The transitional cerebellar progenitor is a technical artifact driven by low-quality cells [re-analysis]
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
PROVIDER: GSE295804 | GEO | 2025/07/30
REPOSITORIES: GEO
Similar Datasets
Project description:In Hymenoptera, sex is determined by a single-locus complementary sex determining system (sl-CSD). Males are normally haploid (hemizygous at the sl-CSD locus) but if the genotype of the sl-CSD locus is homozygous, they develop into diploid males. Here, we study the effects of ploidy and the sl-CSD-locus genotype by comparing gene expression differences between haploid males, diploid males and virgin queens at three developmental stages, pupae, 1 day and 11 days after eclosion. Keywords: diploid males, sl-CSD, ploidy-spcific gene, sex-specific gene, doublesex, sex-biased gene Six-condition experiment: haploid male pupae, diploid male pupae, queen pupae, 1-day-old haploid male adults, 1-day-old diploid male adults, 1-day-old queen adults (accession number GSM1031732 - GSM1031734, GSM1031737 - GSM1031738, GSM1031740 - GSM1031742, GSM1031745 - GSM1031746; reprocessed for this study), 11-day-old haploid male adults, 11-day-old diploid male adults, 11-day-old queen adults (accession number GSM1031748 - GSM1031750, GSM1031753 - GSM1031754, GSM1031756 - GSM1031758, GSM1031761 - GSM1031762; reprocessed for this study). Biological replicates: 5 colonies (x 2 genotypes for each colony). Samples were labeled with Cy3 and were compared to the same common reference RNA labeled with Cy5.
2012-12-06 | E-GEOD-42494 | biostudies-arrayexpress
Project description:In Hymenoptera, sex is determined by a single-locus complementary sex determining system (sl-CSD). Males are normally haploid (hemizygous at the sl-CSD locus) but if the genotype of the sl-CSD locus is homozygous, they develop into diploid males. Here, we study the effects of ploidy and the sl-CSD-locus genotype by comparing gene expression differences between haploid males, diploid males and virgin queens at three developmental stages, pupae, 1 day and 11 days after eclosion. Keywords: diploid males, sl-CSD, ploidy-spcific gene, sex-specific gene, doublesex, sex-biased gene Six-condition experiment: haploid male pupae, diploid male pupae, queen pupae, 1-day-old haploid male adults, 1-day-old diploid male adults, 1-day-old queen adults (accession number GSM1031732 - GSM1031734, GSM1031737 - GSM1031738, GSM1031740 - GSM1031742, GSM1031745 - GSM1031746; reprocessed for this study), 11-day-old haploid male adults, 11-day-old diploid male adults, 11-day-old queen adults (accession number GSM1031748 - GSM1031750, GSM1031753 - GSM1031754, GSM1031756 - GSM1031758, GSM1031761 - GSM1031762; reprocessed for this study). Biological replicates: 5 colonies (x 2 genotypes for each colony). Samples were labeled with Cy3 and were compared to the same common reference RNA labeled with Cy5.
2012-12-06 | E-GEOD-42785 | biostudies-arrayexpress
Project description:In Hymenoptera, sex is determined by a single-locus complementary sex determining system (sl-CSD). Males are normally haploid (hemizygous at the sl-CSD locus) but if the genotype of the sl-CSD locus is homozygous, they develop into diploid males. Here, we study the effects of ploidy and the sl-CSD-locus genotype by comparing gene expression differences between haploid males, diploid males and virgin queens at three developmental stages, pupae, 1 day and 11 days after eclosion. Keywords: diploid males, sl-CSD, ploidy-spcific gene, sex-specific gene, doublesex, sex-biased gene Six-condition experiment: haploid male pupae, diploid male pupae, queen pupae, 1-day-old haploid male adults, 1-day-old diploid male adults, 1-day-old queen adults (accession number GSM1031732 - GSM1031734, GSM1031737 - GSM1031738, GSM1031740 - GSM1031742, GSM1031745 - GSM1031746; reprocessed for this study), 11-day-old haploid male adults, 11-day-old diploid male adults, 11-day-old queen adults (accession number GSM1031748 - GSM1031750, GSM1031753 - GSM1031754, GSM1031756 - GSM1031758, GSM1031761 - GSM1031762; reprocessed for this study). Biological replicates: 5 colonies (x 2 genotypes for each colony). Samples were labeled with Cy3 and were compared to the same common reference RNA labeled with Cy5.
