digital light processing (DLP)-based 3D bioprinting of human conjunctival stem cells (hCjSCs). A novel feeder-free culture system was adopted and efficiently expanded the primary hCjSCs with homogeneity, stemness and differentiation potency. The DLP-based 3D bioprinting was able to fabricate hydrogel scaffolds that support the viability and biological integrity of the encapsulated hCjSCs. The bioprinted 3D pterygium model was fabricated with hCjSCs, immune cells and vascular cells to recapitulate the disease microenvironment. Transcriptomic analysis using RNA sequencing (RNA-seq) identified a distinct profile correlated to inflammation response, angiogenesis, and epithelial mesenchymal transition in the bioprinted 3D pterygium model. In addition, the pterygium signatures and disease relevance of the bioprinted model were validated with the public RNA-seq data from patient-derived pterygium tissues. By integrating the stem cell technology and 3D bioprinting, this is the first reported 3D in vitro disease model for pterygium that can be utilized by future studies towards the personalized medicine and the drug screening.
2022-06-01 | GSE180343 | GEO
Project description:Bioprinting is an emerging additive manufacturing approach to the fabrication of patient-specific, implantable three-dimensional (3D) constructs for regenerative medicine. However, developing cell-compatible bioinks with high printability, structural stability, biodegradability, and bioactive characteristics is still a primary challenge for translating 3D bioprinting technology to preclinical and clinal models. To overcome this challenge, we develop a nanoengineered ionic covalent entanglement (NICE) bioink formulation for 3D bone bioprinting. The NICE bioinks allow precise control over printability, mechanical properties, and degradation characteristics, enabling custom 3D fabrication of mechanically resilient, cellularized structures. We demonstrate cell- induced remodeling of 3D bioprinted scaffolds over 60 days, demonstrating deposition of nascent extracellular matrix proteins. Interestingly, the bioprinted constructs induce endochondral differentiation of encapsulated human mesenchymal stem cells (hMSCs) in absence of osteoinducing agents such as dexamethasone or bone morphogenic protein-2 (BMP-2). Using next-generation transcriptome sequencing (RNA-seq) technology, we establish the role of nanosilicates, a bioactive component of NICE bioink, to stimulate endochondral differentiation at the transcriptome level. Overall, the osteoinductive bioink has the ability to induce formation of osteo-related mineralized extracellular matrix by encapsulatedhMSCsingrowthfactor-freeconditions.Furthermore,wedemonstratedtheabilityofNICEbioinktofabricatepatient-specific, implantable 3D scaffolds for repair of craniomaxillofacial bone defects. We envision transformation of this NICE bioink technology toward a realistic clinical process for 3D bioprinting patient-specific bone tissue for regenerative medicine.
2020-03-04 | GSE146309 | GEO
Project description:Bulk RNA-seq comparison of kidney organoids bioprinted in 3 different conformations with varying starting cell densities. Density is dictated by the ratio of bioprinter tip movement to the amount of extrusion, where higher ratios spread cells over a larger surface area. We compare organoids printed with no movement ('blob', ratio 0) to those with moderate ('line 3', ratio 20) or high movement ('line 1', ratio 40).
2020-09-01 | GSE138733 | GEO
Project description:Simultaneous differentiation of human induced pluripotent stem cells (hiPSCs) into divergent cell types offers a pathway to achieving tailorable cellular complexity, patterned architecture, and function in engineered human organoids and tissues. Recent transcription factor (TF) overexpression protocols typically produce a single cell type of interest rather than the multitude of cell types and structural organization found in native human tissues. Here, we report an orthogonal induced differentiation platform, wherein pluripotent cells are simultaneously co-differentiated into distinct cell types to generate organoids and bioprinted tissues with controlled composition and organization. To demonstrate this platform, we differentiated endothelial cells and neurons from hiPSCs in a one-pot system containing either neural or endothelial stem cell-specifying media. By aggregating inducible-TF and wild type hiPSCs into pooled and multicore-shell embryoid bodies, we produced vascularized and patterned cortical organoids within days. Using multimaterial 3D bioprinting, we patterned 3D neural tissues from densely cellular, matrix-free stem cell inks that underwent orthogonal induced differentiation to generate distinct layered regions composed of neural stem cells, endothelium, and neurons, respectively. Given the high proliferative capacity and patient-specificity of hiPSCs, our platform provides a facile route for programming cells and multicellular tissues for drug screening and therapeutic applications.
2022-01-11 | GSE193148 | GEO
Project description:Simultaneous differentiation of human induced pluripotent stem cells (hiPSCs) into divergent cell types offers a pathway to achieving tailorable cellular complexity, patterned architecture, and function in engineered human organoids and tissues. Recent transcription factor (TF) overexpression protocols typically produce a single cell type of interest rather than the multitude of cell types and structural organization found in native human tissues. Here, we report an orthogonal induced differentiation platform, wherein pluripotent cells are simultaneously co-differentiated into distinct cell types to generate organoids and bioprinted tissues with controlled composition and organization. To demonstrate this platform, we differentiated endothelial cells and neurons from hiPSCs in a one-pot system containing either neural or endothelial stem cell-specifying media. By aggregating inducible-TF and wild type hiPSCs into pooled and multicore-shell embryoid bodies, we produced vascularized and patterned cortical organoids within days. Using multimaterial 3D bioprinting, we patterned 3D neural tissues from densely cellular, matrix-free stem cell inks that underwent orthogonal induced differentiation to generate distinct layered regions composed of neural stem cells, endothelium, and neurons, respectively. Given the high proliferative capacity and patient-specificity of hiPSCs, our platform provides a facile route for programming cells and multicellular tissues for drug screening and therapeutic applications.
2022-01-11 | GSE193102 | GEO
Project description:We present a novel bioprinted array model of calcific aortic valve disease. Additionally, we utilize LC-MS/MS based proteomics to characterize cellular and extracellular vesicle proteomics of valve disease models compared to native diseased tissue as a metric of disease recapitulation.
2024-02-26 | PXD042952 | Pride
Project description:Brain tumors are dynamic complex ecosystems with multiple cell types. To model the brain tumor microenvironment in a reproducible and scalable system, we developed a rapid three-dimensional (3D) bioprinting method to construct clinically relevant biomimetic tissue models. In recurrent glioblastoma, macrophages/microglia prominently contribute to the tumor mass. To parse the function of macrophages in 3D, we compared the growth of glioblastoma stem cells (GSCs) alone or with astrocytes and neural precursor cells (NPCs) in a hyaluronic acid (HA)-rich hydrogel, with or without macrophages. Bioprinted constructs integrating macrophage recapitulate patient-derived transcriptional profiles predictive of patient survival, maintenance of stemness, invasion, and drug resistance. Whole genome CRISPR screening with bioprinted complex systems identified unique molecular dependencies in GSCs, relative to sphere culture. Multicellular bioprinted models serve as a scalable and physiologic platform to interrogate drug sensitivity, cellular crosstalk, invasion, context-dependent functional dependencies, as well as immunologic interactions in a species-matched neural environment.
2020-11-09 | GSE147147 | GEO