2012-12-06 | E-GEOD-42779 | biostudies-arrayexpress
Project description:Enhanced cross-linking immunoprecipitation (eCLIP) featuring a size-matched input control has been recently applied to profile the binding sites of more than one hundred RNA binding proteins (RBPs). However computational pipelines and quality control metrics needed to process CLIP data at scale have yet to be well defined. Here, we describe our ENCODE eCLIP processing pipeline (https://github.com/YeoLab/eclip), enabling users to go from raw reads to processed peaks that are enriched above paired input, reproducible across biological replicates, and can be directly compared against the public ENCODE eCLIP resource. In particular, we discuss processing steps designed to address common artifacts, including properly quantifying unique RNA fragments bound by both unique genomic- and repetitive element-mapped reads. Using manual quality annotation of 350 ENCODE eCLIP experiments, we develop metrics for quality assessment of eCLIP experiments prior to and after sequencing, including library yield, number of unique fragments in the library, total binding relative information, and biological reproducibility. In particular, we quantify the commonly believed linkage between depth of sequencing and peak discovery, and derive methods for estimating required sequencing depth based on pre-sequencing metrics. Finally we provide recommendations for the common question of integrating RBP binding information with RNA-seq to generate splicing maps representing the positional effect of binding on alternative splicing. These pipelines and QC metrics enable large-scale processing and analysis of eCLIP data, and will help to standardize rigorous analysis of RBP binding data.
2018-06-08 | GSE107767 | GEO
Project description:Enhanced cross-linking immunoprecipitation (eCLIP) featuring a size-matched input control has been recently applied to profile the binding sites of more than one hundred RNA binding proteins (RBPs). However computational pipelines and quality control metrics needed to process CLIP data at scale have yet to be well defined. Here, we describe our ENCODE eCLIP processing pipeline (https://github.com/YeoLab/eclip), enabling users to go from raw reads to processed peaks that are enriched above paired input, reproducible across biological replicates, and can be directly compared against the public ENCODE eCLIP resource. In particular, we discuss processing steps designed to address common artifacts, including properly quantifying unique RNA fragments bound by both unique genomic- and repetitive element-mapped reads. Using manual quality annotation of 350 ENCODE eCLIP experiments, we develop metrics for quality assessment of eCLIP experiments prior to and after sequencing, including library yield, number of unique fragments in the library, total binding relative information, and biological reproducibility. In particular, we quantify the commonly believed linkage between depth of sequencing and peak discovery, and derive methods for estimating required sequencing depth based on pre-sequencing metrics. Finally we provide recommendations for the common question of integrating RBP binding information with RNA-seq to generate splicing maps representing the positional effect of binding on alternative splicing. These pipelines and QC metrics enable large-scale processing and analysis of eCLIP data, and will help to standardize rigorous analysis of RBP binding data.
2018-06-08 | GSE107766 | GEO
Project description:Microarray technology provides a powerful tool for defining gene expression profiles of airway epithelium that lend insight into the pathogenesis of human airway disorders. The focus of this study was to establish rigorous quality control parameters to ensure that microarray assessment of the airway epithelium is not confounded by experimental artifact. Samples (total n=223) of trachea, large and small airway epithelium were collected by fiberoptic bronchoscopy of 144 individuals (42 healthy non-smokers, 49 healthy smokers, 11 symptomatic smokers, 22 smokers with lone emphysema with normal spirometry, and 20 smokers with COPD) were processed and hybridized to Affymetrix HG-U133 2.0 Plus microarrays. The pre- and post-chip quality control (QC) criteria established, included: (1) RNA quality, assessed by RNA Integrity Number (RIN) ≥7.0 using Agilent 2100 Bioanalyzer software; (2) cRNA transcript integrity, assessed by signal intensity ratio of GAPDH 3' to 5' probe sets ≤3.0; and (3) the multi-chip normalization scaling factor ≤10.0 Of the 223 samples, 213 (95.5%) passed the QC criteria. In a data set of 34 arrays (10 samples failing QC criteria, 24 randomly chosen samples passing QC criteria), correlation coefficients for pairwise comparisons of expression levels for 100 housekeeping genes in which at least one array failed the QC criteria were significantly lower (average Pearson r = 0.90 ± 0.04) and more broadly dispersed than correlation coefficients for pairwise comparisons between any two arrays that passed the QC criteria (average Pearson r = 0.97 ± 0.01). By using the QC cutoff criteria, the inter-array variability, as assessed by the coefficient of variation in the expression levels for 100 housekeeping genes, was reduced from 35.7% to 21.7%. Based on the aberrant housekeeping gene data generated from samples failing the established QC criteria, we propose that the QC criteria outlined in this study can accurately distinguish high quality from low quality data and can be used to delete poor quality microarray samples before proceeding to higher-order biological analyses and interpretation. Affymetrix arrays were used to assess the quality of gene expression data in trachea, large airway and small airway epithelium obtained by fiberoptic bronchoscopy of 42 healthy non-smokers, 49 healthy smokers, 11 symptomatic smokers, 22 smokers with lone emphysema with normal spirometry, and 20 smokers with COPD.
2010-09-19 | E-GEOD-11906 | biostudies-arrayexpress
Project description:Microarray technology provides a powerful tool for defining gene expression profiles of airway epithelium that lend insight into the pathogenesis of human airway disorders. The focus of this study was to establish rigorous quality control parameters to ensure that microarray assessment of the airway epithelium is not confounded by experimental artifact. Samples (total n=223) of trachea, large and small airway epithelium were collected by fiberoptic bronchoscopy of 144 individuals (42 healthy non-smokers, 49 healthy smokers, 11 symptomatic smokers, 22 smokers with lone emphysema with normal spirometry, and 20 smokers with COPD) were processed and hybridized to Affymetrix HG-U133 2.0 Plus microarrays. The pre- and post-chip quality control (QC) criteria established, included: (1) RNA quality, assessed by RNA Integrity Number (RIN) ≥7.0 using Agilent 2100 Bioanalyzer software; (2) cRNA transcript integrity, assessed by signal intensity ratio of GAPDH 3' to 5' probe sets ≤3.0; and (3) the multi-chip normalization scaling factor ≤10.0 Of the 223 samples, 213 (95.5%) passed the QC criteria. In a data set of 34 arrays (10 samples failing QC criteria, 24 randomly chosen samples passing QC criteria), correlation coefficients for pairwise comparisons of expression levels for 100 housekeeping genes in which at least one array failed the QC criteria were significantly lower (average Pearson r = 0.90 ± 0.04) and more broadly dispersed than correlation coefficients for pairwise comparisons between any two arrays that passed the QC criteria (average Pearson r = 0.97 ± 0.01). By using the QC cutoff criteria, the inter-array variability, as assessed by the coefficient of variation in the expression levels for 100 housekeeping genes, was reduced from 35.7% to 21.7%. Based on the aberrant housekeeping gene data generated from samples failing the established QC criteria, we propose that the QC criteria outlined in this study can accurately distinguish high quality from low quality data and can be used to delete poor quality microarray samples before proceeding to higher-order biological analyses and interpretation.
2010-09-20 | GSE11906 | GEO
Project description:Five-vertebrate ChIP-seq reveals the evolutionary dynamics of trancription factor binding. The SRF files for this experiment can be found in the European Read Archive with study accession number ERP000054. The fastq files can be found in the raw archives and for some assays links to the ENA runs and ENA fastq files are provided.
2010-04-08 | E-TABM-722 | biostudies-arrayexpress
Project description:Fresh fish are highly perishable food products and their short shelf-life limits their commercial exploitation, leads to waste and has a negative impact on aquaculture sustainability. New non-thermal food processing methods, such as High pressure (HP), are being investigated to prolong shelf-life while assuring high food quality. We applied several tools to evaluate the impacts of HP processing on European sea bass (Dicentrarchus labrax) fillets quality and shelf life. The data here presented includes visual and physical measurements of flesh quality and the microbiome and proteome profiles of control and HP-processed sea bass fillets (600MPa, 25ºC, 5min), after isothermal storage (2°C) for different periods ranging from 1 to 67 days. Color (L-, a- and b- values) change and texture (hardness, cohesiveness and adhesiveness) parameters were obtained by using appropriate colorimeter and texture analyser, respectively, during refrigerated storage. Bacterial diversity was analysed by Illumina high-throughput sequencing of the 16S rRNA gene in five pooled DNAs from control or HP-processed fillets after 1, 11 or 67 days and the raw reads were deposited in the NCBI-SRA database with accession number PRJNA517618. In addition, high-throughput sequencing of the internal transcribed spacer (ITS) region targeting yeast and moulds was run for control or HP-processed fillets at the end of storage (11 or 67 days, respectively), being deposited under SRA accession PRJNA517779. Quantitative label-free proteomics profiles were analysed by SWATH-MS (Sequential Windowed data independent Acquisition of the Total High-resolution-Mass Spectra) in myofibrillar or sarcoplasmic enriched protein extracts pooled for control or HP-processed filets after short (1d) or long-term (11-67 days) storage. These data support the findings reported in “High pressure processing of European sea bass (Dicentrarchus labrax) fillets and tools for flesh quality and shelf life monitoring” (Tsironi et al. 2019).
2019-11-06 | PXD012737 | Pride
Project description:MicroArray Quality Control (MAQC) Project
| PRJNA96213 | ENA